This update to the Kconfig files allows the ability to select/deselect entire submenus, starting with the root "Sound device support" on the main kernel configuration page. Inside sound support, ALSA/OSS can be easily enabled/disabled. Inside ALSA, entire classes of devices can be easily enabled/disabled at the ALSA menu (e.g. ISA, PCI, USB devices) without having to manually disable individual cards within the submenus. Modified menus: main, isa, pci, pcmcia, soc, spi, usb
Signed-off-by: Andrew Paprocki andrew@ishiboo.com
diff -r 39df17389b57 -r a60a39d8e6fe Kconfig --- a/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,11 +1,9 @@ # sound/Config.in #
-menu "Sound" +menuconfig SOUND + tristate "Sound device support" depends on HAS_IOMEM - -config SOUND - tristate "Sound card support" help If you have a sound card in your computer, i.e. if it can say more than an occasional beep, say Y. Be sure to have all the information @@ -33,21 +31,22 @@ config SOUND Kernel patches and supporting utilities to do that are in the pcsp package, available at ftp://ftp.infradead.org/pub/pcsp/.
+if SOUND + source "sound/oss/dmasound/Kconfig"
if !M68K
-menu "Advanced Linux Sound Architecture" - depends on SOUND!=n - -config SND - tristate "Advanced Linux Sound Architecture" - depends on SOUND - help +menuconfig SND + tristate "Advanced Linux Sound Architecture" + depends on SOUND!=n + help Say 'Y' or 'M' to enable ALSA (Advanced Linux Sound Architecture), the new base sound system.
For more information, see http://www.alsa-project.org/ + +if SND
source "sound/core/Kconfig"
@@ -63,9 +62,7 @@ source "sound/aoa/Kconfig"
source "sound/arm/Kconfig"
-if SPI source "sound/spi/Kconfig" -endif
source "sound/mips/Kconfig"
@@ -85,22 +82,21 @@ source "sound/parisc/Kconfig"
source "sound/soc/Kconfig"
-endmenu +endif # SND
-menu "Open Sound System" +menuconfig SOUND_PRIME + tristate "Open Sound System (DEPRECATED)" depends on SOUND!=n - -config SOUND_PRIME - tristate "Open Sound System (DEPRECATED)" - depends on SOUND help Say 'Y' or 'M' to enable Open Sound System drivers.
+if SOUND_PRIME + source "sound/oss/Kconfig"
-endmenu +endif # SOUND_PRIME
-endif +endif # !M68K
config AC97_BUS tristate @@ -110,4 +106,4 @@ config AC97_BUS sound although they're sharing the AC97 bus. Concerned drivers should "select" this.
-endmenu +endif # SOUND diff -r 39df17389b57 -r a60a39d8e6fe isa/Kconfig --- a/isa/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/isa/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,4 +1,13 @@ # ALSA ISA drivers + +menuconfig SND_ISA + bool "ISA devices" + depends on SND!=n && ISA && ISA_DMA_API + default y + help + Support for sound devices connected via the ISA bus. + +if SND_ISA
config SND_AD1848_LIB tristate @@ -21,14 +30,10 @@ config SND_SB16_DSP select SND_PCM select SND_SB_COMMON
-menu "ISA devices" - depends on SND!=n && ISA && ISA_DMA_API - config SND_ADLIB tristate "AdLib FM card" - depends on SND - select SND_OPL3_LIB - help + select SND_OPL3_LIB + ---help--- Say Y here to include support for AdLib FM cards.
To compile this driver as a module, choose M here: the module @@ -36,12 +41,12 @@ config SND_ADLIB
config SND_AD1816A tristate "Analog Devices SoundPort AD1816A" - depends on SND && PNP && ISA - select ISAPNP - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- Say Y here to include support for Analog Devices SoundPort AD1816A or compatible sound chips.
@@ -50,9 +55,8 @@ config SND_AD1816A
config SND_AD1848 tristate "Generic AD1848/CS4248 driver" - depends on SND - select SND_AD1848_LIB - help + select SND_AD1848_LIB + ---help--- Say Y here to include support for AD1848 (Analog Devices) or CS4248 (Cirrus Logic - Crystal Semiconductors) chips. @@ -64,12 +68,12 @@ config SND_AD1848
config SND_ALS100 tristate "Avance Logic ALS100/ALS120" - depends on SND && PNP && ISA - select ISAPNP - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_SB16_DSP - help + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + ---help--- Say Y here to include support for soundcards based on Avance Logic ALS100, ALS110, ALS120 and ALS200 chips.
@@ -78,12 +82,12 @@ config SND_ALS100
config SND_AZT2320 tristate "Aztech Systems AZT2320" - depends on SND && PNP && ISA - select ISAPNP - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_CS4231_LIB - help + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_CS4231_LIB + ---help--- Say Y here to include support for soundcards based on the Aztech Systems AZT2320 chip.
@@ -92,10 +96,9 @@ config SND_AZT2320
config SND_CMI8330 tristate "C-Media CMI8330" - depends on SND - select SND_AD1848_LIB - select SND_SB16_DSP - help + select SND_AD1848_LIB + select SND_SB16_DSP + ---help--- Say Y here to include support for soundcards based on the C-Media CMI8330 chip.
@@ -104,10 +107,9 @@ config SND_CMI8330
config SND_CS4231 tristate "Generic Cirrus Logic CS4231 driver" - depends on SND - select SND_MPU401_UART - select SND_CS4231_LIB - help + select SND_MPU401_UART + select SND_CS4231_LIB + ---help--- Say Y here to include support for CS4231 chips from Cirrus Logic - Crystal Semiconductors.
