Hi Tim,
Some more review comments:
On 11/09/2017 07:45 PM, Tim Harvey wrote:
Add support for the TDA1997x HDMI receivers.
Cc: Hans Verkuil hverkuil@xs4all.nl Signed-off-by: Tim Harvey tharvey@gateworks.com
v3:
- use V4L2_DV_BT_FRAME_WIDTH/HEIGHT macros
- fixed missing break
- use only hdmi_infoframe_log for infoframe logging
- simplify tda1997x_s_stream error handling
- add delayed work proc to handle hotplug enable/disable
- fix set_edid (disable HPD before writing, enable after)
- remove enabling edid by default
- initialize timings
- take quant range into account in colorspace conversion
- remove vendor/product tracking (we provide this in log_status via infoframes)
- add v4l_controls
- add more detail to log_status
- calculate vhref generator timings
- timing detection fixes (rounding errors, hswidth errors)
- rename configure_input/configure_conv functions
v2:
- implement dv timings enum/cap
- remove deprecated g_mbus_config op
- fix dv_query_timings
- add EDID get/set handling
- remove max-pixel-rate support
- add audio codec DAI support
- change audio bindings
drivers/media/i2c/Kconfig | 9 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/tda1997x.c | 3485 ++++++++++++++++++++++++++++++++++ include/dt-bindings/media/tda1997x.h | 78 + include/media/i2c/tda1997x.h | 53 + 5 files changed, 3626 insertions(+) create mode 100644 drivers/media/i2c/tda1997x.c create mode 100644 include/dt-bindings/media/tda1997x.h create mode 100644 include/media/i2c/tda1997x.h
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 9415389..c2b0400 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -56,6 +56,15 @@ config VIDEO_TDA9840 To compile this driver as a module, choose M here: the module will be called tda9840.
+config VIDEO_TDA1997X
- tristate "NXP TDA1997x HDMI receiver"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- ---help---
V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.To compile this driver as a module, choose M here: themodule will be called tda1997x.config VIDEO_TEA6415C tristate "Philips TEA6415C audio processor" depends on I2C diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index c843c18..58f2b2e 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o obj-$(CONFIG_VIDEO_TDA9840) += tda9840.o +obj-$(CONFIG_VIDEO_TDA1997X) += tda1997x.o obj-$(CONFIG_VIDEO_TEA6415C) += tea6415c.o obj-$(CONFIG_VIDEO_TEA6420) += tea6420.o obj-$(CONFIG_VIDEO_SAA7110) += saa7110.o diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c new file mode 100644 index 0000000..662c3a7 --- /dev/null +++ b/drivers/media/i2c/tda1997x.c @@ -0,0 +1,3485 @@ +/*
- Copyright (C) 2017 Gateworks Corporation
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- */
+#include <linux/delay.h> +#include <linux/hdmi.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of_graph.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/types.h> +#include <linux/v4l2-dv-timings.h> +#include <linux/videodev2.h>
+#include <media/v4l2-ctrls.h> +#include <media/v4l2-device.h> +#include <media/v4l2-dv-timings.h> +#include <media/v4l2-event.h> +#include <media/v4l2-fwnode.h> +#include <media/i2c/tda1997x.h>
+#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h>
+#include <dt-bindings/media/tda1997x.h>
+/* debug level */ +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "debug level (0-2)");
+/* Page 0x00 - General Control */ +#define REG_VERSION 0x0000 +#define REG_INPUT_SEL 0x0001 +#define REG_SVC_MODE 0x0002 +#define REG_HPD_MAN_CTRL 0x0003 +#define REG_RT_MAN_CTRL 0x0004 +#define REG_STANDBY_SOFT_RST 0x000A +#define REG_HDMI_SOFT_RST 0x000B +#define REG_HDMI_INFO_RST 0x000C +#define REG_INT_FLG_CLR_TOP 0x000E +#define REG_INT_FLG_CLR_SUS 0x000F +#define REG_INT_FLG_CLR_DDC 0x0010 +#define REG_INT_FLG_CLR_RATE 0x0011 +#define REG_INT_FLG_CLR_MODE 0x0012 +#define REG_INT_FLG_CLR_INFO 0x0013 +#define REG_INT_FLG_CLR_AUDIO 0x0014 +#define REG_INT_FLG_CLR_HDCP 0x0015 +#define REG_INT_FLG_CLR_AFE 0x0016 +#define REG_INT_MASK_TOP 0x0017 +#define REG_INT_MASK_SUS 0x0018 +#define REG_INT_MASK_DDC 0x0019 +#define REG_INT_MASK_RATE 0x001A +#define REG_INT_MASK_MODE 0x001B +#define REG_INT_MASK_INFO 0x001C +#define REG_INT_MASK_AUDIO 0x001D +#define REG_INT_MASK_HDCP 0x001E +#define REG_INT_MASK_AFE 0x001F +#define REG_DETECT_5V 0x0020 +#define REG_SUS_STATUS 0x0021 +#define REG_V_PER 0x0022 +#define REG_H_PER 0x0025 +#define REG_HS_WIDTH 0x0027 +#define REG_FMT_H_TOT 0x0029 +#define REG_FMT_H_ACT 0x002b +#define REG_FMT_H_FRONT 0x002d +#define REG_FMT_H_SYNC 0x002f +#define REG_FMT_H_BACK 0x0031 +#define REG_FMT_V_TOT 0x0033 +#define REG_FMT_V_ACT 0x0035 +#define REG_FMT_V_FRONT_F1 0x0037 +#define REG_FMT_V_FRONT_F2 0x0038 +#define REG_FMT_V_SYNC 0x0039 +#define REG_FMT_V_BACK_F1 0x003a +#define REG_FMT_V_BACK_F2 0x003b +#define REG_FMT_DE_ACT 0x003c +#define REG_RATE_CTRL 0x0040 +#define REG_CLK_MIN_RATE 0x0043 +#define REG_CLK_MAX_RATE 0x0046 +#define REG_CLK_A_STATUS 0x0049 +#define REG_CLK_A_RATE 0x004A +#define REG_DRIFT_CLK_A_REG 0x004D +#define REG_CLK_B_STATUS 0x004E +#define REG_CLK_B_RATE 0x004F +#define REG_DRIFT_CLK_B_REG 0x0052 +#define REG_HDCP_CTRL 0x0060 +#define REG_HDCP_KDS 0x0061 +#define REG_HDCP_BCAPS 0x0063 +#define REG_HDCP_KEY_CTRL 0x0064 +#define REG_INFO_CTRL 0x0076 +#define REG_INFO_EXCEED 0x0077 +#define REG_PIX_REPEAT 0x007B +#define REG_AUDIO_PATH 0x007C +#define REG_AUDCFG 0x007D +#define REG_AUDIO_OUT_ENABLE 0x007E +#define REG_AUDIO_OUT_HIZ 0x007F +#define REG_VDP_CTRL 0x0080 +#define REG_VDP_MATRIX 0x0081 +#define REG_VHREF_CTRL 0x00A0 +#define REG_PXCNT_PR 0x00A2 +#define REG_PXCNT_NPIX 0x00A4 +#define REG_LCNT_PR 0x00A6 +#define REG_LCNT_NLIN 0x00A8 +#define REG_HREF_S 0x00AA +#define REG_HREF_E 0x00AC +#define REG_HS_S 0x00AE +#define REG_HS_E 0x00B0 +#define REG_VREF_F1_S 0x00B2 +#define REG_VREF_F1_WIDTH 0x00B4 +#define REG_VREF_F2_S 0x00B5 +#define REG_VREF_F2_WIDTH 0x00B7 +#define REG_VS_F1_LINE_S 0x00B8 +#define REG_VS_F1_LINE_WIDTH 0x00BA +#define REG_VS_F2_LINE_S 0x00BB +#define REG_VS_F2_LINE_WIDTH 0x00BD +#define REG_VS_F1_PIX_S 0x00BE +#define REG_VS_F1_PIX_E 0x00C0 +#define REG_VS_F2_PIX_S 0x00C2 +#define REG_VS_F2_PIX_E 0x00C4 +#define REG_FREF_F1_S 0x00C6 +#define REG_FREF_F2_S 0x00C8 +#define REG_FDW_S 0x00ca +#define REG_FDW_E 0x00cc +#define REG_BLK_GY 0x00da +#define REG_BLK_BU 0x00dc +#define REG_BLK_RV 0x00de +#define REG_FILTERS_CTRL 0x00e0 +#define REG_DITHERING_CTRL 0x00E9 +#define REG_OF 0x00EA +#define REG_PCLK 0x00EB +#define REG_HS_HREF 0x00EC +#define REG_VS_VREF 0x00ED +#define REG_DE_FREF 0x00EE +#define REG_VP35_32_CTRL 0x00EF +#define REG_VP31_28_CTRL 0x00F0 +#define REG_VP27_24_CTRL 0x00F1 +#define REG_VP23_20_CTRL 0x00F2 +#define REG_VP19_16_CTRL 0x00F3 +#define REG_VP15_12_CTRL 0x00F4 +#define REG_VP11_08_CTRL 0x00F5 +#define REG_VP07_04_CTRL 0x00F6 +#define REG_VP03_00_CTRL 0x00F7 +#define REG_CURPAGE_00H 0xFF
