Re: [alsa-devel] [PATCH v3 06/12] mfd: wm97xx-core: core support for wm97xx Codec

On Fri, Jun 30, 2017 at 09:44:02PM +0200, Robert Jarzmik wrote:

The WM9705, WM9712 and WM9713 are highly integrated codecs, with an audio codec, DAC and ADC, GPIO unit and a touchscreen interface.

Historically the support was spread across drivers/input/touchscreen and sound/soc/codecs. The sharing was done through ac97 bus sharing. This model will not withstand the new AC97 bus model, where codecs are discovered on runtime.

Signed-off-by: Robert Jarzmik robert.jarzmik@free.fr

drivers/mfd/Kconfig | 14 +++ drivers/mfd/Makefile | 1 + drivers/mfd/wm97xx-core.c | 282 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/mfd/wm97xx.h | 31 +++++ 4 files changed, 328 insertions(+) create mode 100644 drivers/mfd/wm97xx-core.c create mode 100644 include/linux/mfd/wm97xx.h

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 55ecdfb74d31..440677bac5c9 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1628,6 +1628,20 @@ config MFD_WM8994 core support for the WM8994, in order to use the actual functionaltiy of the device other drivers must be enabled.

+config MFD_WM97xx

• tristate "Wolfson Microelectronics WM97xx"
• select MFD_CORE
• select REGMAP_AC97
• select AC97_BUS_COMPAT if AC97_BUS_NEW
• help

•  The WM9705, WM9712 and WM9713 is a highly integrated hi-fi CODEC
  

•  designed for smartphone applications.  As well as audio functionality
  

•  it has on board GPIO and a touchscreen functionality which is
  

•  supported via the relevant subsystems.  This driver provides core
  

•  support for the WM97xx, in order to use the actual functionaltiy of
  

•  the device other drivers must be enabled.
  

config MFD_STW481X tristate "Support for ST Microelectronics STw481x" depends on I2C && (ARCH_NOMADIK || COMPILE_TEST) diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 31ce07611a6f..902c2e46f310 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o wm8994-objs := wm8994-core.o wm8994-irq.o wm8994-regmap.o obj-$(CONFIG_MFD_WM8994) += wm8994.o +obj-$(CONFIG_MFD_WM97xx) += wm97xx-core.o

obj-$(CONFIG_TPS6105X) += tps6105x.o obj-$(CONFIG_TPS65010) += tps65010.o diff --git a/drivers/mfd/wm97xx-core.c b/drivers/mfd/wm97xx-core.c new file mode 100644 index 000000000000..0813fc9fa8ed --- /dev/null +++ b/drivers/mfd/wm97xx-core.c @@ -0,0 +1,282 @@ +/*

• • Wolfson WM97xx -- Core device
• • Copyright (C) 2016 Robert Jarzmik
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License as published by
• • the Free Software Foundation; either version 2 of the License, or
• • (at your option) any later version.
• • Features:
• • • an AC97 audio codec
• • • a touchscreen driver
• • • a GPIO block
• */

+#include <linux/module.h>

+#include <linux/device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/wm97xx.h> +#include <linux/wm97xx.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <sound/ac97/codec.h> +#include <sound/ac97/compat.h>

+#define WM9705_VENDOR_ID 0x574d4c05 +#define WM9712_VENDOR_ID 0x574d4c12 +#define WM9713_VENDOR_ID 0x574d4c13 +#define WM97xx_VENDOR_ID_MASK 0xffffffff

+struct wm97xx_priv {

• struct regmap *regmap;
• struct snd_ac97 *ac97;
• struct device *dev;

+};

+static bool wm97xx_readable_reg(struct device *dev, unsigned int reg) +{

• switch (reg) {
• case AC97_RESET ... AC97_PCM_SURR_DAC_RATE:
• case AC97_PCM_LR_ADC_RATE:
• case AC97_CENTER_LFE_MASTER:
• case AC97_SPDIF ... AC97_LINE1_LEVEL:
• case AC97_GPIO_CFG ... 0x5c:
• case AC97_CODEC_CLASS_REV ... AC97_PCI_SID:
• case 0x74 ... AC97_VENDOR_ID2:

• return true;
  

• default:

• return false;
  

• }

+}

+static bool wm97xx_writeable_reg(struct device *dev, unsigned int reg) +{

• switch (reg) {
• case AC97_VENDOR_ID1:
• case AC97_VENDOR_ID2:

• return false;
  

• default:

• return wm97xx_readable_reg(dev, reg);
  

• }

+}

+static const struct reg_default wm97xx_reg_defaults[] = { +};

Should we not have some defaults in here?