@@ -116,11 +118,10 @@ config SND_CS4231
config SND_CS4232 tristate "Generic Cirrus Logic CS4232 driver" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_CS4231_LIB - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_CS4231_LIB + ---help--- Say Y here to include support for CS4232 chips from Cirrus Logic - Crystal Semiconductors.
@@ -129,11 +130,10 @@ config SND_CS4232
config SND_CS4236 tristate "Generic Cirrus Logic CS4236+ driver" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_CS4231_LIB - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_CS4231_LIB + ---help--- Say Y to include support for CS4235,CS4236,CS4237B,CS4238B, CS4239 chips from Cirrus Logic - Crystal Semiconductors.
@@ -142,12 +142,12 @@ config SND_CS4236
config SND_DT019X tristate "Diamond Technologies DT-019X, Avance Logic ALS-007" - depends on SND && PNP && ISA - select ISAPNP - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_SB16_DSP - help + depends on PNP + select ISAPNP + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + ---help--- Say Y here to include support for soundcards based on the Diamond Technologies DT-019X or Avance Logic ALS-007 chips.
@@ -156,11 +156,11 @@ config SND_DT019X
config SND_ES968 tristate "Generic ESS ES968 driver" - depends on SND && PNP && ISA + depends on PNP select ISAPNP select SND_MPU401_UART select SND_SB8_DSP - help + ---help--- Say Y here to include support for ESS AudioDrive ES968 chips.
To compile this driver as a module, choose M here: the module @@ -168,11 +168,10 @@ config SND_ES968
config SND_ES1688 tristate "Generic ESS ES688/ES1688 driver" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- Say Y here to include support for ESS AudioDrive ES688 or ES1688 chips.
@@ -181,11 +180,10 @@ config SND_ES1688
config SND_ES18XX tristate "Generic ESS ES18xx driver" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- Say Y here to include support for ESS AudioDrive ES18xx chips.
To compile this driver as a module, choose M here: the module @@ -193,11 +191,11 @@ config SND_ES18XX
config SND_SC6000 tristate "Gallant SC-6000, Audio Excel DSP 16" - depends on SND && HAS_IOPORT - select SND_AD1848_LIB - select SND_OPL3_LIB - select SND_MPU401_UART - help + depends on HAS_IOPORT + select SND_AD1848_LIB + select SND_OPL3_LIB + select SND_MPU401_UART + ---help--- Say Y here to include support for Gallant SC-6000 card and clones: Audio Excel DSP 16 and Zoltrix AV302.
@@ -209,11 +207,10 @@ config SND_GUS_SYNTH
config SND_GUSCLASSIC tristate "Gravis UltraSound Classic" - depends on SND - select SND_RAWMIDI - select SND_PCM - select SND_GUS_SYNTH - help + select SND_RAWMIDI + select SND_PCM + select SND_GUS_SYNTH + ---help--- Say Y here to include support for Gravis UltraSound Classic soundcards.
@@ -222,12 +219,11 @@ config SND_GUSCLASSIC
config SND_GUSEXTREME tristate "Gravis UltraSound Extreme" - depends on SND select SND_HWDEP select SND_MPU401_UART select SND_PCM select SND_GUS_SYNTH - help + ---help--- Say Y here to include support for Gravis UltraSound Extreme soundcards.
@@ -236,11 +232,10 @@ config SND_GUSEXTREME
config SND_GUSMAX tristate "Gravis UltraSound MAX" - depends on SND - select SND_RAWMIDI - select SND_CS4231_LIB - select SND_GUS_SYNTH - help + select SND_RAWMIDI + select SND_CS4231_LIB + select SND_GUS_SYNTH + ---help--- Say Y here to include support for Gravis UltraSound MAX soundcards.
@@ -249,11 +244,11 @@ config SND_GUSMAX
config SND_INTERWAVE tristate "AMD InterWave, Gravis UltraSound PnP" - depends on SND && PNP && ISA - select SND_RAWMIDI - select SND_CS4231_LIB - select SND_GUS_SYNTH - help + depends on PNP + select SND_RAWMIDI + select SND_CS4231_LIB + select SND_GUS_SYNTH + ---help--- Say Y here to include support for AMD InterWave based soundcards (Gravis UltraSound Plug & Play, STB SoundRage32, MED3210, Dynasonic Pro, Panasonic PCA761AW). @@ -263,11 +258,11 @@ config SND_INTERWAVE
config SND_INTERWAVE_STB tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)" - depends on SND && PNP && ISA - select SND_RAWMIDI - select SND_CS4231_LIB - select SND_GUS_SYNTH - help + depends on PNP + select SND_RAWMIDI + select SND_CS4231_LIB + select SND_GUS_SYNTH + ---help--- Say Y here to include support for AMD InterWave based soundcards with a TEA6330T bass and treble regulator (UltraSound 32-Pro). @@ -277,11 +272,10 @@ config SND_INTERWAVE_STB
config SND_OPL3SA2 tristate "Yamaha OPL3-SA2/SA3" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_CS4231_LIB - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_CS4231_LIB + ---help--- Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3 chips.
@@ -290,12 +284,11 @@ config SND_OPL3SA2
config SND_OPTI92X_AD1848 tristate "OPTi 82C92x - AD1848" - depends on SND select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART select SND_AD1848_LIB - help + ---help--- Say Y here to include support for soundcards based on Opti 82C92x or OTI-601 chips and using an AD1848 codec.
@@ -304,12 +297,11 @@ config SND_OPTI92X_AD1848
config SND_OPTI92X_CS4231 tristate "OPTi 82C92x - CS4231" - depends on SND select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART select SND_CS4231_LIB - help + ---help--- Say Y here to include support for soundcards based on Opti 82C92x chips and using a CS4231 codec.
@@ -318,11 +310,10 @@ config SND_OPTI92X_CS4231
config SND_OPTI93X tristate "OPTi 82C93x" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- Say Y here to include support for soundcards based on Opti 82C93x chips.
