On 11.01.2011 18:42, Takashi Iwai wrote:
At Tue, 11 Jan 2011 18:33:53 +0200, Anssi Hannula wrote:
(restored CC I removed, sorry about that)
On 10.01.2011 22:36, Takashi Iwai wrote:
At Mon, 10 Jan 2011 21:58:26 +0200, Anssi Hannula wrote:
Takashi Iwai kirjoitti:
At Sun, 02 Jan 2011 12:16:44 +0200, Anssi Hannula wrote:
Hi!
Takashi, it seems the "allow all when not plugged in" behaviour you implemented in bbbe3390 is not enough to allow applications to open the device before the output device is ready. Switched-off A/V receivers may provide the information of the plugged-in television which usually restricts the max_channels to 2, causing applications to fail opening the device with more channels when a the A/V receiver is switched off.
Also, even if the application can gracefully fallback to stereo, AFAIK there is no method for an application to get informed when the limitation is lifted, so it can't automatically resume multichannel output when the A/V receiver is switched on again.
Based on this info, I guess the restrictions based on ELD should be removed :/ Unless you have some other ideas to fix the issue, of course.
What about the patch below? If it's unplugged, the valid flag should be cleared, so the next open fall backs to the default state (i.e. allows all).
But it is not unplugged. The multichannel-capable receiver forwards EDID of TV which doesn't allow more than 2 channels, when the receiver is swtiched off.
Well, in that case, this is the correct behavior, IMO. At this moment, setting channels to 2 is the right thing.
Well, I don't like this at all for two reasons:
- This common use case worked with earlier kernel revisions: You could
start playback of a video / TV channel, then go sit on a couch and start up the A/V receiver to get surround sound. Now it is broken.
Yeah, this is a drawback of the "fix", though. In the earlier driver version, if you send incompatible setups that don't match with the actual device, it simply doesn't work. Now it makes working.
- There is no way this can be fixed in the libalsa-using application
either, as it doesn't receive a notification when more channels become available after it has already fallbacked to stereo.
So we got something reasonable that worked before but not with 2.6.36+.
It depends on the definition "reasonable" :)
Then, how can you know that more channels will be available in future at all?
We don't. However, we don't know that about any analog line-outs either, yet we always allow all channels no matter what amount of speakers are plugged in (AFAIK) (assuming jack detection support).
But there have been already systems which PCM configuration changes dynamically. So, sane apps are supposed to re-open if needed (e.g. multi-channel open failed).
Yep. It really should get a notification to allow switching to multichannel later (dunno what that would look like, I don't know the ALSA api well).
I guess something simpler (looking from the application side) would be something to allow forcing open if the sink doesn't support the mode but the card does.
Anyway, reverting the whole idea seems like nonsense as well, since the current behavior works more or less for many other cases. An easy solution would be to add a module option as I posted. In that way, you can switch the behavior dynamically. For ones who require the static configuration, set the option to true. For others, set the option false.
Yes, it would indeed be the easiest solution.
Takashi
What you want to have a static configuration way by ignoring the ELD information. But, the interface isn't pretty easy if it's implemented in control API, I suppose.
Takashi
Takashi
diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index d1b1b57..27e8597 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -827,7 +827,7 @@ static int hdmi_pcm_open(struct hda_pcm_stream *hinfo, *codec_pars = *hinfo;
eld = &spec->sink_eld[idx];
- if (eld->sad_count > 0) {
- if (eld->eld_valid && eld->sad_count > 0) { hdmi_eld_update_pcm_info(eld, hinfo, codec_pars); if (hinfo->channels_min > hinfo->channels_max || !hinfo->rates || !hinfo->formats)
-- Anssi Hannula
-- Anssi Hannula