+#define MASK_VPER 0x3fffff +#define MASK_VHREF 0x3fff +#define MASK_HPER 0x0fff +#define MASK_HSWIDTH 0x03ff
+/* HPD Detection */ +#define DETECT_UTIL BIT(7) /* utility of HDMI level */ +#define DETECT_HPD BIT(6) /* HPD of HDMI level */ +#define DETECT_5V_SEL BIT(2) /* 5V present on selected input */ +#define DETECT_5V_B BIT(1) /* 5V present on input B */ +#define DETECT_5V_A BIT(0) /* 5V present on input A */
+/* Input Select */ +#define INPUT_SEL_RST_FMT BIT(7) /* 1=reset format measurement */ +#define INPUT_SEL_RST_VDP BIT(2) /* 1=reset video data path */ +#define INPUT_SEL_OUT_MODE BIT(1) /* 0=loop 1=bypass */ +#define INPUT_SEL_B BIT(0) /* 0=inputA 1=inputB */
+/* Service Mode */ +#define SVC_MODE_CLK2_MASK 0xc0 +#define SVC_MODE_CLK2_SHIFT 6 +#define SVC_MODE_CLK2_XTL 0L +#define SVC_MODE_CLK2_XTLDIV2 1L +#define SVC_MODE_CLK2_HDMIX2 3L +#define SVC_MODE_CLK1_MASK 0x30 +#define SVC_MODE_CLK1_SHIFT 4 +#define SVC_MODE_CLK1_XTAL 0L +#define SVC_MODE_CLK1_XTLDIV2 1L +#define SVC_MODE_CLK1_HDMI 3L +#define SVC_MODE_RAMP BIT(3) /* 0=colorbar 1=ramp */ +#define SVC_MODE_PAL BIT(2) /* 0=NTSC(480i/p) 1=PAL(576i/p) */ +#define SVC_MODE_INT_PROG BIT(1) /* 0=interlaced 1=progressive */ +#define SVC_MODE_SM_ON BIT(0) /* Enable color bars and tone gen */
+/* HDP Manual Control */ +#define HPD_MAN_CTRL_HPD_PULSE BIT(7) /* HPD Pulse low 110ms */ +#define HPD_MAN_CTRL_5VEN BIT(2) /* Output 5V */ +#define HPD_MAN_CTRL_HPD_B BIT(1) /* Assert HPD High for Input A */ +#define HPD_MAN_CTRL_HPD_A BIT(0) /* Assert HPD High for Input A */
+/* RT_MAN_CTRL */ +#define RT_MAN_CTRL_RT_AUTO BIT(7) +#define RT_MAN_CTRL_RT BIT(6) +#define RT_MAN_CTRL_RT_B BIT(1) /* enable TMDS pull-up on Input B */ +#define RT_MAN_CTRL_RT_A BIT(0) /* enable TMDS pull-up on Input A */
+/* VDP_CTRL */ +#define VDP_CTRL_COMPDEL_BP BIT(5) /* bypass compdel */ +#define VDP_CTRL_FORMATTER_BP BIT(4) /* bypass formatter */ +#define VDP_CTRL_PREFILTER_BP BIT(1) /* bypass prefilter */ +#define VDP_CTRL_MATRIX_BP BIT(0) /* bypass matrix conversion */
+/* REG_VHREF_CTRL */ +#define VHREF_INT_DET BIT(7) /* interlace detect: 1=alt 0=frame */ +#define VHREF_VSYNC_MASK 0x60 +#define VHREF_VSYNC_SHIFT 6 +#define VHREF_VSYNC_AUTO 0L +#define VHREF_VSYNC_FDW 1L +#define VHREF_VSYNC_EVEN 2L +#define VHREF_VSYNC_ODD 3L +#define VHREF_STD_DET_MASK 0x18 +#define VHREF_STD_DET_SHIFT 3 +#define VHREF_STD_DET_PAL 0L +#define VHREF_STD_DET_NTSC 1L +#define VHREF_STD_DET_AUTO 2L +#define VHREF_STD_DET_OFF 3L +#define VHREF_VREF_SRC_STD BIT(2) /* 1=from standard 0=manual */ +#define VHREF_HREF_SRC_STD BIT(1) /* 1=from standard 0=manual */ +#define VHREF_HSYNC_SEL_HS BIT(0) /* 1=HS 0=VS */
+/* AUDIO_OUT_ENABLE */ +#define AUDIO_OUT_ENABLE_ACLK BIT(5) +#define AUDIO_OUT_ENABLE_WS BIT(4) +#define AUDIO_OUT_ENABLE_AP3 BIT(3) +#define AUDIO_OUT_ENABLE_AP2 BIT(2) +#define AUDIO_OUT_ENABLE_AP1 BIT(1) +#define AUDIO_OUT_ENABLE_AP0 BIT(0)
+/* Prefilter Control */ +#define FILTERS_CTRL_BU_MASK 0x0c +#define FILTERS_CTRL_BU_SHIFT 2 +#define FILTERS_CTRL_RV_MASK 0x03 +#define FILTERS_CTRL_RV_SHIFT 0 +#define FILTERS_CTRL_OFF 0L /* off */ +#define FILTERS_CTRL_2TAP 1L /* 2 Taps */ +#define FILTERS_CTRL_7TAP 2L /* 7 Taps */ +#define FILTERS_CTRL_2_7TAP 3L /* 2/7 Taps */
+/* PCLK Configuration */ +#define PCLK_DELAY_MASK 0x70 +#define PCLK_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */ +#define PCLK_INV_SHIFT 2 +#define PCLK_SEL_MASK 0x03 /* clock scaler */ +#define PCLK_SEL_SHIFT 0 +#define PCLK_SEL_X1 0L +#define PCLK_SEL_X2 1L +#define PCLK_SEL_DIV2 2L +#define PCLK_SEL_DIV4 3L
+/* Pixel Repeater */ +#define PIX_REPEAT_MASK_UP_SEL 0x30 +#define PIX_REPEAT_MASK_REP 0x0f +#define PIX_REPEAT_SHIFT 4 +#define PIX_REPEAT_CHROMA 1
+/* Page 0x01 - HDMI info and packets */ +#define REG_HDMI_FLAGS 0x0100 +#define REG_DEEP_COLOR_MODE 0x0101 +#define REG_AUDIO_FLAGS 0x0108 +#define REG_AUDIO_FREQ 0x0109 +#define REG_ACP_PACKET_TYPE 0x0141 +#define REG_ISRC1_PACKET_TYPE 0x0161 +#define REG_ISRC2_PACKET_TYPE 0x0181 +#define REG_GBD_PACKET_TYPE 0x01a1
+/* HDMI_FLAGS */ +#define HDMI_FLAGS_AUDIO BIT(7) /* Audio packet in last videoframe */ +#define HDMI_FLAGS_HDMI BIT(6) /* HDMI detected */ +#define HDMI_FLAGS_EESS BIT(5) /* EESS detected */ +#define HDMI_FLAGS_HDCP BIT(4) /* HDCP detected */ +#define HDMI_FLAGS_AVMUTE BIT(3) /* AVMUTE */ +#define HDMI_FLAGS_AUD_LAYOUT BIT(2) /* Layout status Audio sample packet */ +#define HDMI_FLAGS_AUD_FIFO_OF BIT(1) /* FIFO read/write pointers crossed */ +#define HDMI_FLAGS_AUD_FIFO_LOW BIT(0) /* FIFO read ptr within 2 of write */
+/* Page 0x12 - HDMI Extra control and debug */ +#define REG_CLK_CFG 0x1200 +#define REG_CLK_OUT_CFG 0x1201 +#define REG_CFG1 0x1202 +#define REG_CFG2 0x1203 +#define REG_WDL_CFG 0x1210 +#define REG_DELOCK_DELAY 0x1212 +#define REG_PON_OVR_EN 0x12A0 +#define REG_PON_CBIAS 0x12A1 +#define REG_PON_RESCAL 0x12A2 +#define REG_PON_RES 0x12A3 +#define REG_PON_CLK 0x12A4 +#define REG_PON_PLL 0x12A5 +#define REG_PON_EQ 0x12A6 +#define REG_PON_DES 0x12A7 +#define REG_PON_OUT 0x12A8 +#define REG_PON_MUX 0x12A9 +#define REG_MODE_REC_CFG1 0x12F8 +#define REG_MODE_REC_CFG2 0x12F9 +#define REG_MODE_REC_STS 0x12FA +#define REG_AUDIO_LAYOUT 0x12D0
+#define PON_EN 1 +#define PON_DIS 0
+/* CLK CFG */ +#define CLK_CFG_INV_OUT_CLK BIT(7) +#define CLK_CFG_INV_BUS_CLK BIT(6) +#define CLK_CFG_SEL_ACLK_EN BIT(1) +#define CLK_CFG_SEL_ACLK BIT(0) +#define CLK_CFG_DIS 0
+/* Page 0x13 - HDMI Extra control and debug */ +#define REG_DEEP_COLOR_CTRL 0x1300 +#define REG_CGU_DBG_SEL 0x1305 +#define REG_HDCP_DDC_ADDR 0x1310 +#define REG_HDCP_KIDX 0x1316 +#define REG_DEEP_PLL7_BYP 0x1347 +#define REG_HDCP_DE_CTRL 0x1370 +#define REG_HDCP_EP_FILT_CTRL 0x1371 +#define REG_HDMI_CTRL 0x1377 +#define REG_HMTP_CTRL 0x137a +#define REG_TIMER_D 0x13CF +#define REG_SUS_SET_RGB0 0x13E1 +#define REG_SUS_SET_RGB1 0x13E2 +#define REG_SUS_SET_RGB2 0x13E3 +#define REG_SUS_SET_RGB3 0x13E4 +#define REG_SUS_SET_RGB4 0x13E5 +#define REG_MAN_SUS_HDMI_SEL 0x13E8 +#define REG_MAN_HDMI_SET 0x13E9 +#define REG_SUS_CLOCK_GOOD 0x13EF
+/* HDCP DE Control */ +#define HDCP_DE_MODE_MASK 0xc0 /* DE Measurement mode */ +#define HDCP_DE_MODE_SHIFT 6 +#define HDCP_DE_REGEN_EN BIT(5) /* enable regen mode */ +#define HDCP_DE_FILTER_MASK 0x18 /* DE filter sensitivity */ +#define HDCP_DE_FILTER_SHIFT 3 +#define HDCP_DE_COMP_MASK 0x07 /* DE Composition mode */ +#define HDCP_DE_COMP_MIXED 6L +#define HDCP_DE_COMP_OR 5L +#define HDCP_DE_COMP_AND 4L +#define HDCP_DE_COMP_CH3 3L +#define HDCP_DE_COMP_CH2 2L +#define HDCP_DE_COMP_CH1 1L +#define HDCP_DE_COMP_CH0 0L
+/* HDCP EP Filter Control */ +#define HDCP_EP_FIL_CTL_MASK 0x30 +#define HDCP_EP_FIL_CTL_SHIFT 4 +#define HDCP_EP_FIL_VS_MASK 0x0c +#define HDCP_EP_FIL_VS_SHIFT 2 +#define HDCP_EP_FIL_HS_MASK 0x03 +#define HDCP_EP_FIL_HS_SHIFT 0