@@ -331,12 +322,11 @@ config SND_OPTI93X
config SND_MIRO tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver" - depends on SND select SND_OPL4_LIB select SND_CS4231_LIB select SND_MPU401_UART select SND_PCM - help + ---help--- Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards.
@@ -345,11 +335,10 @@ config SND_MIRO
config SND_SB8 tristate "Sound Blaster 1.0/2.0/Pro (8-bit)" - depends on SND select SND_OPL3_LIB select SND_RAWMIDI select SND_SB8_DSP - help + ---help--- Say Y here to include support for Creative Sound Blaster 1.0/ 2.0/Pro (8-bit) or 100% compatible soundcards.
@@ -358,11 +347,10 @@ config SND_SB8
config SND_SB16 tristate "Sound Blaster 16 (PnP)" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_SB16_DSP - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + ---help--- Say Y here to include support for Sound Blaster 16 soundcards (including the Plug and Play version).
@@ -371,11 +359,10 @@ config SND_SB16
config SND_SBAWE tristate "Sound Blaster AWE (32,64) (PnP)" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_SB16_DSP - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_SB16_DSP + ---help--- Say Y here to include support for Sound Blaster AWE soundcards (including the Plug and Play version).
@@ -386,7 +373,7 @@ config SND_SB16_CSP bool "Sound Blaster 16/AWE CSP support" depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC) select FW_LOADER if !SND_SB16_CSP_FIRMWARE_IN_KERNEL - help + ---help--- Say Y here to include support for the CSP core. This special coprocessor can do variable tasks like various compression and decompression algorithms. @@ -395,16 +382,15 @@ config SND_SB16_CSP_FIRMWARE_IN_KERNEL bool "In-kernel firmware for SB16 CSP" depends on SND_SB16_CSP default y - help + ---help--- Say Y here to include the static firmware built in the kernel for the SB16 CSP controller. If you choose N here, you need to install the firmware files from the alsa-firmware package.
config SND_SGALAXY tristate "Aztech Sound Galaxy" - depends on SND - select SND_AD1848_LIB - help + select SND_AD1848_LIB + ---help--- Say Y here to include support for Aztech Sound Galaxy soundcards.
@@ -413,11 +399,10 @@ config SND_SGALAXY
config SND_SSCAPE tristate "Ensoniq SoundScape PnP driver" - depends on SND select SND_HWDEP select SND_MPU401_UART select SND_CS4231_LIB - help + ---help--- Say Y here to include support for Ensoniq SoundScape PnP soundcards.
@@ -426,12 +411,11 @@ config SND_SSCAPE
config SND_WAVEFRONT tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" - depends on SND select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART select SND_CS4231_LIB - help + ---help--- Say Y here to include support for Turtle Beach Maui, Tropez and Tropez+ soundcards based on the Wavefront chip.
@@ -442,10 +426,10 @@ config SND_WAVEFRONT_FIRMWARE_IN_KERNEL bool "In-kernel firmware for Wavefront" depends on SND_WAVEFRONT default y - help + ---help--- Say Y here to include the static firmware for FX DSP built in the kernel for the Wavefront driver. If you choose N here, you need to install the firmware files from the alsa-firmware package.
-endmenu +endif # SND_ISA diff -r 39df17389b57 -r a60a39d8e6fe pci/Kconfig --- a/pci/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/pci/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,13 +1,18 @@ # ALSA PCI drivers
-menu "PCI devices" - depends on SND!=n && PCI +menuconfig SND_PCI + bool "PCI devices" + depends on SND!=n && PCI + default y + help + Support for sound devices connected via the PCI bus. + +if SND_PCI
config SND_AD1889 tristate "Analog Devices AD1889" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated AC97 sound device found in particular on the Hewlett-Packard [BCJ]-xxx0 class PA-RISC workstations, using the AD1819 codec. @@ -17,11 +22,10 @@ config SND_AD1889
config SND_ALS300 tristate "Avance Logic ALS300/ALS300+" - depends on SND - select SND_PCM - select SND_AC97_CODEC - select SND_OPL3_LIB - help + select SND_PCM + select SND_AC97_CODEC + select SND_OPL3_LIB + ---help--- Say 'Y' or 'M' to include support for Avance Logic ALS300/ALS300+
To compile this driver as a module, choose M here: the module @@ -29,12 +33,12 @@ config SND_ALS300
config SND_ALS4000 tristate "Avance Logic ALS4000" - depends on SND && ISA_DMA_API + depends on ISA_DMA_API select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM select SND_SB_COMMON - help + ---help--- Say Y here to include support for soundcards based on Avance Logic ALS4000 chips.
@@ -43,10 +47,9 @@ config SND_ALS4000
config SND_ALI5451 tristate "ALi M5451 PCI Audio Controller" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated AC97 sound device on motherboards using the ALi M5451 Audio Controller (M1535/M1535D/M1535+/M1535D+ south bridges). Newer chipsets @@ -57,9 +60,8 @@ config SND_ALI5451
config SND_ATIIXP tristate "ATI IXP AC97 Controller" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated AC97 sound device on motherboards with ATI chipsets (ATI IXP 150/200/250/ 300/400). @@ -69,9 +71,8 @@ config SND_ATIIXP
config SND_ATIIXP_MODEM tristate "ATI IXP Modem" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated MC97 modem on motherboards with ATI chipsets (ATI IXP 150/200/250).
@@ -80,10 +81,9 @@ config SND_ATIIXP_MODEM
config SND_AU8810 tristate "Aureal Advantage" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for Aureal Advantage soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output. @@ -95,10 +95,9 @@ config SND_AU8810
config SND_AU8820 tristate "Aureal Vortex" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for Aureal Vortex soundcards.