+static const struct regmap_config wm9705_regmap_config = {

• .reg_bits = 16,
• .reg_stride = 2,
• .val_bits = 16,
• .max_register = 0x7e,
• .cache_type = REGCACHE_RBTREE,
• .reg_defaults = wm97xx_reg_defaults,
• .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
• .volatile_reg = regmap_ac97_default_volatile,
• .readable_reg = wm97xx_readable_reg,
• .writeable_reg = wm97xx_writeable_reg,

+};

+static const struct regmap_config wm9712_regmap_config = {

• .reg_bits = 16,
• .reg_stride = 2,
• .val_bits = 16,
• .max_register = 0x7e,
• .cache_type = REGCACHE_RBTREE,
• .reg_defaults = wm97xx_reg_defaults,
• .num_reg_defaults = ARRAY_SIZE(wm97xx_reg_defaults),
• .volatile_reg = regmap_ac97_default_volatile,
• .readable_reg = wm97xx_readable_reg,
• .writeable_reg = wm97xx_writeable_reg,

+};

+static int wm9705_register(struct wm97xx_priv *wm97xx) +{

• return 0;

+}

+static int wm9712_register(struct wm97xx_priv *wm97xx) +{

• return 0;

+}

So are we only adding stubs for the 9705 and 9712? If so we should probably make that clear in the commit message at least.

+static const struct reg_default wm9713_reg_defaults[] = {

• { 0x02, 0x8080 }, /* Speaker Output Volume */
• { 0x04, 0x8080 }, /* Headphone Output Volume */
• { 0x06, 0x8080 }, /* Out3/OUT4 Volume */
• { 0x08, 0xc880 }, /* Mono Volume */
• { 0x0a, 0xe808 }, /* LINEIN Volume */
• { 0x0c, 0xe808 }, /* DAC PGA Volume */
• { 0x0e, 0x0808 }, /* MIC PGA Volume */
• { 0x10, 0x00da }, /* MIC Routing Control */
• { 0x12, 0x8000 }, /* Record PGA Volume */
• { 0x14, 0xd600 }, /* Record Routing */
• { 0x16, 0xaaa0 }, /* PCBEEP Volume */
• { 0x18, 0xaaa0 }, /* VxDAC Volume */
• { 0x1a, 0xaaa0 }, /* AUXDAC Volume */
• { 0x1c, 0x0000 }, /* Output PGA Mux */
• { 0x1e, 0x0000 }, /* DAC 3D control */
• { 0x20, 0x0f0f }, /* DAC Tone Control*/
• { 0x22, 0x0040 }, /* MIC Input Select & Bias */
• { 0x24, 0x0000 }, /* Output Volume Mapping & Jack */
• { 0x26, 0x7f00 }, /* Powerdown Ctrl/Stat*/
• { 0x28, 0x0405 }, /* Extended Audio ID */
• { 0x2a, 0x0410 }, /* Extended Audio Start/Ctrl */
• { 0x2c, 0xbb80 }, /* Audio DACs Sample Rate */
• { 0x2e, 0xbb80 }, /* AUXDAC Sample Rate */
• { 0x32, 0xbb80 }, /* Audio ADCs Sample Rate */
• { 0x36, 0x4523 }, /* PCM codec control */
• { 0x3a, 0x2000 }, /* SPDIF control */
• { 0x3c, 0xfdff }, /* Powerdown 1 */
• { 0x3e, 0xffff }, /* Powerdown 2 */
• { 0x40, 0x0000 }, /* General Purpose */
• { 0x42, 0x0000 }, /* Fast Power-Up Control */
• { 0x44, 0x0080 }, /* MCLK/PLL Control */
• { 0x46, 0x0000 }, /* MCLK/PLL Control */
• { 0x4c, 0xfffe }, /* GPIO Pin Configuration */
• { 0x4e, 0xffff }, /* GPIO Pin Polarity / Type */
• { 0x50, 0x0000 }, /* GPIO Pin Sticky */
• { 0x52, 0x0000 }, /* GPIO Pin Wake-Up */

• 		/* GPIO Pin Status */
  

• { 0x56, 0xfffe }, /* GPIO Pin Sharing */
• { 0x58, 0x4000 }, /* GPIO PullUp/PullDown */
• { 0x5a, 0x0000 }, /* Additional Functions 1 */
• { 0x5c, 0x0000 }, /* Additional Functions 2 */
• { 0x60, 0xb032 }, /* ALC Control */
• { 0x62, 0x3e00 }, /* ALC / Noise Gate Control */
• { 0x64, 0x0000 }, /* AUXDAC input control */
• { 0x74, 0x0000 }, /* Digitiser Reg 1 */
• { 0x76, 0x0006 }, /* Digitiser Reg 2 */
• { 0x78, 0x0001 }, /* Digitiser Reg 3 */
• { 0x7a, 0x0000 }, /* Digitiser Read Back */

+};

+static const struct regmap_config wm9713_regmap_config = {

• .reg_bits = 16,
• .reg_stride = 2,
• .val_bits = 16,
• .max_register = 0x7e,
• .cache_type = REGCACHE_RBTREE,
• .reg_defaults = wm9713_reg_defaults,
• .num_reg_defaults = ARRAY_SIZE(wm9713_reg_defaults),
• .volatile_reg = regmap_ac97_default_volatile,
• .readable_reg = wm97xx_readable_reg,
• .writeable_reg = wm97xx_writeable_reg,

+};

+static int wm9713_register(struct wm97xx_priv *wm97xx,

• 	   struct wm97xx_pdata *pdata)
  

