Hey, its posted for others, but I am unsubscribing to the list, so future correspondence should be direct to email.
On Mon, Feb 8, 2016 at 7:53 AM, Erik Friesen friesendrywall@gmail.com wrote:
I find that the codec is getting a write failure at sgtl5000_fill_defaults at
{ SGTL5000_CHIP_ANA_POWER, 0x7060 },
about half the time following a software reboot, and with external vddd powered with 1.8v. Reading this register shows that it is already at 0x7060, so I am not sure what is up with that, but I would suspect a hardware bug in the codec.
Using this code has fixed this so far.
static int sgtl5000_fill_defaults(struct sgtl5000_priv *sgtl5000) { int i, ret, val, index; int reg; for (i = 0; i < ARRAY_SIZE(sgtl5000_reg_defaults); i++) { val = sgtl5000_reg_defaults[i].def; index = sgtl5000_reg_defaults[i].reg; ret = regmap_read(sgtl5000->regmap, index, ®); if (ret) { printk(KERN_WARNING "SGTL5000 probe read failed at %i\n", i); return ret; } if (reg != val) { ret = regmap_write(sgtl5000->regmap, index, val); } if (ret) { printk(KERN_WARNING "SGTL5000 probe write failed %x at %i index %i @ %x\n", val, i, index, reg); return ret; } } return 0; }