Supported features: Hardware Mixer and SRC. For more info, email @@ -109,10 +108,9 @@ config SND_AU8820
config SND_AU8830 tristate "Aureal Vortex 2" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for Aureal Vortex 2 soundcards.
Supported features: Hardware Mixer, SRC, EQ and SPDIF output. @@ -124,8 +122,7 @@ config SND_AU8830
config SND_AW2 tristate "Emagic Audiowerk 2" - depends on SND - help + ---help--- Say Y here to include support for Emagic Audiowerk 2 soundcards.
Supported features: Analog and SPDIF output. Analog or SPDIF input. @@ -139,11 +136,11 @@ config SND_AW2
config SND_AZT3328 tristate "Aztech AZF3328 / PCI168 (EXPERIMENTAL)" - depends on SND && EXPERIMENTAL - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + depends on EXPERIMENTAL + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- Say Y here to include support for Aztech AZF3328 (PCI168) soundcards.
@@ -152,9 +149,8 @@ config SND_AZT3328
config SND_BT87X tristate "Bt87x Audio Capture" - depends on SND - select SND_PCM - help + select SND_PCM + ---help--- If you want to record audio from TV cards based on Brooktree Bt878/Bt879 chips, say Y here and read file:Documentation/sound/alsa/Bt87x.txt. @@ -165,7 +161,7 @@ config SND_BT87X_OVERCLOCK config SND_BT87X_OVERCLOCK bool "Bt87x Audio overclocking" depends on SND_BT87X - help + ---help--- Say Y here if 448000 Hz isn't enough for you and you want to record from the analog input with up to 1792000 Hz.
@@ -174,11 +170,10 @@ config SND_BT87X_OVERCLOCK
config SND_CA0106 tristate "SB Audigy LS / Live 24bit" - depends on SND select SND_AC97_CODEC select SND_RAWMIDI select SND_VMASTER - help + ---help--- Say Y here to include support for the Sound Blaster Audigy LS and Live 24bit.
@@ -187,11 +182,10 @@ config SND_CA0106
config SND_CMIPCI tristate "C-Media 8338, 8738, 8768, 8770" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_PCM - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_PCM + ---help--- If you want to use soundcards based on C-Media CMI8338, CMI8738, CMI8768 or CMI8770 chips, say Y here and read file:Documentation/sound/alsa/CMIPCI.txt. @@ -201,15 +195,13 @@ config SND_CMIPCI
config SND_OXYGEN_LIB tristate - depends on SND select SND_PCM select SND_MPU401_UART
config SND_OXYGEN tristate "C-Media 8788 (Oxygen)" - depends on SND select SND_OXYGEN_LIB - help + ---help--- Say Y here to include support for sound cards based on the C-Media CMI8788 (Oxygen HD Audio) chip: * Asound A-8788 @@ -225,11 +217,10 @@ config SND_OXYGEN
config SND_CS4281 tristate "Cirrus Logic (Sound Fusion) CS4281" - depends on SND - select SND_OPL3_LIB - select SND_RAWMIDI - select SND_AC97_CODEC - help + select SND_OPL3_LIB + select SND_RAWMIDI + select SND_AC97_CODEC + ---help--- Say Y here to include support for Cirrus Logic CS4281 chips.
To compile this driver as a module, choose M here: the module @@ -237,10 +228,9 @@ config SND_CS4281
config SND_CS46XX tristate "Cirrus Logic (Sound Fusion) CS4280/CS461x/CS462x/CS463x" - depends on SND - select SND_RAWMIDI - select SND_AC97_CODEC - help + select SND_RAWMIDI + select SND_AC97_CODEC + ---help--- Say Y here to include support for Cirrus Logic CS4610/CS4612/ CS4614/CS4615/CS4622/CS4624/CS4630/CS4280 chips.
@@ -251,16 +241,16 @@ config SND_CS46XX_NEW_DSP bool "Cirrus Logic (Sound Fusion) New DSP support" depends on SND_CS46XX default y - help + ---help--- Say Y here to use a new DSP image for SPDIF and dual codecs.
This works better than the old code, so say Y.
config SND_CS5530 tristate "CS5530 Audio" - depends on SND && ISA_DMA_API + depends on ISA_DMA_API select SND_SB16_DSP - help + ---help--- Say Y here to include support for audio on Cyrix/NatSemi CS5530 chips.
To compile this driver as a module, choose M here: the module @@ -268,10 +258,10 @@ config SND_CS5530
config SND_CS5535AUDIO tristate "CS5535/CS5536 Audio" - depends on SND && X86 && !X86_64 - select SND_PCM - select SND_AC97_CODEC - help + depends on X86 && !X86_64 + select SND_PCM + select SND_AC97_CODEC + ---help--- Say Y here to include support for audio on CS5535 chips. It is referred to as NS CS5535 IO or AMD CS5535 IO companion in various literature. This driver also supports the CS5536 audio @@ -286,10 +276,9 @@ config SND_CS5535AUDIO
config SND_DARLA20 tristate "(Echoaudio) Darla20" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Darla.
To compile this driver as a module, choose M here: the module @@ -297,10 +286,9 @@ config SND_DARLA20
config SND_GINA20 tristate "(Echoaudio) Gina20" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Gina.
To compile this driver as a module, choose M here: the module @@ -308,11 +296,10 @@ config SND_GINA20
config SND_LAYLA20 tristate "(Echoaudio) Layla20" - depends on SND - select FW_LOADER - select SND_RAWMIDI - select SND_PCM - help + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Layla.
To compile this driver as a module, choose M here: the module @@ -320,10 +307,9 @@ config SND_LAYLA20
config SND_DARLA24 tristate "(Echoaudio) Darla24" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Darla24.
