Hi,
Changes since v2: - DT binding: - use proper (?) patch subject for the binding docuemtn patch - drop pll4 and pll15 from DT - driver should check the rate via clk_get_parent. If it is not available (as it is not currently) then use the match_data provided rates. - add simple explanation for the clocking setup - Use descriptive names for clocks: cpb/ivi-mcasp-auxclk and cpb/ivi-codec-scki - dt_binding_check shows no errors/warnings - ASoC machine driver: - Try to read the PLL4/15 rate with clk API (parent of the two clock divider) if it is not available then use the match_data provided numbers. - Support for single PLL setup
Changes since v1: - Fixed DT binding documentation errors - Rebased on ASoC head and updated the driver to compile and work
This series adds support for the analog audio setup on the j721e EVM. The audio setup of the EVM is: Common Processor Board (CPB): McASP10 <-> pcm3168a Infotainment Expansion Board (IVI): McASP0 <-> 2x pcm3168a
Both CPB and IVI wired in parallel serializer setup.
The first patch adds the stream_name for McASP driver as it is needed in multicodec (and would be needed in DPCM) setup for proper DAPM handling.
The second patch adds two DT schema, one for the cpb and one for the cpb+ivi card.
Regards, Peter --- Peter Ujfalusi (3): ASoC: ti: davinci-mcasp: Specify stream_name for playback/capture ASoC: dt-bindings: Add documentation for TI j721e EVM (CPB and IVI) ASoC: ti: Add custom machine driver for j721e EVM (CPB and IVI)
.../bindings/sound/ti,j721e-cpb-audio.yaml | 95 ++ .../sound/ti,j721e-cpb-ivi-audio.yaml | 150 +++ sound/soc/ti/Kconfig | 8 + sound/soc/ti/Makefile | 2 + sound/soc/ti/davinci-mcasp.c | 3 + sound/soc/ti/j721e-evm.c | 887 ++++++++++++++++++ 6 files changed, 1145 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml create mode 100644 Documentation/devicetree/bindings/sound/ti,j721e-cpb-ivi-audio.yaml create mode 100644 sound/soc/ti/j721e-evm.c