+/* HDMI_CTRL */ +#define HDMI_CTRL_MUTE_MASK 0x0c +#define HDMI_CTRL_MUTE_SHIFT 2 +#define HDMI_CTRL_MUTE_AUTO 0L +#define HDMI_CTRL_MUTE_OFF 1L +#define HDMI_CTRL_MUTE_ON 2L +#define HDMI_CTRL_HDCP_MASK 0x03 +#define HDMI_CTRL_HDCP_SHIFT 0 +#define HDMI_CTRL_HDCP_EESS 2L +#define HDMI_CTRL_HDCP_OESS 1L +#define HDMI_CTRL_HDCP_AUTO 0L
+/* CGU_DBG_SEL bits */ +#define CGU_DBG_CLK_SEL_MASK 0x18 +#define CGU_DBG_CLK_SEL_SHIFT 3 +#define CGU_DBG_XO_FRO_SEL BIT(2) +#define CGU_DBG_VDP_CLK_SEL BIT(1) +#define CGU_DBG_PIX_CLK_SEL BIT(0)
+/* REG_MAN_SUS_HDMI_SEL / REG_MAN_HDMI_SET bits */ +#define MAN_DIS_OUT_BUF BIT(7) +#define MAN_DIS_ANA_PATH BIT(6) +#define MAN_DIS_HDCP BIT(5) +#define MAN_DIS_TMDS_ENC BIT(4) +#define MAN_DIS_TMDS_FLOW BIT(3) +#define MAN_RST_HDCP BIT(2) +#define MAN_RST_TMDS_ENC BIT(1) +#define MAN_RST_TMDS_FLOW BIT(0)
+/* Page 0x14 - Audio Extra control and debug */ +#define REG_FIFO_LATENCY_VAL 0x1403 +#define REG_AUDIO_CLOCK 0x1411 +#define REG_TEST_NCTS_CTRL 0x1415 +#define REG_TEST_AUDIO_FREQ 0x1426 +#define REG_TEST_MODE 0x1437
+/* Audio Clock Configuration */ +#define AUDIO_CLOCK_PLL_PD BIT(7) /* powerdown PLL */ +#define AUDIO_CLOCK_SEL_MASK 0x7f +#define AUDIO_CLOCK_SEL_16FS 0L /* 16*fs */ +#define AUDIO_CLOCK_SEL_32FS 1L /* 32*fs */ +#define AUDIO_CLOCK_SEL_64FS 2L /* 64*fs */ +#define AUDIO_CLOCK_SEL_128FS 3L /* 128*fs */ +#define AUDIO_CLOCK_SEL_256FS 4L /* 256*fs */ +#define AUDIO_CLOCK_SEL_512FS 5L /* 512*fs */
+/* Page 0x20: EDID and Hotplug Detect */ +#define REG_EDID_IN_BYTE0 0x2000 /* EDID base */ +#define REG_EDID_IN_VERSION 0x2080 +#define REG_EDID_ENABLE 0x2081 +#define REG_HPD_POWER 0x2084 +#define REG_HPD_AUTO_CTRL 0x2085 +#define REG_HPD_DURATION 0x2086 +#define REG_RX_HPD_HEAC 0x2087
+/* EDID_ENABLE */ +#define EDID_ENABLE_NACK_OFF BIT(7) +#define EDID_ENABLE_EDID_ONLY BIT(6) +#define EDID_ENABLE_B_EN BIT(1) +#define EDID_ENABLE_A_EN BIT(0)
+/* HPD Power */ +#define HPD_POWER_BP_MASK 0x0c +#define HPD_POWER_BP_SHIFT 2 +#define HPD_POWER_BP_LOW 0L +#define HPD_POWER_BP_HIGH 1L +#define HPD_POWER_EDID_ONLY BIT(1)
+/* HPD Auto control */ +#define HPD_AUTO_READ_EDID BIT(7) +#define HPD_AUTO_HPD_F3TECH BIT(5) +#define HPD_AUTO_HP_OTHER BIT(4) +#define HPD_AUTO_HPD_UNSEL BIT(3) +#define HPD_AUTO_HPD_ALL_CH BIT(2) +#define HPD_AUTO_HPD_PRV_CH BIT(1) +#define HPD_AUTO_HPD_NEW_CH BIT(0)
+/* Page 0x21 - EDID content */ +#define REG_EDID_IN_BYTE128 0x2100 /* CEA Extension block */ +#define REG_EDID_IN_SPA_SUB 0x2180 +#define REG_EDID_IN_SPA_AB_A 0x2181 +#define REG_EDID_IN_SPA_CD_A 0x2182 +#define REG_EDID_IN_CKSUM_A 0x2183 +#define REG_EDID_IN_SPA_AB_B 0x2184 +#define REG_EDID_IN_SPA_CD_B 0x2185 +#define REG_EDID_IN_CKSUM_B 0x2186
+/* Page 0x30 - NV Configuration */ +#define REG_RT_AUTO_CTRL 0x3000 +#define REG_EQ_MAN_CTRL0 0x3001 +#define REG_EQ_MAN_CTRL1 0x3002 +#define REG_OUTPUT_CFG 0x3003 +#define REG_MUTE_CTRL 0x3004 +#define REG_SLAVE_ADDR 0x3005 +#define REG_CMTP_REG6 0x3006 +#define REG_CMTP_REG7 0x3007 +#define REG_CMTP_REG8 0x3008 +#define REG_CMTP_REG9 0x3009 +#define REG_CMTP_REGA 0x300A +#define REG_CMTP_REGB 0x300B +#define REG_CMTP_REGC 0x300C +#define REG_CMTP_REGD 0x300D +#define REG_CMTP_REGE 0x300E +#define REG_CMTP_REGF 0x300F +#define REG_CMTP_REG10 0x3010 +#define REG_CMTP_REG11 0x3011
+/* Page 0x80 - CEC */ +#define REG_PWR_CONTROL 0x80F4 +#define REG_OSC_DIVIDER 0x80F5 +#define REG_EN_OSC_PERIOD_LSB 0x80F8 +#define REG_CONTROL 0x80FF
+/* global interrupt flags (INT_FLG_CRL_TOP) */ +#define INTERRUPT_AFE BIT(7) /* AFE module */ +#define INTERRUPT_HDCP BIT(6) /* HDCP module */ +#define INTERRUPT_AUDIO BIT(5) /* Audio module */ +#define INTERRUPT_INFO BIT(4) /* Infoframe module */ +#define INTERRUPT_MODE BIT(3) /* HDMI mode module */ +#define INTERRUPT_RATE BIT(2) /* rate module */ +#define INTERRUPT_DDC BIT(1) /* DDC module */ +#define INTERRUPT_SUS BIT(0) /* SUS module */
+/* INT_FLG_CLR_HDCP bits */ +#define MASK_HDCP_MTP BIT(7) /* HDCP MTP busy */ +#define MASK_HDCP_DLMTP BIT(4) /* HDCP end download MTP to SRAM */ +#define MASK_HDCP_DLRAM BIT(3) /* HDCP end download keys from SRAM */ +#define MASK_HDCP_ENC BIT(2) /* HDCP ENC */ +#define MASK_STATE_C5 BIT(1) /* HDCP State C5 reached */ +#define MASK_AKSV BIT(0) /* AKSV received (start of auth) */
+/* INT_FLG_CLR_RATE bits */ +#define MASK_RATE_B_DRIFT BIT(7) /* Rate measurement drifted */ +#define MASK_RATE_B_ST BIT(6) /* Rate measurement stability change */ +#define MASK_RATE_B_ACT BIT(5) /* Rate measurement activity change */ +#define MASK_RATE_B_PST BIT(4) /* Rate measreument presence change */ +#define MASK_RATE_A_DRIFT BIT(3) /* Rate measurement drifted */ +#define MASK_RATE_A_ST BIT(2) /* Rate measurement stability change */ +#define MASK_RATE_A_ACT BIT(1) /* Rate measurement presence change */ +#define MASK_RATE_A_PST BIT(0) /* Rate measreument presence change */
+/* INT_FLG_CLR_SUS (Start Up Sequencer) bits */ +#define MASK_MPT BIT(7) /* Config MTP end of process */ +#define MASK_FMT BIT(5) /* Video format changed */ +#define MASK_RT_PULSE BIT(4) /* End of termination resistance pulse */ +#define MASK_SUS_END BIT(3) /* SUS last state reached */ +#define MASK_SUS_ACT BIT(2) /* Activity of selected input changed */ +#define MASK_SUS_CH BIT(1) /* Selected input changed */ +#define MASK_SUS_ST BIT(0) /* SUS state changed */
+/* INT_FLG_CLR_DDC bits */ +#define MASK_EDID_MTP BIT(7) /* EDID MTP end of process */ +#define MASK_DDC_ERR BIT(6) /* master DDC error */ +#define MASK_DDC_CMD_DONE BIT(5) /* master DDC cmd send correct */ +#define MASK_READ_DONE BIT(4) /* End of down EDID read */ +#define MASK_RX_DDC_SW BIT(3) /* Output DDC switching finished */ +#define MASK_HDCP_DDC_SW BIT(2) /* HDCP DDC switching finished */ +#define MASK_HDP_PULSE_END BIT(1) /* End of Hot Plug Detect pulse */ +#define MASK_DET_5V BIT(0) /* Detection of +5V */
+/* INT_FLG_CLR_MODE bits */ +#define MASK_HDMI_FLG BIT(7) /* HDMI mode/avmute/encrypt/FIFO fail */ +#define MASK_GAMUT BIT(6) /* Gamut packet */ +#define MASK_ISRC2 BIT(5) /* ISRC2 packet */ +#define MASK_ISRC1 BIT(4) /* ISRC1 packet */ +#define MASK_ACP BIT(3) /* Audio Content Protection packet */ +#define MASK_DC_NO_GCP BIT(2) /* GCP not received in 5 frames */ +#define MASK_DC_PHASE BIT(1) /* deepcolor pixel phase needs update */ +#define MASK_DC_MODE BIT(0) /* deepcolor color depth changed */
+/* INT_FLG_CLR_INFO bits (Infoframe Change Status) */ +#define MASK_MPS_IF BIT(6) /* MPEG Source Product */ +#define MASK_AUD_IF BIT(5) /* Audio */ +#define MASK_SPD_IF BIT(4) /* Source Product Descriptor */ +#define MASK_AVI_IF BIT(3) /* Auxiliary Video IF */ +#define MASK_VS_IF_OTHER_BK2 BIT(2) /* Vendor Specific (bank2) */ +#define MASK_VS_IF_OTHER_BK1 BIT(1) /* Vendor Specific (bank1) */ +#define MASK_VS_IF_HDMI BIT(0) /* Vendor Specific (w/ HDMI LLC code) */
