The SAI has multiple successive FIFO registers, but in some use case the required dataline/FIFOs are not successive, so need get such information from dts property "fsl,dataline"
fsl,dataline has 3 values for each configuration: first one means the type: I2S(1) or DSD(2), second one is dataline mask for 'rx', third one is dataline mask for 'tx'.
Also set dma peripheral address and TRCE bits according to data lane.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Signed-off-by: Viorel Suman viorel.suman@nxp.com --- sound/soc/fsl/fsl_sai.c | 161 +++++++++++++++++++++++++++++++++++++++- sound/soc/fsl/fsl_sai.h | 17 +++++ 2 files changed, 174 insertions(+), 4 deletions(-)
diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index 86aa0baba848..f5eabb0b10e8 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -487,13 +487,18 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, unsigned int ofs = sai->soc_data->reg_offset; bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK; unsigned int channels = params_channels(params); + struct snd_dmaengine_dai_dma_data *dma_params; + struct fsl_sai_dl_cfg *dl_cfg = sai->dl_cfg; u32 word_width = params_width(params); + int trce_mask = 0, dl_cfg_idx = 0; + int dl_cfg_cnt = sai->dl_cfg_cnt; + u32 dl_type = FSL_SAI_DL_I2S; u32 val_cr4 = 0, val_cr5 = 0; u32 slots = (channels == 1) ? 2 : channels; u32 slot_width = word_width; int adir = tx ? RX : TX; u32 pins, bclk; - int ret; + int ret, i;
if (sai->slots) slots = sai->slots; @@ -507,8 +512,22 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, * PDM mode, channels are independent * each channels are on one dataline/FIFO. */ - if (sai->is_pdm_mode) + if (sai->is_pdm_mode) { pins = channels; + dl_type = FSL_SAI_DL_PDM; + } + + for (i = 0; i < dl_cfg_cnt; i++) { + if (dl_cfg[i].type == dl_type && dl_cfg[i].pins[tx] == pins) { + dl_cfg_idx = i; + break; + } + } + + if (hweight8(dl_cfg[dl_cfg_idx].mask[tx]) < pins) { + dev_err(cpu_dai->dev, "channel not supported\n"); + return -EINVAL; + }
bclk = params_rate(params) * (sai->bclk_ratio ? sai->bclk_ratio : slots * slot_width);
@@ -571,13 +590,28 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream, FSL_SAI_CR5_FBT_MASK, val_cr5); }
- if (sai->soc_data->pins > 1) + if (hweight8(dl_cfg[dl_cfg_idx].mask[tx]) <= 1) + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), + FSL_SAI_CR4_FCOMB_MASK, 0); + else regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), FSL_SAI_CR4_FCOMB_MASK, FSL_SAI_CR4_FCOMB_SOFT);
+ dma_params = tx ? &sai->dma_params_tx : &sai->dma_params_rx; + dma_params->addr = sai->res->start + FSL_SAI_xDR0(tx) + + dl_cfg[dl_cfg_idx].start_off[tx] * 0x4; + + /* Find a proper tcre setting */ + for (i = 0; i < sai->soc_data->pins; i++) { + trce_mask = (1 << (i + 1)) - 1; + if (hweight8(dl_cfg[dl_cfg_idx].mask[tx] & trce_mask) == pins) + break; + } + regmap_update_bits(sai->regmap, FSL_SAI_xCR3(tx, ofs), FSL_SAI_CR3_TRCE_MASK, - FSL_SAI_CR3_TRCE((1 << pins) - 1)); + FSL_SAI_CR3_TRCE((dl_cfg[dl_cfg_idx].mask[tx] & trce_mask))); + regmap_update_bits(sai->regmap, FSL_SAI_xCR4(tx, ofs), FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK | FSL_SAI_CR4_CHMOD_MASK, @@ -1068,6 +1102,118 @@ static int fsl_sai_check_version(struct device *dev) return 0; }
