On Fri, 03 May 2019 06:05:09 +0200, Hui Wang wrote:
On 2019/5/2 下午11:49, Takashi Iwai wrote:
On Thu, 02 May 2019 04:52:46 +0200, Hui Wang wrote:
On 2019/4/30 下午5:02, Takashi Iwai wrote:
On Tue, 30 Apr 2019 10:42:55 +0200, Hui Wang wrote:
On 2019/4/30 下午3:35, Takashi Iwai wrote:
On Tue, 30 Apr 2019 08:57:11 +0200, Hui Wang wrote: > On the machines with AMD GPU or Nvidia GPU, we often meet this issues: > after s3, there are 4 HDMI/DP audio devices in the gnome-sound-setting > even there is no any monitors plugged. > > When this problem happens, we check the /proc/asound/cardX/eld#N.M, we > will find the monitor_present=1, eld_valid=0. >
> > So the fix is putting your change and my change together like below?
Well, removing "!repoll" should be treated as a separate patch, and I'm not sure whether we want to get rid of it.
The "!repoll" check is a bit misleading. This condition indicates that the jack status sync is required, e.g. it's the case where polling goes to timeout or at the beginning of the probe. For example, in the case of resume, it starts with repoll=1. If an incomplete state (monitor=1, eld_valid=0) is seen at this point, the code schedules for the retry at a later point. And if it reaches to the max count, it clears to repoll=0 and try the last attempt, which won't schedule any longer.
So, at this point, we *have to* notify the result no matter whether it's satisfying or not.
thanks,
Takashi
So let us do sth in the hda_jack.c, adding two members check_eld and eld_valid in the struct hda_jack_tbl{},
When building new jacks, since there is no eld_data yet, just follow old rules (only checking AC_PINSENSE_PRESENCE)
After building new jacks, if it is not a phantom one, set check_eld to 1
every time we get eld (via verbs or acomp), we will sync jack->eld_valid to eld->eld_valid.
in the report_sync(), we will check check_eld and eld_valid, not depends on AC_PINSENSE_PRESENCE only.
No matter interrupt, s3 or poll, the jack->eld_valid will be synced and the report_sync() will report jack state depeneds on both AC_PINSENSE_PRESENCE and eld_valid
Does it sound good?
OK, I was confused -- I overlooked the fact that hda_jack.c updates the pin sense locally. And thanks for the suggestion, we're heading to the right direction.
One thing that doesn't fit is introducing HDMI-specific things like eld_valid and check_eld. Basically this is about the falsely reported jack detection, after all. So, what we need is the correction of the incorrect jack detection -- or a way to override the value.
Actually, for HDMI, there is no reason to read the pin sense at all. All we need is already provided by the HDMI codec driver (monitor present and eld valid).
Then I can think of adding a new flag hda_jack_tbl.manual_pin_sense, for example, indicating that the pin sense is updated by the driver. That's a change something like below.
thanks,
Takashi
--- a/sound/pci/hda/hda_jack.c +++ b/sound/pci/hda/hda_jack.c @@ -189,7 +189,7 @@ void snd_hda_jack_set_dirty_all(struct hda_codec *codec) int i;
for (i = 0; i < codec->jacktbl.used; i++, jack++) - if (jack->nid) + if (jack->nid && !jack->manual_pin_sense) jack->jack_dirty = 1; } EXPORT_SYMBOL_GPL(snd_hda_jack_set_dirty_all); @@ -568,7 +568,8 @@ void snd_hda_jack_unsol_event(struct hda_codec *codec, unsigned int res) event = snd_hda_jack_tbl_get_from_tag(codec, tag); if (!event) return; - event->jack_dirty = 1; + if (!event->manual_pin_sense) + event->jack_dirty = 1;
call_jack_callback(codec, res, event); snd_hda_jack_report_sync(codec); --- a/sound/pci/hda/hda_jack.h +++ b/sound/pci/hda/hda_jack.h @@ -40,6 +40,7 @@ struct hda_jack_tbl { unsigned int jack_dirty:1; /* needs to update? */ unsigned int phantom_jack:1; /* a fixed, always present port? */ unsigned int block_report:1; /* in a transitional state - do not report to userspace */ + unsigned int manual_pin_sense:1; /* pin_sense is updated by codec driver */ hda_nid_t gating_jack; /* valid when gating jack plugged */ hda_nid_t gated_jack; /* gated is dependent on this jack */ int type; --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -170,6 +170,7 @@ struct hdmi_spec {
bool dyn_pin_out; bool dyn_pcm_assign; + bool use_pin_sense; /* * Non-generic VIA/NVIDIA specific */ @@ -797,7 +798,6 @@ static void hdmi_intrinsic_event(struct hda_codec *codec, unsigned int res) jack = snd_hda_jack_tbl_get_from_tag(codec, tag); if (!jack) return; - jack->jack_dirty = 1;
codec_dbg(codec, "HDMI hot plug event: Codec=%d Pin=%d Device=%d Inactive=%d Presence_Detect=%d ELD_Valid=%d\n", @@ -1551,8 +1551,11 @@ static bool hdmi_present_sense_via_verbs(struct hdmi_spec_per_pin *per_pin, ret = !repoll || !eld->monitor_present || eld->eld_valid;
jack = snd_hda_jack_tbl_get(codec, pin_nid); - if (jack) + if (jack) { jack->block_report = !ret; + jack->pin_sense = (eld->monitor_present && eld->eld_valid) ? + AC_PINSENSE_PRESENCE : 0; + }
mutex_unlock(&per_pin->lock); return ret; @@ -2163,6 +2166,7 @@ static int generic_hdmi_build_jack(struct hda_codec *codec, int pcm_idx) * align with dyn_pcm_assign mode */ spec->pcm_rec[pcm_idx].jack = jack->jack; + jack->manual_pin_sense = !spec->use_pin_sense; return 0; }
@@ -2972,6 +2976,7 @@ static int patch_simple_hdmi(struct hda_codec *codec, spec->multiout.dig_out_nid = cvt_nid; spec->num_cvts = 1; spec->num_pins = 1; + spec->use_pin_sense = true; per_pin = snd_array_new(&spec->pins); per_cvt = snd_array_new(&spec->cvts); if (!per_pin || !per_cvt) {