+/* INT_FLG_CLR_AUDIO bits */ +#define MASK_AUDIO_FREQ_FLG BIT(5) /* Audio freq change */ +#define MASK_AUDIO_FLG BIT(4) /* DST, OBA, HBR, ASP change */ +#define MASK_MUTE_FLG BIT(3) /* Audio Mute */ +#define MASK_CH_STATE BIT(2) /* Channel status */ +#define MASK_UNMUTE_FIFO BIT(1) /* Audio Unmute */ +#define MASK_ERROR_FIFO_PT BIT(0) /* Audio FIFO pointer error */
+/* INT_FLG_CLR_AFE bits */ +#define MASK_AFE_WDL_UNLOCKED BIT(7) /* Wordlocker was unlocked */ +#define MASK_AFE_GAIN_DONE BIT(6) /* Gain calibration done */ +#define MASK_AFE_OFFSET_DONE BIT(5) /* Offset calibration done */ +#define MASK_AFE_ACTIVITY_DET BIT(4) /* Activity detected on data */ +#define MASK_AFE_PLL_LOCK BIT(3) /* TMDS PLL is locked */ +#define MASK_AFE_TRMCAL_DONE BIT(2) /* Termination calibration done */ +#define MASK_AFE_ASU_STATE BIT(1) /* ASU state is reached */ +#define MASK_AFE_ASU_READY BIT(0) /* AFE calibration done: TMDS ready */
+/* Audio Output */ +#define AUDCFG_CLK_INVERT BIT(7) /* invert A_CLK polarity */ +#define AUDCFG_TEST_TONE BIT(6) /* enable test tone generator */ +#define AUDCFG_BUS_SHIFT 5 +#define AUDCFG_BUS_I2S 0L +#define AUDCFG_BUS_SPDIF 1L +#define AUDCFG_I2SW_SHIFT 4 +#define AUDCFG_I2SW_16 0L +#define AUDCFG_I2SW_32 1L +#define AUDCFG_AUTO_MUTE_EN BIT(3) /* Enable Automatic audio mute */ +#define AUDCFG_HBR_SHIFT 2 +#define AUDCFG_HBR_STRAIGHT 0L /* straight via AP0 */ +#define AUDCFG_HBR_DEMUX 1L /* demuxed via AP0:AP3 */ +#define AUDCFG_TYPE_MASK 0x03 +#define AUDCFG_TYPE_SHIFT 0 +#define AUDCFG_TYPE_DST 3L /* Direct Stream Transfer (DST) */ +#define AUDCFG_TYPE_OBA 2L /* One Bit Audio (OBA) */ +#define AUDCFG_TYPE_HBR 1L /* High Bit Rate (HBR) */ +#define AUDCFG_TYPE_PCM 0L /* Audio samples */
+/* Video Formatter */ +#define OF_VP_ENABLE BIT(7) /* VP[35:0]/HS/VS/DE/CLK */ +#define OF_BLK BIT(4) /* blanking codes */ +#define OF_TRC BIT(3) /* timing codes (SAV/EAV) */ +#define OF_FMT_MASK 0x3 +#define OF_FMT_444 0L /* RGB444/YUV444 */ +#define OF_FMT_422_SMPT 1L /* YUV422 semi-planar */ +#define OF_FMT_422_CCIR 2L /* YUV422 CCIR656 */
+/* HS/HREF output control */ +#define HS_HREF_DELAY_MASK 0xf0 +#define HS_HREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */ +#define HS_HREF_PXQ_SHIFT 3 /* Timing codes from HREF */ +#define HS_HREF_INV_SHIFT 2 /* polarity (1=invert) */ +#define HS_HREF_SEL_MASK 0x03 +#define HS_HREF_SEL_SHIFT 0 +#define HS_HREF_SEL_HS_VHREF 0L /* HS from VHREF */ +#define HS_HREF_SEL_HREF_VHREF 1L /* HREF from VHREF */ +#define HS_HREF_SEL_HREF_HDMI 2L /* HREF from HDMI */ +#define HS_HREF_SEL_NONE 3L /* not generated */
+/* VS output control */ +#define VS_VREF_DELAY_MASK 0xf0 +#define VS_VREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */ +#define VS_VREF_INV_SHIFT 2 /* polarity (1=invert) */ +#define VS_VREF_SEL_MASK 0x03 +#define VS_VREF_SEL_SHIFT 0 +#define VS_VREF_SEL_VS_VHREF 0L /* VS from VHREF */ +#define VS_VREF_SEL_VREF_VHREF 1L /* VREF from VHREF */ +#define VS_VREF_SEL_VREF_HDMI 2L /* VREF from HDMI */ +#define VS_VREF_SEL_NONE 3L /* not generated */
+/* DE/FREF output control */ +#define DE_FREF_DELAY_MASK 0xf0 +#define DE_FREF_DELAY_SHIFT 4 /* Pixel delay (-8..+7) */ +#define DE_FREF_DE_PXQ_SHIFT 3 /* Timing codes from DE */ +#define DE_FREF_INV_SHIFT 2 /* polarity (1=invert) */ +#define DE_FREF_SEL_MASK 0x03 +#define DE_FREF_SEL_SHIFT 0 +#define DE_FREF_SEL_DE_VHREF 0L /* DE from VHREF (HREF and not(VREF) */ +#define DE_FREF_SEL_FREF_VHREF 1L /* FREF from VHREF */ +#define DE_FREF_SEL_FREF_HDMI 2L /* FREF from HDMI */ +#define DE_FREF_SEL_NONE 3L /* not generated */
+/* HDMI_SOFT_RST bits */ +#define RESET_DC BIT(7) /* Reset deep color module */ +#define RESET_HDCP BIT(6) /* Reset HDCP module */ +#define RESET_KSV BIT(5) /* Reset KSV-FIFO */ +#define RESET_SCFG BIT(4) /* Reset HDCP and repeater function */ +#define RESET_HCFG BIT(3) /* Reset HDCP DDC part */ +#define RESET_PA BIT(2) /* Reset polarity adjust */ +#define RESET_EP BIT(1) /* Reset Error protection */ +#define RESET_TMDS BIT(0) /* Reset TMDS (calib, encoding, flow) */
+/* HDMI_INFO_RST bits */ +#define NACK_HDCP BIT(7) /* No ACK on HDCP request */ +#define RESET_FIFO BIT(4) /* Reset Audio FIFO control */ +#define RESET_GAMUT BIT(3) /* Clear Gamut packet */ +#define RESET_AI BIT(2) /* Clear ACP and ISRC packets */ +#define RESET_IF BIT(1) /* Clear all Audio infoframe packets */ +#define RESET_AUDIO BIT(0) /* Reset Audio FIFO control */
+/* HDCP_BCAPS bits */ +#define HDCP_HDMI BIT(7) /* HDCP suports HDMI (vs DVI only) */ +#define HDCP_REPEATER BIT(6) /* HDCP supports repeater function */ +#define HDCP_READY BIT(5) /* set by repeater function */ +#define HDCP_FAST BIT(4) /* Up to 400kHz */ +#define HDCP_11 BIT(1) /* HDCP 1.1 supported */ +#define HDCP_FAST_REAUTH BIT(0) /* fast reauthentication supported */
+/* Audio output formatter */ +#define AUDIO_LAYOUT_SP_FLAG BIT(2) /* sp flag used by FIFO */ +#define AUDIO_LAYOUT_MANUAL BIT(1) /* manual layout (vs per pkt) */ +#define AUDIO_LAYOUT_LAYOUT1 BIT(0) /* Layout1: AP0-3 vs Layout0:AP0 */
+/* masks for interrupt status registers */ +#define MASK_SUS_STATUS 0x1F +#define LAST_STATE_REACHED 0x1B +#define MASK_CLK_STABLE 0x04 +#define MASK_CLK_ACTIVE 0x02 +#define MASK_SUS_STATE 0x10 +#define MASK_SR_FIFO_FIFO_CTRL 0x30 +#define MASK_AUDIO_FLAG 0x10
+/* Rate measurement */ +#define RATE_REFTIM_ENABLE 0x01 +#define CLK_MIN_RATE 0x0057e4 +#define CLK_MAX_RATE 0x0395f8 +#define WDL_CFG_VAL 0x82 +#define DC_FILTER_VAL 0x31
+/* Infoframe */ +#define VS_HDMI_IF_UPDATE 0x0200 +#define VS_HDMI_IF 0x0201 +#define VS_BK1_IF_UPDATE 0x0220 +#define VS_BK1_IF 0x0221 +#define VS_BK2_IF_UPDATE 0x0240 +#define VS_BK2_IF 0x0241 +#define AVI_IF_UPDATE 0x0260 +#define AVI_IF 0x0261 +#define SPD_IF_UPDATE 0x0280 +#define SPD_IF 0x0281 +#define AUD_IF_UPDATE 0x02a0 +#define AUD_IF 0x02a1 +#define MPS_IF_UPDATE 0x02c0 +#define MPS_IF 0x02c1
+/* Audio formats */ +static const char * const audtype_names[] = {
- "PCM", /* PCM Samples */
- "HBR", /* High Bit Rate Audio */
- "OBA", /* One-Bit Audio */
- "DST" /* Direct Stream Transfer */
+};
+/* Audio output port formats */ +enum audfmt_types {
- AUDFMT_TYPE_DISABLED = 0,
- AUDFMT_TYPE_I2S,
- AUDFMT_TYPE_SPDIF,
+}; +static const char * const audfmt_names[] = {
- "disabled",
- "I2S",
- "SPDIF",
+};
+/* Video output port formats */ +static const char * const vidfmt_names[] = {
- "RGB444/YUV444", /* RGB/YUV444 16bit data bus, 8bpp */
- "YUV422 semi-planar", /* YUV422 16bit data base, 8bpp */
- "YUV422 CCIR656", /* BT656 (YUV 8bpp 2 clock per pixel) */
- "invalid",
+};
+/*
- Video Output formats
- There are 24 video output pins on TDA19971 and 36 on TDA19973 supporting
- the following output formats:
- RGB444
- YUV444
- YUV422 semi-planar based on ITU-R BT.601
- YUV422 ITU-R BT.656
- TDA19971 can output 3x8bits per pixel
- TDA19973 can output 3x8, 3x10, or 3x12bit per pixel
- Deep color modes (3x10 or 3x12 bits) are possible in any case.
