On Fri, Apr 17, 2015 at 05:32:59PM +0900, Inha Song wrote:
This patch add device tree bindings for the pdata needed to configure the Accessory Detect Mode select when Headphone detection.
Signed-off-by: Inha Song ideal.song@samsung.com
Documentation/devicetree/bindings/mfd/arizona.txt | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 7bd1273..e7cb939 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -49,6 +49,10 @@ Optional properties: input singals. If values less than the number of input signals, elements that has not been specifed are set to 0 by default.
- wlf,hpdet-channel : Headphone detection channel, this filed to be used the
- ACCDET_MODE bits in the ACCESSORY_DETECT_MODE_1 register. The valid values
- are 0 for HPDETL and 1 for HPDETR.
Lets remove the references to the register bits this tends to add some confusion to the binding doc review and update to mention the defines I suggested adding in the other patch.
Thanks, Charles
- DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
-- 2.0.0.390.gcb682f8