+{

• static struct wm97xx_platform_data codec_pdata;
• static const struct mfd_cell cells[] = {

• {
  

• 	.name = "wm9713-codec",
  

• 	.platform_data = &codec_pdata,
  

• 	.pdata_size = sizeof(codec_pdata),
  

• },
  

• {
  

• 	.name = "wm97xx-ts",
  

• 	.platform_data = &codec_pdata,
  

• 	.pdata_size = sizeof(codec_pdata),
  

• },
  

• };
• codec_pdata.ac97 = wm97xx->ac97;
• codec_pdata.regmap = devm_regmap_init_ac97(wm97xx->ac97,

• 				   &wm9713_regmap_config);
  

• codec_pdata.batt_pdata = pdata->batt_pdata;
• if (IS_ERR(codec_pdata.regmap))

• return PTR_ERR(codec_pdata.regmap);
  

• return devm_mfd_add_devices(wm97xx->dev, -1, cells,

Should probably use the define PLATFORM_DEVID_NONE here.

• 		    ARRAY_SIZE(cells), NULL, 0, NULL);
  

+}

+static int wm97xx_ac97_probe(struct ac97_codec_device *adev) +{

• struct wm97xx_priv *wm97xx;
• int ret;
• void *pdata = snd_ac97_codec_get_platdata(adev);
• wm97xx = devm_kzalloc(ac97_codec_dev2dev(adev),

• 	      sizeof(*wm97xx), GFP_KERNEL);
  

• if (!wm97xx)

• return -ENOMEM;
  

• wm97xx->dev = ac97_codec_dev2dev(adev);
• wm97xx->ac97 = snd_ac97_compat_alloc(adev);
• if (IS_ERR(wm97xx->ac97))

• return PTR_ERR(wm97xx->ac97);
  

• ac97_set_drvdata(adev, wm97xx);
• dev_info(wm97xx->dev, "wm97xx core found, id=0x%x\n",

•  adev->vendor_id);
  

• switch (adev->vendor_id) {
• case WM9705_VENDOR_ID:

• ret = wm9705_register(wm97xx);
  

• break;
  

• case WM9712_VENDOR_ID:

• ret = wm9712_register(wm97xx);
  

• break;
  

• case WM9713_VENDOR_ID:

• ret = wm9713_register(wm97xx, pdata);
  

• break;
  

• default:

• ret = -ENODEV;
  

• }
• if (ret)

• snd_ac97_compat_release(wm97xx->ac97);
  

• return ret;

+}

+static int wm97xx_ac97_remove(struct ac97_codec_device *adev) +{

• struct wm97xx_priv *wm97xx = ac97_get_drvdata(adev);
• snd_ac97_compat_release(wm97xx->ac97);
• return 0;

+}

+static const struct ac97_id wm97xx_ac97_ids[] = {

• { .id = WM9705_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
• { .id = WM9712_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
• { .id = WM9713_VENDOR_ID, .mask = WM97xx_VENDOR_ID_MASK },
• { }

+};

+static struct ac97_codec_driver wm97xx_ac97_driver = {

• .driver = {

• .name = "wm97xx-core",
  

• },
• .probe = wm97xx_ac97_probe,
• .remove = wm97xx_ac97_remove,
• .id_table = wm97xx_ac97_ids,

+};

+static int __init wm97xx_module_init(void) +{

• return snd_ac97_codec_driver_register(&wm97xx_ac97_driver);

+} +module_init(wm97xx_module_init);

+static void __exit wm97xx_module_exit(void) +{

• snd_ac97_codec_driver_unregister(&wm97xx_ac97_driver);

+} +module_exit(wm97xx_module_exit);

+MODULE_DESCRIPTION("WM9712, WM9713 core driver"); +MODULE_AUTHOR("Robert Jarzmik robert.jarzmik@free.fr"); +MODULE_LICENSE("GPL");

diff --git a/include/linux/mfd/wm97xx.h b/include/linux/mfd/wm97xx.h new file mode 100644 index 000000000000..627322f14d48 --- /dev/null +++ b/include/linux/mfd/wm97xx.h @@ -0,0 +1,31 @@ +/*

• • wm97xx client interface
• • Copyright (C) 2016 Robert Jarzmik
• • This program is free software; you can redistribute it and/or modify
• • it under the terms of the GNU General Public License as published by
• • the Free Software Foundation; either version 2 of the License, or
• • (at your option) any later version.
• • This program is distributed in the hope that it will be useful,
• • but WITHOUT ANY WARRANTY; without even the implied warranty of
• • MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
• • GNU General Public License for more details.
• */

+#ifndef __LINUX_MFD_WM97XX_H +#define __LINUX_MFD_WM97XX_H

+struct regmap; +struct wm97xx_batt_pdata; +struct snd_ac97;

+struct wm97xx_platform_data {

• struct snd_ac97 *ac97;
• struct regmap *regmap;
• struct wm97xx_batt_pdata *batt_pdata;

+};

+#endif

2.11.0

Other than those minor comments looks ok to me.

Thanks, Charles