- Reference: NXP AN1206 - TDA19971_TDA19973 receiver HW recommendation: 3.3.4
- */
+static u32 tda19971_video_formats[] = {
- /* 24bit RGB444: 1 pixel in 1x24bit sample: VP[23:0] */
- MEDIA_BUS_FMT_RGB888_1X24,
- /* 24bit YUV444: 1 pixel in 1x24bit sample: VP[23:0] */
- MEDIA_BUS_FMT_YUV8_1X24,
- /* 24bit YUV422: 1 pixel in 1x24bit sample: VP[23:12]/VP[11:0] */
- MEDIA_BUS_FMT_UYVY12_1X24,
- /* 20bit YUV422: 1 pixel in 1x20bit sample: VP[23:14]/VP[11:2] */
- MEDIA_BUS_FMT_UYVY10_1X20,
- /* 16bit YUV422: 1 pixel in 1x16bit sample: VP[23:16]/VP[15:8] */
- MEDIA_BUS_FMT_UYVY8_1X16,
- /* 12bit CCIR656: 1 pixel in 2x12bit samples: VP[23:12] */
- MEDIA_BUS_FMT_UYVY12_2X12,
- /* 10bit CCIR656: 1 pixel in 2x10bit samples: VP[23:14] */
- MEDIA_BUS_FMT_UYVY10_2X10,
- /* 8bit CCIR656: 1 pixel in 2x8bit samples: VP[23:16] */
- MEDIA_BUS_FMT_UYVY8_2X8,
+}; +static u32 tda19973_video_formats[] = {
- /* 36bit RGB444: 1 pixel in 1x36bit sample on VP[35:0] */
- MEDIA_BUS_FMT_RGB121212_1X36,
- /* 36bit YUV444 1 pixel in 1x36bit sample on VP[35:0] */
- MEDIA_BUS_FMT_YUV12_1X36,
- /* 24bit YUV422: 1 pixel in 1x24bit sample on VP[35:24]/VP[11:0] */
- MEDIA_BUS_FMT_UYVY12_1X24,
- /* 12bit CCIR656: 1 pixel in 2x12bit samples on VP[11:0] */
- MEDIA_BUS_FMT_UYVY12_2X12,
+};
+/*
- Colorspace conversion matricies
Typo: matricies -> matrices
- */
+struct color_matrix_coefs {
- const char *name;
- /* Input offsets */
- s16 offint1;
- s16 offint2;
- s16 offint3;
- /* Coeficients */
- s16 p11coef;
- s16 p12coef;
- s16 p13coef;
- s16 p21coef;
- s16 p22coef;
- s16 p23coef;
- s16 p31coef;
- s16 p32coef;
- s16 p33coef;
- /* Output offsets */
- s16 offout1;
- s16 offout2;
- s16 offout3;
+};
+enum {
- ITU709_RGBLIMITED,
- ITU709_RGBFULL,
- ITU601_RGBLIMITED,
- ITU601_RGBFULL,
- RGBLIMITED_RGBFULL,
- RGBLIMITED_ITU601,
- RGBFULL_ITU601,
This can't be right.
You have these conversions:
ITU709_RGBFULL ITU601_RGBFULL RGBLIMITED_RGBFULL RGBLIMITED_ITU601 RGBFULL_ITU601 RGBLIMITED_ITU709 RGBFULL_ITU709
I.e. on the HDMI receiver side you can receive RGB full/limited or ITU601/709. On the output side you have RGB full or ITU601/709.
So something like ITU709_RGBLIMITED makes no sense.
+};
+/* NB: 4096 is 1.0 using fixed point numbers */ +static const struct color_matrix_coefs conv_matrix[] = {
- {
"YUV709 -> RGB limited",-256, -2048, -2048,4096, -1875, -750,4096, 6307, 0,4096, 0, 7431,256, 256, 256,- },
- {
"YUV709 -> RGB full",-256, -2048, -2048,4769, -2183, -873,4769, 7343, 0,4769, 0, 8652,0, 0, 0,- },
- {
"YUV601 -> RGB limited",-256, -2048, -2048,4096, -2860, -1378,4096, 5615, 0,4096, 0, 7097,256, 256, 256,- },
- {
"YUV601 -> RGB full",-256, -2048, -2048,4769, -3330, -1602,4769, 6538, 0,4769, 0, 8264,256, 256, 256,- },
- {
"RGB limited -> RGB full",-256, -256, -256,0, 4769, 0,0, 0, 4769,4769, 0, 0,0, 0, 0,- },
- {
"RGB limited -> ITU601",-256, -256, -256,2404, 1225, 467,-1754, 2095, -341,-1388, -707, 2095,256, 2048, 2048,- },
- {
"RGB full -> ITU601",0, 0, 0,2065, 1052, 401,-1506, 1799, -293,-1192, -607, 1799,256, 2048, 2048,- },
+};
+static const struct v4l2_dv_timings_cap tda1997x_dv_timings_cap = {
- .type = V4L2_DV_BT_656_1120,
- /* keep this initialization for compatibility with GCC < 4.4.6 */
- .reserved = { 0 },
- V4L2_INIT_BT_TIMINGS(
640, 1920, /* min/max width */480, 1080, /* min/max height */13000000, 165000000, /* min/max pixelclock */V4L2_DV_BT_STD_CEA861 | V4L2_DV_BT_STD_DMT, /* standards */V4L2_DV_BT_CAP_PROGRESSIVE /* capabilities */- )
+};
+/*
- Video Input formats
- */
+static const struct v4l2_dv_timings tda1997x_hdmi_modes[] = {
- V4L2_DV_BT_DMT_640X350P85,
- V4L2_DV_BT_DMT_640X400P85,
- V4L2_DV_BT_DMT_640X480P60,
- V4L2_DV_BT_DMT_640X480P72,
- V4L2_DV_BT_DMT_640X480P75,
- V4L2_DV_BT_DMT_720X400P85,
- V4L2_DV_BT_CEA_720X480I59_94,
- V4L2_DV_BT_CEA_720X480P59_94,
- V4L2_DV_BT_CEA_720X576I50,
- V4L2_DV_BT_CEA_720X576P50,
- V4L2_DV_BT_DMT_800X600P60,
- V4L2_DV_BT_DMT_800X600P72,
- V4L2_DV_BT_DMT_800X600P75,
- V4L2_DV_BT_DMT_800X600P85,
- V4L2_DV_BT_DMT_1024X768P60,
- V4L2_DV_BT_DMT_1024X768P70,
- V4L2_DV_BT_DMT_1024X768P75,
- V4L2_DV_BT_DMT_1024X768P85,
- V4L2_DV_BT_CEA_1280X720P24,
- V4L2_DV_BT_CEA_1280X720P25,
- V4L2_DV_BT_CEA_1280X720P30,
- V4L2_DV_BT_CEA_1280X720P50,
- V4L2_DV_BT_CEA_1280X720P60,
- V4L2_DV_BT_DMT_1280X768P60_RB,
- V4L2_DV_BT_DMT_1280X768P75,
- V4L2_DV_BT_DMT_1280X768P85,
- V4L2_DV_BT_DMT_1280X960P60,
- V4L2_DV_BT_DMT_1280X1024P60,
- V4L2_DV_BT_DMT_1280X1024P85,
- V4L2_DV_BT_DMT_1280X1024P75,
- V4L2_DV_BT_DMT_1360X768P60,
- V4L2_DV_BT_DMT_1440X900P60,
- V4L2_DV_BT_DMT_1400X1050P60_RB,
- V4L2_DV_BT_DMT_1400X1050P60,
- V4L2_DV_BT_DMT_1600X1200P60,
- V4L2_DV_BT_DMT_1680X1050P60_RB,
- V4L2_DV_BT_CEA_1920X1080P24,
- V4L2_DV_BT_CEA_1920X1080P25,
- V4L2_DV_BT_CEA_1920X1080P30,
- V4L2_DV_BT_CEA_1920X1080I50,
- V4L2_DV_BT_CEA_1920X1080P50,
- V4L2_DV_BT_CEA_1920X1080I60,
- V4L2_DV_BT_CEA_1920X1080P60,
- V4L2_DV_BT_DMT_1920X1200P60_RB,
+};
+/* regulator supplies */ +static const char * const tda1997x_supply_name[] = {
- "DOVDD", /* Digital I/O supply */
- "DVDD", /* Digital Core supply */
- "AVDD", /* Analog supply */
+};
+#define TDA1997X_NUM_SUPPLIES ARRAY_SIZE(tda1997x_supply_name)
+enum tda1997x_type {
- TDA19971,
- TDA19973,
+};
+enum tda1997x_hdmi_pads {
- TDA1997X_PAD_SOURCE,
- TDA1997X_NUM_PADS,
+};
+struct tda1997x_chip_info {
- enum tda1997x_type type;
- const char *name;
- const u32 *formats;
- unsigned int nformats;
+};
+struct tda1997x_state {
- const struct tda1997x_chip_info *info;
- struct tda1997x_platform_data pdata;
- struct i2c_client *client;
- struct i2c_client *client_cec;
- struct v4l2_subdev sd;
- struct regulator_bulk_data supplies[TDA1997X_NUM_SUPPLIES];
- struct media_pad pads[TDA1997X_NUM_PADS];
- struct mutex lock;
- struct mutex page_lock;
- char page;
- /* detected info from chip */
- int chip_revision;
- char port_30bit;
- char output_2p5;
- char tmdsb_clk;
- char tmdsb_soc;
- /* status info */
- char hdmi_status;
- char mptrw_in_progress;
- char state_c5_reached;
- char activity_status;
- char input_detect[2];
- /* video */
- enum hdmi_colorspace colorspace;
- enum hdmi_colorimetry colorimetry;
- enum hdmi_quantization_range range;
- enum hdmi_content_type content;
- struct v4l2_dv_timings timings;
- const struct v4l2_dv_timings *detected_timings;
- int fps;
- const struct color_matrix_coefs *conv;
- u32 code;
- enum v4l2_mbus_type bus_type;
- u8 vid_fmt;
- /* controls */
- struct v4l2_ctrl_handler hdl;
- struct v4l2_ctrl *detect_tx_5v_ctrl;
- struct v4l2_ctrl *rgb_quantization_range_ctrl;
- /* audio */
- u8 audio_ch_alloc;
- int audio_samplerate;
- int audio_channels;
- int audio_samplesize;
- int audio_type;
- struct mutex audio_lock;
- struct snd_pcm_substream *audio_stream;
- /* EDID */
- struct {
u8 edid[256];u32 present;unsigned int blocks;- } edid;
- struct delayed_work delayed_work_enable_hpd;
+};
+static const struct v4l2_event tda1997x_ev_fmt = {
- .type = V4L2_EVENT_SOURCE_CHANGE,
- .u.src_change.changes = V4L2_EVENT_SRC_CH_RESOLUTION,