To compile this driver as a module, choose M here: the module @@ -331,10 +317,9 @@ config SND_DARLA24
config SND_GINA24 tristate "(Echoaudio) Gina24" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Gina24.
To compile this driver as a module, choose M here: the module @@ -342,11 +327,10 @@ config SND_GINA24
config SND_LAYLA24 tristate "(Echoaudio) Layla24" - depends on SND - select FW_LOADER - select SND_RAWMIDI - select SND_PCM - help + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Layla24.
To compile this driver as a module, choose M here: the module @@ -354,11 +338,10 @@ config SND_LAYLA24
config SND_MONA tristate "(Echoaudio) Mona" - depends on SND - select FW_LOADER - select SND_RAWMIDI - select SND_PCM - help + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Mona.
To compile this driver as a module, choose M here: the module @@ -366,11 +349,10 @@ config SND_MONA
config SND_MIA tristate "(Echoaudio) Mia" - depends on SND - select FW_LOADER - select SND_RAWMIDI - select SND_PCM - help + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Mia and Mia-midi.
To compile this driver as a module, choose M here: the module @@ -378,11 +360,10 @@ config SND_MIA
config SND_ECHO3G tristate "(Echoaudio) 3G cards" - depends on SND - select FW_LOADER - select SND_RAWMIDI - select SND_PCM - help + select FW_LOADER + select SND_RAWMIDI + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Gina3G and Layla3G.
To compile this driver as a module, choose M here: the module @@ -390,10 +371,9 @@ config SND_ECHO3G
config SND_INDIGO tristate "(Echoaudio) Indigo" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Indigo.
To compile this driver as a module, choose M here: the module @@ -401,10 +381,9 @@ config SND_INDIGO
config SND_INDIGOIO tristate "(Echoaudio) Indigo IO" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Indigo IO.
To compile this driver as a module, choose M here: the module @@ -412,10 +391,9 @@ config SND_INDIGOIO
config SND_INDIGODJ tristate "(Echoaudio) Indigo DJ" - depends on SND - select FW_LOADER - select SND_PCM - help + select FW_LOADER + select SND_PCM + ---help--- Say 'Y' or 'M' to include support for Echoaudio Indigo DJ.
To compile this driver as a module, choose M here: the module @@ -423,12 +401,11 @@ config SND_INDIGODJ
config SND_EMU10K1 tristate "Emu10k1 (SB Live!, Audigy, E-mu APS)" - depends on SND select FW_LOADER select SND_HWDEP select SND_RAWMIDI select SND_AC97_CODEC - help + ---help--- Say Y to include support for Sound Blaster PCI 512, Live!, Audigy and E-mu APS (partially supported) soundcards.
@@ -441,10 +418,9 @@ config SND_EMU10K1
config SND_EMU10K1X tristate "Emu10k1X (Dell OEM Version)" - depends on SND - select SND_AC97_CODEC - select SND_RAWMIDI - help + select SND_AC97_CODEC + select SND_RAWMIDI + ---help--- Say Y here to include support for the Dell OEM version of the Sound Blaster Live!.
@@ -453,10 +429,9 @@ config SND_EMU10K1X
config SND_ENS1370 tristate "(Creative) Ensoniq AudioPCI 1370" - depends on SND - select SND_RAWMIDI - select SND_PCM - help + select SND_RAWMIDI + select SND_PCM + ---help--- Say Y here to include support for Ensoniq AudioPCI ES1370 chips.
To compile this driver as a module, choose M here: the module @@ -464,10 +439,9 @@ config SND_ENS1370
config SND_ENS1371 tristate "(Creative) Ensoniq AudioPCI 1371/1373" - depends on SND - select SND_RAWMIDI - select SND_AC97_CODEC - help + select SND_RAWMIDI + select SND_AC97_CODEC + ---help--- Say Y here to include support for Ensoniq AudioPCI ES1371 chips and Sound Blaster PCI 64 or 128 soundcards.
@@ -476,11 +450,10 @@ config SND_ENS1371
config SND_ES1938 tristate "ESS ES1938/1946/1969 (Solo-1)" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on ESS Solo-1 (ES1938, ES1946, ES1969) chips.
@@ -489,10 +462,9 @@ config SND_ES1938
config SND_ES1968 tristate "ESS ES1968/1978 (Maestro-1/2/2E)" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on ESS Maestro 1/2/2E chips.
@@ -501,11 +473,10 @@ config SND_ES1968
config SND_FM801 tristate "ForteMedia FM801" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on the ForteMedia FM801 chip.
@@ -515,7 +486,7 @@ config SND_FM801_TEA575X_BOOL config SND_FM801_TEA575X_BOOL bool "ForteMedia FM801 + TEA5757 tuner" depends on SND_FM801 - help + ---help--- Say Y here to include support for soundcards based on the ForteMedia FM801 chip with a TEA5757 tuner connected to GPIO1-3 pins (Media Forte SF256-PCS-02) into the snd-fm801 driver. @@ -531,10 +502,9 @@ config SND_FM801_TEA575X
config SND_HDA_INTEL tristate "Intel HD Audio" - depends on SND select SND_PCM select SND_VMASTER - help + ---help--- Say Y here to include support for Intel "High Definition Audio" (Azalia) motherboard devices.
@@ -545,7 +515,7 @@ config SND_HDA_HWDEP bool "Build hwdep interface for HD-audio driver" depends on SND_HDA_INTEL select SND_HWDEP - help + ---help--- Say Y here to build a hwdep interface for HD-audio driver. This interface can be used for out-of-band communication with codecs for debugging purposes. @@ -554,7 +524,7 @@ config SND_HDA_CODEC_REALTEK bool "Build Realtek HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include Realtek HD-audio codec support in snd-hda-intel driver, such as ALC880.
