Hi Fengguang, I ran the command as requested:
$ speaker-test -Dhw:0,3 -c8 -twav
speaker-test 1.0.21
Playback device is hw:0,3 Stream parameters are 48000Hz, S16_LE, 8 channels WAV file(s) Rate set to 48000Hz (requested 48000Hz) Buffer size range from 16 to 4096 Period size range from 8 to 2048 Using max buffer size 4096 Periods = 4 was set period_size = 1024 was set buffer_size = 4096 0 - Front Left 4 - Center 1 - Front Right 7 - Side Right 3 - Rear Right 2 - Rear Left 6 - Side Left 5 - LFE Time per period = 11.306881
Unfortunately there was no audio output. :(
Thanks Steve
-------- Original Message -------- Subject: Re: Gentoo alsa output From: Wu Fengguang fengguang.wu@intel.com To: cdstealer cdstealer@cdstealer.com Cc: "alsa-devel@alsa-project.org" alsa-devel@alsa-project.org, Shane W shane-alsa@csy.ca Date: Sun Mar 21 2010 12:41:32 GMT+0000 (BST)
Hi cdstealer,
It looks all sane with HDMI audio. Would you verify HDMI playback with command
speaker-test -Dhw:0,3 -c8 -twav?
Or are there any more concerns?
Thanks, Fengguang
On Sun, Mar 21, 2010 at 05:18:18PM +0800, cdstealer wrote:
Hi fengguang, Many thanks for jumping on this. I have run the script and uploaded the result to:
http://www.alsa-project.org/db/?f=dbfb35a717aebac5b2650fb9dcf649e1a031ebc0
If you need anything further, please don't hesitate to contact me.
Kind regards Steve