+};
+static const struct tda1997x_chip_info tda1997x_chip_info[] = {
- [TDA19971] = {
.type = TDA19971,.name = "tda19971",.formats = tda19971_video_formats,.nformats = ARRAY_SIZE(tda19971_video_formats),- },
- [TDA19973] = {
.type = TDA19973,.name = "tda19973",.formats = tda19973_video_formats,.nformats = ARRAY_SIZE(tda19973_video_formats),- },
+};
+static inline struct tda1997x_state *to_state(struct v4l2_subdev *sd) +{
- return container_of(sd, struct tda1997x_state, sd);
+}
+static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) +{
- return &container_of(ctrl->handler, struct tda1997x_state, hdl)->sd;
+}
+static int tda1997x_cec_read(struct v4l2_subdev *sd, u8 reg) +{
- struct tda1997x_state *state = to_state(sd);
- int val;
- val = i2c_smbus_read_byte_data(state->client_cec, reg);
- if (val < 0) {
v4l_err(state->client, "read reg error: reg=%2x\n", reg);val = -1;- }
- return val;
+}
+static int tda1997x_cec_write(struct v4l2_subdev *sd, u8 reg, u8 val) +{
- struct tda1997x_state *state = to_state(sd);
- int ret = 0;
- ret = i2c_smbus_write_byte_data(state->client_cec, reg, val);
- if (ret < 0) {
v4l_err(state->client, "write reg error:reg=%2x,val=%2x\n",reg, val);ret = -1;- }
- return ret;
+}
+/* -----------------------------------------------------------------------------
- I2C transfer
- */
+static int tda1997x_setpage(struct v4l2_subdev *sd, u8 page) +{
- struct tda1997x_state *state = to_state(sd);
- int ret;
- if (state->page != page) {
ret = i2c_smbus_write_byte_data(state->client,REG_CURPAGE_00H, page);if (ret < 0) {v4l_err(state->client,"write reg error:reg=%2x,val=%2x\n",REG_CURPAGE_00H, page);return ret;}state->page = page;- }
- return 0;
+}
+static inline int io_read(struct v4l2_subdev *sd, u16 reg) +{
- struct tda1997x_state *state = to_state(sd);
- int val;
- mutex_lock(&state->page_lock);
- if (tda1997x_setpage(sd, reg >> 8)) {
val = -1;goto out;- }
- val = i2c_smbus_read_byte_data(state->client, reg&0xff);
- if (val < 0) {
v4l_err(state->client, "read reg error: reg=%2x\n", reg & 0xff);val = -1;goto out;- }
+out:
- mutex_unlock(&state->page_lock);
- return val;
+}
+static inline long io_read16(struct v4l2_subdev *sd, u16 reg) +{
- u8 val;
- long lval = 0;
- val = io_read(sd, reg);
- if (val < 0)
return val;- lval |= (val << 8);
- val = io_read(sd, reg + 1);
- if (val < 0)
return val;- lval |= val;
- return lval;
+}
+static inline long io_read24(struct v4l2_subdev *sd, u16 reg) +{
- u8 val;
- long lval = 0;
- val = io_read(sd, reg);
- if (val < 0)
return val;- lval |= (val << 16);
- val = io_read(sd, reg + 1);
- if (val < 0)
return val;- lval |= (val << 8);
- val = io_read(sd, reg + 2);
- if (val < 0)
return val;- lval |= val;
- return lval;
+}
+static unsigned int io_readn(struct v4l2_subdev *sd, u16 reg, u8 len, u8 *data) +{
- int i;
- int sz = 0;
- u8 val;
- for (i = 0; i < len; i++) {
val = io_read(sd, reg + i);if (val < 0)break;data[i] = val;sz++;- }
- return sz;
+}
+static int io_write(struct v4l2_subdev *sd, u16 reg, u8 val) +{
- struct tda1997x_state *state = to_state(sd);
- s32 ret = 0;
- mutex_lock(&state->page_lock);
- if (tda1997x_setpage(sd, reg >> 8)) {
ret = -1;goto out;- }
- ret = i2c_smbus_write_byte_data(state->client, reg & 0xff, val);
- if (ret < 0) {
v4l_err(state->client, "write reg error:reg=%2x,val=%2x\n",reg&0xff, val);ret = -1;goto out;- }
+out:
- mutex_unlock(&state->page_lock);
- return ret;
+}
+static int io_write16(struct v4l2_subdev *sd, u16 reg, u16 val) +{
- int ret;
- ret = io_write(sd, reg, (val >> 8) & 0xff);
- if (ret < 0)
return ret;- ret = io_write(sd, reg + 1, val & 0xff);
- if (ret < 0)
return ret;- return 0;
+}
+static int io_write24(struct v4l2_subdev *sd, u16 reg, u32 val) +{
- int ret;
- ret = io_write(sd, reg, (val >> 16) & 0xff);
- if (ret < 0)
return ret;- ret = io_write(sd, reg + 1, (val >> 8) & 0xff);
- if (ret < 0)
return ret;- ret = io_write(sd, reg + 2, val & 0xff);
- if (ret < 0)
return ret;- return 0;
+}
+/* -----------------------------------------------------------------------------
- Hotplug
- */
+enum hpd_mode {
- HPD_LOW_BP, /* HPD low and pulse of at least 100ms */
- HPD_LOW_OTHER, /* HPD low and pulse of at least 100ms */
- HPD_HIGH_BP, /* HIGH */
- HPD_HIGH_OTHER,
- HPD_PULSE, /* HPD low pulse */
+};
+/* manual HPD (Hot Plug Detect) control */ +static int tda1997x_manual_hpd(struct v4l2_subdev *sd, enum hpd_mode mode) +{
- u8 hpd_auto, hpd_pwr, hpd_man;
- hpd_auto = io_read(sd, REG_HPD_AUTO_CTRL);
- hpd_pwr = io_read(sd, REG_HPD_POWER);
- hpd_man = io_read(sd, REG_HPD_MAN_CTRL);
- /* mask out unused bits */
- hpd_man &= (HPD_MAN_CTRL_HPD_PULSE |
HPD_MAN_CTRL_5VEN |HPD_MAN_CTRL_HPD_B |HPD_MAN_CTRL_HPD_A);- switch (mode) {
- /* HPD low and pulse of at least 100ms */
- case HPD_LOW_BP:
/* hpd_bp=0 */hpd_pwr &= ~HPD_POWER_BP_MASK;/* disable HPD_A and HPD_B */hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);io_write(sd, REG_HPD_POWER, hpd_pwr);io_write(sd, REG_HPD_MAN_CTRL, hpd_man);break;- /* HPD high */
- case HPD_HIGH_BP:
/* hpd_bp=1 */hpd_pwr &= ~HPD_POWER_BP_MASK;hpd_pwr |= 1 << HPD_POWER_BP_SHIFT;io_write(sd, REG_HPD_POWER, hpd_pwr);break;- /* HPD low and pulse of at least 100ms */
- case HPD_LOW_OTHER:
/* disable HPD_A and HPD_B */hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);/* hp_other=0 */hpd_auto &= ~HPD_AUTO_HP_OTHER;io_write(sd, REG_HPD_AUTO_CTRL, hpd_auto);io_write(sd, REG_HPD_MAN_CTRL, hpd_man);break;- /* HPD high */
- case HPD_HIGH_OTHER:
hpd_auto |= HPD_AUTO_HP_OTHER;io_write(sd, REG_HPD_AUTO_CTRL, hpd_auto);break;- /* HPD low pulse */
- case HPD_PULSE:
/* disable HPD_A and HPD_B */hpd_man &= ~(HPD_MAN_CTRL_HPD_A | HPD_MAN_CTRL_HPD_B);io_write(sd, REG_HPD_MAN_CTRL, hpd_man);break;- }
- return 0;
+}
+static void tda1997x_delayed_work_enable_hpd(struct work_struct *work) +{
- struct delayed_work *dwork = to_delayed_work(work);
- struct tda1997x_state *state = container_of(dwork,
struct tda1997x_state,delayed_work_enable_hpd);- struct v4l2_subdev *sd = &state->sd;
- v4l2_dbg(2, debug, sd, "%s:\n", __func__);
- /* Set HPD high */
- tda1997x_manual_hpd(sd, HPD_HIGH_OTHER);
- tda1997x_manual_hpd(sd, HPD_HIGH_BP);
- state->edid.present = 1;
+}
+static void tda1997x_disable_edid(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- v4l2_dbg(1, debug, sd, "%s\n", __func__);
- cancel_delayed_work_sync(&state->delayed_work_enable_hpd);
- /* Set HPD low */
- tda1997x_manual_hpd(sd, HPD_LOW_BP);
+}
+static void tda1997x_enable_edid(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- v4l2_dbg(1, debug, sd, "%s\n", __func__);
- /* Enable hotplug after 100ms */
- schedule_delayed_work(&state->delayed_work_enable_hpd, HZ / 10);
+}
+/* -----------------------------------------------------------------------------
- Signal Control
- */
+/*
- The color conversion matrix will convert between the colorimetry of the
- HDMI input to the desired output format RGB|YUV. RGB output is to be
- full-range and YUV is to be limited range.
