Actually, this dual usage headphone jack is quite common among laptops that have digital out. By default, though, Alsa should probably turn off spdif for power savings. I'm (slowly) working on a mechanism that can trigger a popup application when a device is inserted to a jack with sense enabled. The idea is to be able to popup an app so users can toggle between analog headphones or spdif on systems like yours, or between 2nd headphone/microphone on other systems that support HP Amp on multiple ports.
Tobin
On Fri, 2008-05-09 at 17:22 +0200, Björn van der Meer wrote:
At Fri, 9 May 2008 15:35:50 +0200,
Björn van der Meer wrote:
At Mon, 5 May 2008 08:43:16 +0200,
Björn van der Meer wrote:
Hello Everyone,
I have above component in my laptop and lack the expertise to add it to to patch_realtek.c myself.
I think I have collected all the relevant information if one of the developers wants to give it a try.
My Notebook: Medion 98300 (a.k.a. WAM2030) (Please note: Medion is not an OEM. The board is nVidia based, OEM thought to be Wistron. Apparently rarely used sound component?)
Internal speakers Internal mic - unknown three jacks: headphone, mic, SPDIF(dual use jack). Jack Sensing under Windows. 5.1 surround (sounds like the setup should be supported by 3stack-6ch-dig)
lspci: 00:10.1 Audio device [0403]: nVidia Corporation MCP51 High Definition Audio [10de:026c] (rev a2) Subsystem: Wistron Corp. Unknown device [17c0:4079] Flags: 66MHz, fast devsel, IRQ 20 Memory at c0000000 (32-bit, non-prefetchable) [size=16K] Capabilities: [44] Power Management version 2 Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Capabilities: [6c] HyperTransport: MSI Mapping
hwinfo: 22: PCI 10.1: 0403 Audio device [Created at pci.296] UDI: /org/freedesktop/Hal/devices/pci_10de_26c Unique ID: wRyD.X7XJ3rTjrR3 SysFS ID: /devices/pci0000:00/0000:00:10.1 SysFS BusID: 0000:00:10.1 Hardware Class: sound Model: "Wistron MCP51 High Definition Audio" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x026c "MCP51 High Definition Audio" SubVendor: pci 0x17c0 "Wistron Corp." SubDevice: pci 0x4079 Revision: 0xa2 Driver: "HDA Intel" Driver Modules: "snd_hda_intel" Memory Range: 0xc0000000-0xc0003fff (rw,non-prefetchable) IRQ: 20 (195693 events) Module Alias: "pci:v000010DEd0000026Csv000017C0sd00004079bc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown
alsa-info.sh output is at http://pastebin.com/f49962c92.
Currently the only thing working is output via the internal speakers.
And doesn't this still work with the latest ALSA HG driver?
Takashi
Thanks for your answer. Latest HG does not compile on my system, throws memalloc.c errors. (Could be me doing something wrong though - out on a limp)
CC [M] /home/bvdm/alsa-driver/acore/memalloc.o /home/bvdm/alsa-driver/acore/memalloc.c: In function ‘snd_mem_init’: /home/bvdm/alsa-driver/acore/memalloc.c:729: error: implicit declaration of function ‘proc_create’ /home/bvdm/alsa-driver/acore/memalloc.c:730: warning: assignment makes pointer from integer without a cast make[3]: *** [/home/bvdm/alsa-driver/acore/memalloc.o] Error 1 make[2]: *** [/home/bvdm/alsa-driver/acore] Error 2 make[1]: *** [_module_/home/bvdm/alsa-driver] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-16-generic'
I see references to similar errors on the list, had to do with processor identification?
Configure detects this: checking for processor type... i586 checking for i386 machine type... default
/proc/cpuinfo starts with: [...] vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-50 [...]
It's a problem in alsa-driver build stub. I fixed it right now on HG tree.
I have also just lifted patch_realtek.c from the current hg and compiled it in a working tarball (actually labelled alsa-driver-hg20080502.tar from the realtek site), which compiles, looks a bit better. Gives me:
- Different set of mixer controls (not 5.1 though)
OK, I'll need a newer alsa-info.sh with the latest driver.
New alsa-info.sh is at http://pastebin.ca/1012744
- headphone output in the strange dual-use SPDIF jack only (headphone
jack only goes 2/3 of the way in)
Please elaborate? I don't understand your description.
hehe, yes. I didn't believe it either. This laptop has three jacks.
- light blue, symbol "headphone", normal 3.5mm jack
- pink, symbol "microphone", normal 3.5mm jack
- black, symbol line out, normal 3.5mm (that only goes in 2/3 of the way)
jack AND SPDIF (yes, now glowing red)
Actually. Seeing is believing. www.chronovault.net/static/medion98300jacks.jpg
- but with jack-sensing working in that jack, with the boxes turning off
when I insert the headphone into the SPDIF.
This sounds good -- do you mean that you have another headphone jacks?
Takashi
Thank you very much
Just hg'ed again compile runs fine.
This is without any "options snd-hda-intel model=XXXX" line in /etc/modprobe.d/alsa-base
- I now put my headphone into the black jack and get sound, boxes turn off.
- light blue jack is without function now.
- mixer option "headphone" is without function.
- mixer now has master,
headphone,pcm,front,frontmic,line,mic,micboost,digital
- only master,pcm and front work, all regulate master volume on
SPDIF-used-as-headphone-jack and the internal boxes
- dont have a mic right here to try out
Should I try options there now? Is /etc/init.d/alsasound stop / start a good way to cycle through options?