+/* + * Calculate the offset between first two datalines, don't + * different offset in one case. + */ +static unsigned int fsl_sai_calc_dl_off(unsigned long dl_mask) +{ + int fbidx, nbidx, offset; + + fbidx = find_first_bit(&dl_mask, FSL_SAI_DL_NUM); + nbidx = find_next_bit(&dl_mask, FSL_SAI_DL_NUM, fbidx + 1); + offset = nbidx - fbidx - 1; + + return (offset < 0 || offset >= (FSL_SAI_DL_NUM - 1) ? 0 : offset); +} + +/* + * read the fsl,dataline property from dts file. + * It has 3 value for each configuration, first one means the type: + * I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is + * dataline mask for 'tx'. for example + * + * fsl,dataline = <1 0xff 0xff 2 0xff 0x11>, + * + * It means I2S type rx mask is 0xff, tx mask is 0xff, PDM type + * rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). + * + */ +static int fsl_sai_read_dlcfg(struct fsl_sai *sai) +{ + struct platform_device *pdev = sai->pdev; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + int ret, elems, i, index, num_cfg; + char *propname = "fsl,dataline"; + struct fsl_sai_dl_cfg *cfg; + unsigned long dl_mask; + unsigned int soc_dl; + u32 rx, tx, type; + + elems = of_property_count_u32_elems(np, propname); + + if (elems <= 0) { + elems = 0; + } else if (elems % 3) { + dev_err(dev, "Number of elements must be divisible to 3.\n"); + return -EINVAL; + } + + num_cfg = elems / 3; + /* Add one more for default value */ + cfg = devm_kzalloc(&pdev->dev, (num_cfg + 1) * sizeof(*cfg), GFP_KERNEL); + if (!cfg) + return -ENOMEM; + + /* Consider default value "0 0xFF 0xFF" if property is missing */ + soc_dl = BIT(sai->soc_data->pins) - 1; + cfg[0].type = FSL_SAI_DL_DEFAULT; + cfg[0].pins[0] = sai->soc_data->pins; + cfg[0].mask[0] = soc_dl; + cfg[0].start_off[0] = 0; + cfg[0].next_off[0] = 0; + + cfg[0].pins[1] = sai->soc_data->pins; + cfg[0].mask[1] = soc_dl; + cfg[0].start_off[1] = 0; + cfg[0].next_off[1] = 0; + for (i = 1, index = 0; i < num_cfg + 1; i++) { + /* + * type of dataline + * 0 means default mode + * 1 means I2S mode + * 2 means PDM mode + */ + ret = of_property_read_u32_index(np, propname, index++, &type); + if (ret) + return -EINVAL; + + ret = of_property_read_u32_index(np, propname, index++, &rx); + if (ret) + return -EINVAL; + + ret = of_property_read_u32_index(np, propname, index++, &tx); + if (ret) + return -EINVAL; + + if ((rx & ~soc_dl) || (tx & ~soc_dl)) { + dev_err(dev, "dataline cfg[%d] setting error, mask is 0x%x\n", i, soc_dl); + return -EINVAL; + } + + rx = rx & soc_dl; + tx = tx & soc_dl; + + cfg[i].type = type; + cfg[i].pins[0] = hweight8(rx); + cfg[i].mask[0] = rx; + dl_mask = rx; + cfg[i].start_off[0] = find_first_bit(&dl_mask, FSL_SAI_DL_NUM); + cfg[i].next_off[0] = fsl_sai_calc_dl_off(rx); + + cfg[i].pins[1] = hweight8(tx); + cfg[i].mask[1] = tx; + dl_mask = tx; + cfg[i].start_off[1] = find_first_bit(&dl_mask, FSL_SAI_DL_NUM); + cfg[i].next_off[1] = fsl_sai_calc_dl_off(tx); + } + + sai->dl_cfg = cfg; + sai->dl_cfg_cnt = num_cfg + 1; + return 0; +} + static int fsl_sai_runtime_suspend(struct device *dev); static int fsl_sai_runtime_resume(struct device *dev);
@@ -1134,6 +1280,13 @@ static int fsl_sai_probe(struct platform_device *pdev) else sai->mclk_clk[0] = sai->bus_clk;
+ /* read dataline mask for rx and tx*/ + ret = fsl_sai_read_dlcfg(sai); + if (ret < 0) { + dev_err(dev, "failed to read dlcfg %d\n", ret); + return ret; + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h index 4d657edc9c9f..9bb8ced520c8 100644 --- a/sound/soc/fsl/fsl_sai.h +++ b/sound/soc/fsl/fsl_sai.h @@ -218,6 +218,13 @@
#define PMQOS_CPU_LATENCY BIT(0)
+/* Max number of dataline */ +#define FSL_SAI_DL_NUM (8) +/* default dataline type is zero */ +#define FSL_SAI_DL_DEFAULT (0) +#define FSL_SAI_DL_I2S BIT(0) +#define FSL_SAI_DL_PDM BIT(1) + struct fsl_sai_soc_data { bool use_imx_pcm; bool use_edma; @@ -253,6 +260,14 @@ struct fsl_sai_param { u32 dataline; };
+struct fsl_sai_dl_cfg { + unsigned int type; + unsigned int pins[2]; + unsigned int mask[2]; + unsigned int start_off[2]; + unsigned int next_off[2]; +}; + struct fsl_sai { struct platform_device *pdev; struct regmap *regmap; @@ -265,6 +280,8 @@ struct fsl_sai { bool is_dsp_mode; bool is_pdm_mode; bool synchronous[2]; + struct fsl_sai_dl_cfg *dl_cfg; + unsigned int dl_cfg_cnt;
unsigned int mclk_id[2]; unsigned int mclk_streams;