- RGB full-range uses values from 0 to 255 which is recommended on a monitor
- and RGB Limitted uses values from 16 to 236 (16=black, 235=white) which is
Typo: Limitted -> Limited
- typically recommended on a TV.
- */
+static int +tda1997x_configure_csc(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- /* Blanking code values depend on output colorspace (RGB or YUV) */
- struct blanking_codes {
s16 code_gy;s16 code_bu;s16 code_rv;- };
- static const struct blanking_codes rgb_blanking = { 64, 64, 64 };
- static const struct blanking_codes yuv_blanking = { 64, 512, 512 };
- const struct blanking_codes *blanking_codes = NULL;
- u8 reg;
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- state->conv = NULL;
- switch (state->vid_fmt) {
- /* RGB output */
- case OF_FMT_444:
blanking_codes = &rgb_blanking;if (state->colorspace == HDMI_COLORSPACE_RGB) {if (state->range == HDMI_QUANTIZATION_RANGE_LIMITED)state->conv = &conv_matrix[RGBLIMITED_RGBFULL];} else {if (state->colorimetry == HDMI_COLORIMETRY_ITU_709)state->conv = &conv_matrix[ITU709_RGBFULL];else if (state->colorimetry == HDMI_COLORIMETRY_ITU_601)state->conv = &conv_matrix[ITU601_RGBFULL];}break;- /* YUV output */
- case OF_FMT_422_SMPT: /* semi-planar */
- case OF_FMT_422_CCIR: /* CCIR656 */
blanking_codes = &yuv_blanking;if ((state->colorspace == HDMI_COLORSPACE_RGB) &&(state->range == HDMI_QUANTIZATION_RANGE_FULL))state->conv = &conv_matrix[RGBFULL_ITU601];else if ((state->colorspace == HDMI_COLORSPACE_RGB) &&(state->range == HDMI_QUANTIZATION_RANGE_LIMITED))state->conv = &conv_matrix[RGBLIMITED_ITU601];break;- }
- if (state->conv) {
/* enable matrix conversion */reg = io_read(sd, REG_VDP_CTRL);reg &= ~VDP_CTRL_MATRIX_BP;io_write(sd, REG_VDP_CTRL, reg);/* offset inputs */io_write16(sd, REG_VDP_MATRIX + 0, state->conv->offint1);io_write16(sd, REG_VDP_MATRIX + 2, state->conv->offint2);io_write16(sd, REG_VDP_MATRIX + 4, state->conv->offint3);/* coefficients */io_write16(sd, REG_VDP_MATRIX + 6, state->conv->p11coef);io_write16(sd, REG_VDP_MATRIX + 8, state->conv->p12coef);io_write16(sd, REG_VDP_MATRIX + 10, state->conv->p13coef);io_write16(sd, REG_VDP_MATRIX + 12, state->conv->p21coef);io_write16(sd, REG_VDP_MATRIX + 14, state->conv->p22coef);io_write16(sd, REG_VDP_MATRIX + 16, state->conv->p23coef);io_write16(sd, REG_VDP_MATRIX + 18, state->conv->p31coef);io_write16(sd, REG_VDP_MATRIX + 20, state->conv->p32coef);io_write16(sd, REG_VDP_MATRIX + 22, state->conv->p33coef);/* offset outputs */io_write16(sd, REG_VDP_MATRIX + 24, state->conv->offout1);io_write16(sd, REG_VDP_MATRIX + 26, state->conv->offout2);io_write16(sd, REG_VDP_MATRIX + 28, state->conv->offout3);- } else {
/* disable matrix conversion */reg = io_read(sd, REG_VDP_CTRL);reg |= VDP_CTRL_MATRIX_BP;io_write(sd, REG_VDP_CTRL, reg);- }
- /* SetBlankingCodes */
- if (blanking_codes) {
io_write16(sd, REG_BLK_GY, blanking_codes->code_gy);io_write16(sd, REG_BLK_BU, blanking_codes->code_bu);io_write16(sd, REG_BLK_RV, blanking_codes->code_rv);- }
- return 0;
+}
+/* Configure frame detection window and VHREF timing generator */ +static int +tda1997x_configure_vhref(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- const struct v4l2_bt_timings *bt;
- int width, lines;
- u16 href_start, href_end;
- u16 vref_f1_start, vref_f2_start;
- u8 vref_f1_width, vref_f2_width;
- u8 field_polarity;
- u16 fieldref_f1_start, fieldref_f2_start;
- u8 reg;
- if (!state->detected_timings)
return -EINVAL;- bt = &state->detected_timings->bt;
- href_start = bt->hbackporch + bt->hsync + 1;
- href_end = href_start + bt->width;
- vref_f1_start = bt->height + bt->vbackporch + bt->vsync +
bt->il_vbackporch + bt->il_vsync +bt->il_vfrontporch;- vref_f1_width = bt->vbackporch + bt->vsync + bt->vfrontporch;
- vref_f2_start = 0;
- vref_f2_width = 0;
- fieldref_f1_start = 0;
- fieldref_f2_start = 0;
- if (bt->interlaced) {
vref_f2_start = (bt->height / 2) +(bt->il_vbackporch + bt->il_vsync - 1);vref_f2_width = bt->il_vbackporch + bt->il_vsync +bt->il_vfrontporch;fieldref_f2_start = vref_f2_start + bt->il_vfrontporch +fieldref_f1_start;- }
- field_polarity = 0;
- width = V4L2_DV_BT_FRAME_WIDTH(bt);
- lines = V4L2_DV_BT_FRAME_HEIGHT(bt);
- /*
* Configure Frame Detection Window:* horiz area where the VHREF module consider a VSYNC a new frame*/- io_write16(sd, REG_FDW_S, 0x2ef); /* start position */
- io_write16(sd, REG_FDW_E, 0x141); /* end position */
- /* Set Pixel And Line Counters */
- if (state->chip_revision == 0)
io_write16(sd, REG_PXCNT_PR, 4);- else
io_write16(sd, REG_PXCNT_PR, 1);- io_write16(sd, REG_PXCNT_NPIX, width & MASK_VHREF);
- io_write16(sd, REG_LCNT_PR, 1);
- io_write16(sd, REG_LCNT_NLIN, lines & MASK_VHREF);
- /*
* Configure the VHRef timing generator responsible for rebuilding all* horiz and vert synch and ref signals from its input allowing auto* detection algorithms and forcing predefined modes (480i & 576i)*/- reg = VHREF_STD_DET_OFF << VHREF_STD_DET_SHIFT;
- io_write(sd, REG_VHREF_CTRL, reg);
- /*
* Configure the VHRef timing values. In case the VHREF generator has* been configured in manual mode, this will allow to manually set all* horiz and vert ref values (non-active pixel areas) of the generator* and allows setting the frame reference params.*/- /* horizontal reference start/end */
- io_write16(sd, REG_HREF_S, href_start & MASK_VHREF);
- io_write16(sd, REG_HREF_E, href_end & MASK_VHREF);
- /* vertical reference f1 start/end */
- io_write16(sd, REG_VREF_F1_S, vref_f1_start & MASK_VHREF);
- io_write(sd, REG_VREF_F1_WIDTH, vref_f1_width);
- /* vertical reference f2 start/end */
- io_write16(sd, REG_VREF_F2_S, vref_f2_start & MASK_VHREF);
- io_write(sd, REG_VREF_F2_WIDTH, vref_f2_width);
- /* F1/F2 FREF, field polarity */
- reg = fieldref_f1_start & MASK_VHREF;
- reg |= field_polarity << 8;
- io_write16(sd, REG_FREF_F1_S, reg);
- reg = fieldref_f2_start & MASK_VHREF;
- io_write16(sd, REG_FREF_F2_S, reg);
- return 0;
+}
+/* Configure Video Output port signals */ +static int +tda1997x_configure_vidout(struct tda1997x_state *state) +{
- struct v4l2_subdev *sd = &state->sd;
- struct tda1997x_platform_data *pdata = &state->pdata;
- u8 prefilter;
- u8 reg;
- /* Configure pixel clock generator: delay, polarity, rate */
- reg = (state->vid_fmt == OF_FMT_422_CCIR) ?
