Fix a misleading property description, and denote the fact that st,output-conf and st,ch*-output-mapping have to be passed as /bits/ 8.
Signed-off-by: Daniel Mack zonque@gmail.com --- Documentation/devicetree/bindings/sound/st,sta350.txt | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/st,sta350.txt b/Documentation/devicetree/bindings/sound/st,sta350.txt index 9501888..ecd7a62 100644 --- a/Documentation/devicetree/bindings/sound/st,sta350.txt +++ b/Documentation/devicetree/bindings/sound/st,sta350.txt @@ -25,6 +25,7 @@ Optional properties: 2: 2 Channel (Full-Bridge) Power, 1 Channel FFX 3: 1 Channel Mono-Parallel If parameter is missing, mode 0 will be enabled. + This property has to be specified as '/bits/ 8' value.
- st,ch1-output-mapping: Channel 1 output mapping - st,ch2-output-mapping: Channel 2 output mapping @@ -33,6 +34,7 @@ Optional properties: 1: Channel 2 2: Channel 3 If parameter is missing, channel 1 is choosen. + This properties have to be specified as '/bits/ 8' values.
- st,thermal-warning-recover: If present, thermal warning recovery is enabled. @@ -82,7 +84,7 @@ Optional properties: If not present, preset DC coefficient is used.
- st,invalid-input-detect-mute: - If not present, automatic invalid input detect mute is enabled. + If present, automatic invalid input detect mute is enabled.
@@ -93,12 +95,12 @@ codec: sta350@38 { reg = <0x1c>; reset-gpios = <&gpio1 19 0>; power-down-gpios = <&gpio1 16 0>; - st,output-conf = <0x3>; // set output to 2-channel + st,output-conf = /bits/ 8 <0x3>; // set output to 2-channel // (full-bridge) power, // 2-channel data-out - st,ch1-output-mapping = <0>; // set channel 1 output ch 1 - st,ch2-output-mapping = <0>; // set channel 2 output ch 1 - st,ch3-output-mapping = <0>; // set channel 3 output ch 1 + st,ch1-output-mapping = /bits/ 8 <0>; // set channel 1 output ch 1 + st,ch2-output-mapping = /bits/ 8 <0>; // set channel 2 output ch 1 + st,ch3-output-mapping = /bits/ 8 <0>; // set channel 3 output ch 1 st,max-power-correction; // enables power bridge // correction for THD reduction // near maximum power output