@@ -562,7 +532,7 @@ config SND_HDA_CODEC_ANALOG bool "Build Analog Device HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include Analog Device HD-audio codec support in snd-hda-intel driver, such as AD1986A.
@@ -570,7 +540,7 @@ config SND_HDA_CODEC_SIGMATEL bool "Build IDT/Sigmatel HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include IDT (Sigmatel) HD-audio codec support in snd-hda-intel driver, such as STAC9200.
@@ -578,7 +548,7 @@ config SND_HDA_CODEC_VIA bool "Build VIA HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include VIA HD-audio codec support in snd-hda-intel driver, such as VT1708.
@@ -586,7 +556,7 @@ config SND_HDA_CODEC_ATIHDMI bool "Build ATI HDMI HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include ATI HDMI HD-audio codec support in snd-hda-intel driver, such as ATI RS600 HDMI.
@@ -594,7 +564,7 @@ config SND_HDA_CODEC_CONEXANT bool "Build Conexant HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include Conexant HD-audio codec support in snd-hda-intel driver, such as CX20549.
@@ -602,7 +572,7 @@ config SND_HDA_CODEC_CMEDIA bool "Build C-Media HD-audio codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include C-Media HD-audio codec support in snd-hda-intel driver, such as CMI9880.
@@ -610,7 +580,7 @@ config SND_HDA_CODEC_SI3054 bool "Build Silicon Labs 3054 HD-modem codec support" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to include Silicon Labs 3054 HD-modem codec (and compatibles) support in snd-hda-intel driver.
@@ -618,14 +588,14 @@ config SND_HDA_GENERIC bool "Enable generic HD-audio codec parser" depends on SND_HDA_INTEL default y - help + ---help--- Say Y here to enable the generic HD-audio codec parser in snd-hda-intel driver.
config SND_HDA_POWER_SAVE bool "Aggressive power-saving on HD-audio" depends on SND_HDA_INTEL && EXPERIMENTAL - help + ---help--- Say Y here to enable more aggressive power-saving mode on HD-audio driver. The power-saving timeout can be configured via power_save option or over sysfs on-the-fly. @@ -634,17 +604,16 @@ config SND_HDA_POWER_SAVE_DEFAULT int "Default time-out for HD-audio power-save mode" depends on SND_HDA_POWER_SAVE default 0 - help + ---help--- The default time-out value in seconds for HD-audio automatic power-save mode. 0 means to disable the power-save mode.
config SND_HDSP tristate "RME Hammerfall DSP Audio" - depends on SND select SND_HWDEP select SND_RAWMIDI select SND_PCM - help + ---help--- Say Y here to include support for RME Hammerfall DSP Audio soundcards.
@@ -653,11 +622,10 @@ config SND_HDSP
config SND_HDSPM tristate "RME Hammerfall DSP MADI" - depends on SND select SND_HWDEP select SND_RAWMIDI select SND_PCM - help + ---help--- Say Y here to include support for RME Hammerfall DSP MADI soundcards.
@@ -666,9 +634,8 @@ config SND_HDSPM
config SND_HIFIER tristate "TempoTec HiFier Fantasia" - depends on SND select SND_OXYGEN_LIB - help + ---help--- Say Y here to include support for the MediaTek/TempoTec HiFier Fantasia sound card.
@@ -677,10 +644,9 @@ config SND_HIFIER
config SND_ICE1712 tristate "ICEnsemble ICE1712 (Envy24)" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on the ICE1712 (Envy24) chip.
@@ -694,10 +660,9 @@ config SND_ICE1712
config SND_ICE1724 tristate "ICE/VT1724/1720 (Envy24HT/PT)" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on ICE/VT1724/1720 (Envy24HT/PT) chips.
@@ -711,9 +676,8 @@ config SND_ICE1724
config SND_INTEL8X0 tristate "Intel/SiS/nVidia/AMD/ALi AC97 Controller" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated AC97 sound device on motherboards with Intel/SiS/nVidia/AMD chipsets, or ALi chipsets using the M5455 Audio Controller. (There is a @@ -724,9 +688,8 @@ config SND_INTEL8X0
config SND_INTEL8X0M tristate "Intel/SiS/nVidia/AMD MC97 Modem" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated MC97 modem on motherboards with Intel/SiS/nVidia/AMD chipsets.
@@ -735,10 +698,9 @@ config SND_INTEL8X0M
config SND_KORG1212 tristate "Korg 1212 IO" - depends on SND select FW_LOADER if !SND_KORG1212_FIRMWARE_IN_KERNEL select SND_PCM - help + ---help--- Say Y here to include support for Korg 1212IO soundcards.
To compile this driver as a module, choose M here: the module @@ -748,17 +710,16 @@ config SND_KORG1212_FIRMWARE_IN_KERNEL bool "In-kernel firmware for Korg1212 driver" depends on SND_KORG1212 default y - help + ---help--- Say Y here to include the static firmware built in the kernel for the Korg1212 driver. If you choose N here, you need to install the firmware files from the alsa-firmware package.
config SND_MAESTRO3 tristate "ESS Allegro/Maestro3" - depends on SND select FW_LOADER if !SND_MAESTRO3_FIRMWARE_IN_KERNEL select SND_AC97_CODEC - help + ---help--- Say Y here to include support for soundcards based on ESS Maestro 3 (Allegro) chips.
@@ -769,17 +730,16 @@ config SND_MAESTRO3_FIRMWARE_IN_KERNEL bool "In-kernel firmware for Maestro3 driver" depends on SND_MAESTRO3 default y - help + ---help--- Say Y here to include the static firmware built in the kernel for the Maestro3 driver. If you choose N here, you need to install the firmware files from the alsa-firmware package.
config SND_MIXART tristate "Digigram miXart" - depends on SND select SND_HWDEP select SND_PCM - help + ---help--- If you want to use Digigram miXart soundcards, say Y here and read file:Documentation/sound/alsa/MIXART.txt.
@@ -788,9 +748,8 @@ config SND_MIXART
config SND_NM256 tristate "NeoMagic NM256AV/ZX" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for NeoMagic NM256AV/ZX chips.
To compile this driver as a module, choose M here: the module @@ -798,10 +757,9 @@ config SND_NM256
config SND_PCXHR tristate "Digigram PCXHR" - depends on SND select SND_PCM select SND_HWDEP - help + ---help--- Say Y here to include support for Digigram PCXHR boards.
To compile this driver as a module, choose M here: the module @@ -809,12 +767,11 @@ config SND_PCXHR
config SND_RIPTIDE tristate "Conexant Riptide" - depends on SND - select FW_LOADER - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_AC97_CODEC - help + select FW_LOADER + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say 'Y' or 'M' to include support for Conexant Riptide chip.
To compile this driver as a module, choose M here: the module @@ -822,9 +779,8 @@ config SND_RIPTIDE
config SND_RME32 tristate "RME Digi32, 32/8, 32 PRO" - depends on SND - select SND_PCM - help + select SND_PCM + ---help--- Say Y to include support for RME Digi32, Digi32 PRO and Digi32/8 (Sek'd Prodif32, Prodif96 and Prodif Gold) audio devices. @@ -834,9 +790,8 @@ config SND_RME32
config SND_RME96 tristate "RME Digi96, 96/8, 96/8 PRO" - depends on SND - select SND_PCM - help + select SND_PCM + ---help--- Say Y here to include support for RME Digi96, Digi96/8 and Digi96/8 PRO/PAD/PST soundcards.
@@ -845,9 +800,8 @@ config SND_RME96
config SND_RME9652 tristate "RME Digi9652 (Hammerfall)" - depends on SND - select SND_PCM - help + select SND_PCM + ---help--- Say Y here to include support for RME Hammerfall (RME Digi9652/Digi9636) soundcards.
@@ -856,9 +810,9 @@ config SND_RME9652
config SND_SIS7019 tristate "SiS 7019 Audio Accelerator" - depends on SND && X86 && !X86_64 - select SND_AC97_CODEC - help + depends on X86 && !X86_64 + select SND_AC97_CODEC + ---help--- Say Y here to include support for the SiS 7019 Audio Accelerator.
To compile this driver as a module, choose M here: the module @@ -866,11 +820,10 @@ config SND_SIS7019
config SND_SONICVIBES tristate "S3 SonicVibes" - depends on SND - select SND_OPL3_LIB - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_OPL3_LIB + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on the S3 SonicVibes chip.
@@ -879,10 +832,9 @@ config SND_SONICVIBES
config SND_TRIDENT tristate "Trident 4D-Wave DX/NX; SiS 7018" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for soundcards based on Trident 4D-Wave DX/NX or SiS 7018 chips.
@@ -891,10 +843,9 @@ config SND_TRIDENT
config SND_VIA82XX tristate "VIA 82C686A/B, 8233/8235 AC97 Controller" - depends on SND - select SND_MPU401_UART - select SND_AC97_CODEC - help + select SND_MPU401_UART + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated AC97 sound device on motherboards with VIA chipsets.
@@ -903,9 +854,8 @@ config SND_VIA82XX
config SND_VIA82XX_MODEM tristate "VIA 82C686A/B, 8233 based Modems" - depends on SND - select SND_AC97_CODEC - help + select SND_AC97_CODEC + ---help--- Say Y here to include support for the integrated MC97 modem on motherboards with VIA chipsets.
@@ -914,9 +864,8 @@ config SND_VIA82XX_MODEM
config SND_VIRTUOSO tristate "Asus Virtuoso 200 (Xonar)" - depends on SND select SND_OXYGEN_LIB - help + ---help--- Say Y here to include support for sound cards based on the Asus AV200 chip, i.e., Xonar D2 and Xonar D2X.
@@ -925,9 +874,8 @@ config SND_VIRTUOSO
config SND_VX222 tristate "Digigram VX222" - depends on SND select SND_VX_LIB - help + ---help--- Say Y here to include support for Digigram VX222 soundcards.
To compile this driver as a module, choose M here: the module @@ -935,12 +883,11 @@ config SND_VX222
config SND_YMFPCI tristate "Yamaha YMF724/740/744/754" - depends on SND select FW_LOADER if !SND_YMFPCI_FIRMWARE_IN_KERNEL select SND_OPL3_LIB select SND_MPU401_UART select SND_AC97_CODEC - help + ---help--- Say Y here to include support for Yamaha PCI audio chips - YMF724, YMF724F, YMF740, YMF740C, YMF744, YMF754.
@@ -951,7 +898,7 @@ config SND_YMFPCI_FIRMWARE_IN_KERNEL bool "In-kernel firmware for YMFPCI driver" depends on SND_YMFPCI default y - help + ---help--- Say Y here to include the static firmware built in the kernel for the YMFPCI driver. If you choose N here, you need to install the firmware files from the alsa-firmware package. @@ -960,7 +907,7 @@ config SND_AC97_POWER_SAVE bool "AC97 Power-Saving Mode" depends on SND_AC97_CODEC && EXPERIMENTAL default n - help + ---help--- Say Y here to enable the aggressive power-saving support of AC97 codecs. In this mode, the power-mode is dynamically controlled at each open/close. @@ -973,8 +920,8 @@ config SND_AC97_POWER_SAVE_DEFAULT int "Default time-out for AC97 power-save mode" depends on SND_AC97_POWER_SAVE default 0 - help + ---help--- The default time-out value in seconds for AC97 automatic power-save mode. 0 means to disable the power-save mode.
-endmenu +endif # SND_PCI diff -r 39df17389b57 -r a60a39d8e6fe pcmcia/Kconfig --- a/pcmcia/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/pcmcia/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,11 +1,16 @@ # ALSA PCMCIA drivers
-menu "PCMCIA devices" +menuconfig SND_PCMCIA + bool "PCMCIA devices" depends on SND!=n && PCMCIA + default y + help + Support for sound devices connected via a PCMCIA interface. + +if SND_PCMCIA
config SND_VXPOCKET tristate "Digigram VXpocket" - depends on SND && PCMCIA select SND_VX_LIB help Say Y here to include support for Digigram VXpocket and @@ -16,7 +21,6 @@ config SND_VXPOCKET
config SND_PDAUDIOCF tristate "Sound Core PDAudioCF" - depends on SND && PCMCIA select SND_PCM help Say Y here to include support for Sound Core PDAudioCF @@ -25,4 +29,4 @@ config SND_PDAUDIOCF To compile this driver as a module, choose M here: the module will be called snd-pdaudiocf.
-endmenu +endif # SND_PCMCIA diff -r 39df17389b57 -r a60a39d8e6fe soc/Kconfig --- a/soc/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/soc/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,27 +1,24 @@ -# -# SoC audio configuration -# +# ALSA SoC audio configuration
-menu "System on Chip audio support" - depends on SND!=n +menuconfig SND_SOC + tristate "SoC (System on Chip) devices" + depends on SND!=n + select SND_PCM + help + If you want ASoC support, you should say Y here and also to the + specific driver for your SoC platform below. + + ASoC provides power efficient ALSA support for embedded battery + powered SoC based systems like PDAs, phones and personal media + players. + + This ASoC audio support can also be built as a module. If so, the + module will be called snd-soc-core. + +if SND_SOC
config SND_SOC_AC97_BUS bool - -config SND_SOC - tristate "ALSA for SoC audio support" - depends on SND - select SND_PCM - ---help--- - - If you want ASoC support, you should say Y here and also to the - specific driver for your SoC platform below. - - ASoC provides power efficient ALSA support for embedded battery powered - SoC based systems like PDA's, Phones and Personal Media Players. - - This ASoC audio support can also be built as a module. If so, the module - will be called snd-soc-core.
# All the supported Soc's source "sound/soc/at91/Kconfig" @@ -34,4 +31,4 @@ source "sound/soc/davinci/Kconfig" # Supported codecs source "sound/soc/codecs/Kconfig"
-endmenu +endif # SND_SOC diff -r 39df17389b57 -r a60a39d8e6fe spi/Kconfig --- a/spi/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/spi/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,13 +1,19 @@ -#SPI drivers +# ALSA SPI drivers
-menu "SPI devices" - depends on SND != n +menuconfig SND_SPI + bool "SPI devices" + depends on SND!=n && SPI + default y + help + Support for sound devices connected via the SPI bus. + +if SND_SPI
config SND_AT73C213 tristate "Atmel AT73C213 DAC driver" depends on ATMEL_SSC select SND_PCM - help + ---help--- Say Y here if you want to use the Atmel AT73C213 external DAC. This DAC can be found on Atmel development boards.
@@ -22,10 +28,10 @@ config SND_AT73C213_TARGET_BITRATE depends on SND_AT73C213 default "48000" range 8000 50000 - help + ---help--- Sets the target bitrate for the bitrate calculator in the driver. Limited by hardware to be between 8000 Hz and 50000 Hz.
Set to 48000 Hz by default.
-endmenu +endif # SND_SPI diff -r 39df17389b57 -r a60a39d8e6fe usb/Kconfig --- a/usb/Kconfig Fri Feb 22 17:57:02 2008 +0100 +++ b/usb/Kconfig Sat Feb 23 01:04:07 2008 -0500 @@ -1,15 +1,20 @@ # ALSA USB drivers
-menu "USB devices" - depends on SND!=n && USB!=n +menuconfig SND_USB + bool "USB devices" + depends on SND!=n && USB!=n + default y + help + Support for sound devices connected via the USB bus. + +if SND_USB
config SND_USB_AUDIO tristate "USB Audio/MIDI driver" - depends on SND && USB select SND_HWDEP select SND_RAWMIDI select SND_PCM - help + ---help--- Say Y here to include support for USB audio and USB MIDI devices.
@@ -18,11 +23,11 @@ config SND_USB_AUDIO
config SND_USB_USX2Y tristate "Tascam US-122, US-224 and US-428 USB driver" - depends on SND && USB && (X86 || PPC || ALPHA) + depends on (X86 || PPC || ALPHA) select SND_HWDEP select SND_RAWMIDI select SND_PCM - help + ---help--- Say Y here to include support for Tascam USB Audio/MIDI interfaces or controllers US-122, US-224 and US-428.
@@ -31,11 +36,10 @@ config SND_USB_USX2Y
config SND_USB_CAIAQ tristate "Native Instruments USB audio devices" - depends on SND && USB select SND_HWDEP select SND_RAWMIDI select SND_PCM - help + ---help--- Say Y here to include support for caiaq USB audio interfaces, namely:
@@ -50,10 +54,10 @@ config SND_USB_CAIAQ will be called snd-usb-caiaq.
config SND_USB_CAIAQ_INPUT - bool "enable input device for controllers" + bool "Enable input device for controllers" depends on SND_USB_CAIAQ depends on INPUT=y || INPUT=SND_USB_CAIAQ - help + ---help--- Say Y here to support input controllers like buttons, knobs, alpha dials and analog pedals on the following products:
@@ -63,5 +67,4 @@ config SND_USB_CAIAQ_INPUT * Native Instruments Kore Controller 2 * Native Instruments Audio Kontrol 1
-endmenu - +endif # SND_USB