PCLK_SEL_X2 : PCLK_SEL_X1;- reg |= pdata->vidout_delay_pclk << PCLK_DELAY_SHIFT;
- reg |= pdata->vidout_inv_pclk << PCLK_INV_SHIFT;
- io_write(sd, REG_PCLK, reg);
- /* Configure pre-filter */
- prefilter = 0; /* filters off */
- /* YUV422 mode requires conversion */
- if ((state->vid_fmt == OF_FMT_422_SMPT)
|| (state->vid_fmt == OF_FMT_422_CCIR)) {/* 2/7taps for Rv and Bu */prefilter = FILTERS_CTRL_2_7TAP << FILTERS_CTRL_BU_SHIFT |FILTERS_CTRL_2_7TAP << FILTERS_CTRL_RV_SHIFT;- }
- io_write(sd, REG_FILTERS_CTRL, prefilter);
- /* Configure video port */
- reg = state->vid_fmt & OF_FMT_MASK;
- if (state->vid_fmt == OF_FMT_422_CCIR)
reg |= (OF_BLK | OF_TRC);- reg |= OF_VP_ENABLE;
- io_write(sd, REG_OF, reg);
- /* Configure formatter and conversions */
- reg = io_read(sd, REG_VDP_CTRL);
- /* pre-filter is needed unless (REG_FILTERS_CTRL == 0) */
- if (!prefilter)
reg |= VDP_CTRL_PREFILTER_BP;- else
reg &= ~VDP_CTRL_PREFILTER_BP;- /* formatter is needed for YUV422 and for trc/blc codes */
- if (state->vid_fmt == OF_FMT_444)
reg |= VDP_CTRL_FORMATTER_BP;- /* formatter and compdel needed for timing/blanking codes */
- else
reg &= ~(VDP_CTRL_FORMATTER_BP | VDP_CTRL_COMPDEL_BP);- /* activate compdel for small sync delays */
- if ((pdata->vidout_delay_vs < 4) || (pdata->vidout_delay_hs < 4))
reg &= ~VDP_CTRL_COMPDEL_BP;- io_write(sd, REG_VDP_CTRL, reg);
- /* Configure DE output signal: delay, polarity, and source */
- reg = pdata->vidout_delay_de << DE_FREF_DELAY_SHIFT |
pdata->vidout_inv_de << DE_FREF_INV_SHIFT |pdata->vidout_sel_de << DE_FREF_SEL_SHIFT;- io_write(sd, REG_DE_FREF, reg);
- /* Configure HS/HREF output signal: delay, polarity, and source */
- if (state->vid_fmt != OF_FMT_422_CCIR) {
reg = pdata->vidout_delay_hs << HS_HREF_DELAY_SHIFT |pdata->vidout_inv_hs << HS_HREF_INV_SHIFT |pdata->vidout_sel_hs << HS_HREF_SEL_SHIFT;- } else
reg = HS_HREF_SEL_NONE << HS_HREF_SEL_SHIFT;- io_write(sd, REG_HS_HREF, reg);
- /* Configure VS/VREF output signal: delay, polarity, and source */
- if (state->vid_fmt != OF_FMT_422_CCIR) {
reg = pdata->vidout_delay_vs << VS_VREF_DELAY_SHIFT |pdata->vidout_inv_vs << VS_VREF_INV_SHIFT |pdata->vidout_sel_vs << VS_VREF_SEL_SHIFT;- } else
reg = VS_VREF_SEL_NONE << VS_VREF_SEL_SHIFT;- io_write(sd, REG_VS_VREF, reg);
- return 0;
+}
+/* Configure Audio output port signals */ +static int +tda1997x_configure_audout(struct v4l2_subdev *sd, u8 channel_assignment) +{
- struct tda1997x_state *state = to_state(sd);
- struct tda1997x_platform_data *pdata = &state->pdata;
- bool sp_used_by_fifo = 1;
- u8 reg;
- if (!pdata->audout_format)
return 0;- /* channel assignment (CEA-861-D Table 20) */
- io_write(sd, REG_AUDIO_PATH, channel_assignment);
- /* Audio output configuration */
- reg = 0;
- switch (pdata->audout_format) {
- case AUDFMT_TYPE_I2S:
reg |= AUDCFG_BUS_I2S << AUDCFG_BUS_SHIFT;break;- case AUDFMT_TYPE_SPDIF:
reg |= AUDCFG_BUS_SPDIF << AUDCFG_BUS_SHIFT;break;- }
- switch (state->audio_type) {
- case AUDCFG_TYPE_PCM:
reg |= AUDCFG_TYPE_PCM << AUDCFG_TYPE_SHIFT;break;- case AUDCFG_TYPE_OBA:
reg |= AUDCFG_TYPE_OBA << AUDCFG_TYPE_SHIFT;break;- case AUDCFG_TYPE_DST:
reg |= AUDCFG_TYPE_DST << AUDCFG_TYPE_SHIFT;sp_used_by_fifo = 0;break;- case AUDCFG_TYPE_HBR:
reg |= AUDCFG_TYPE_HBR << AUDCFG_TYPE_SHIFT;if (pdata->audout_layout == 1) {/* demuxed via AP0:AP3 */reg |= AUDCFG_HBR_DEMUX << AUDCFG_HBR_SHIFT;if (pdata->audout_format == AUDFMT_TYPE_SPDIF)sp_used_by_fifo = 0;} else {/* straight via AP0 */reg |= AUDCFG_HBR_STRAIGHT << AUDCFG_HBR_SHIFT;}break;- }
- if (pdata->audout_width == 32)
reg |= AUDCFG_I2SW_32 << AUDCFG_I2SW_SHIFT;- else
reg |= AUDCFG_I2SW_16 << AUDCFG_I2SW_SHIFT;- /* automatic hardware mute */
- if (pdata->audio_auto_mute)
reg |= AUDCFG_AUTO_MUTE_EN;- /* clock polarity */
- if (pdata->audout_invert_clk)
reg |= AUDCFG_CLK_INVERT;- io_write(sd, REG_AUDCFG, reg);
- /* audio layout */
- reg = (pdata->audout_layout) ? AUDIO_LAYOUT_LAYOUT1 : 0;
- if (!pdata->audout_layoutauto)
reg |= AUDIO_LAYOUT_MANUAL;- if (sp_used_by_fifo)
reg |= AUDIO_LAYOUT_SP_FLAG;- io_write(sd, REG_AUDIO_LAYOUT, reg);
- /* FIFO Latency value */
- io_write(sd, REG_FIFO_LATENCY_VAL, 0x80);
- /* Audio output port config */
- if (sp_used_by_fifo) {
reg = AUDIO_OUT_ENABLE_AP0;if (channel_assignment >= 0x01)reg |= AUDIO_OUT_ENABLE_AP1;if (channel_assignment >= 0x04)reg |= AUDIO_OUT_ENABLE_AP2;if (channel_assignment >= 0x0c)reg |= AUDIO_OUT_ENABLE_AP3;/* specific cases where AP1 is not used */if ((channel_assignment == 0x04)|| (channel_assignment == 0x08)|| (channel_assignment == 0x0c)|| (channel_assignment == 0x10)|| (channel_assignment == 0x14)|| (channel_assignment == 0x18)|| (channel_assignment == 0x1c))reg &= ~AUDIO_OUT_ENABLE_AP1;/* specific cases where AP2 is not used */if ((channel_assignment >= 0x14)&& (channel_assignment <= 0x17))reg &= ~AUDIO_OUT_ENABLE_AP2;- } else {
reg = AUDIO_OUT_ENABLE_AP3 |AUDIO_OUT_ENABLE_AP2 |AUDIO_OUT_ENABLE_AP1 |AUDIO_OUT_ENABLE_AP0;- }
- if (pdata->audout_format == AUDFMT_TYPE_I2S)
reg |= (AUDIO_OUT_ENABLE_ACLK | AUDIO_OUT_ENABLE_WS);- io_write(sd, REG_AUDIO_OUT_ENABLE, reg);
- /* reset test mode to normal audio freq auto selection */
- io_write(sd, REG_TEST_MODE, 0x00);
- return 0;
+}
+/* Soft Reset of specific hdmi info */ +static int +tda1997x_hdmi_info_reset(struct v4l2_subdev *sd, u8 info_rst, bool reset_sus) +{
- u8 reg;
- /* reset infoframe engine packets */
- reg = io_read(sd, REG_HDMI_INFO_RST);
- io_write(sd, REG_HDMI_INFO_RST, info_rst);
- /* if infoframe engine has been reset clear INT_FLG_MODE */
- if (reg & RESET_IF) {
reg = io_read(sd, REG_INT_FLG_CLR_MODE);io_write(sd, REG_INT_FLG_CLR_MODE, reg);- }
- /* Disable REFTIM to restart start-up-sequencer (SUS) */
- reg = io_read(sd, REG_RATE_CTRL);
- reg &= ~RATE_REFTIM_ENABLE;
- if (!reset_sus)
reg |= RATE_REFTIM_ENABLE;- reg = io_write(sd, REG_RATE_CTRL, reg);
- return 0;
+}
+static void +tda1997x_power_mode(struct tda1997x_state *state, bool enable) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg;
- if (enable) {
/* Automatic control of TMDS */io_write(sd, REG_PON_OVR_EN, PON_DIS);/* Enable current bias unit */io_write(sd, REG_CFG1, PON_EN);/* Enable deep color PLL */io_write(sd, REG_DEEP_PLL7_BYP, PON_DIS);/* Output buffers active */reg = io_read(sd, REG_OF);reg &= ~OF_VP_ENABLE;io_write(sd, REG_OF, reg);- } else {
/* Power down EDID mode sequence *//* Output buffers in HiZ */reg = io_read(sd, REG_OF);reg |= OF_VP_ENABLE;io_write(sd, REG_OF, reg);/* Disable deep color PLL */io_write(sd, REG_DEEP_PLL7_BYP, PON_EN);/* Disable current bias unit */io_write(sd, REG_CFG1, PON_DIS);/* Manual control of TMDS */io_write(sd, REG_PON_OVR_EN, PON_EN);- }
+}
+static bool +tda1997x_detect_tx_5v(struct v4l2_subdev *sd) +{
- u8 reg = io_read(sd, REG_DETECT_5V);
- return ((reg & DETECT_5V_SEL) ? 1 : 0);
+}
+static bool +tda1997x_detect_tx_hpd(struct v4l2_subdev *sd) +{
- u8 reg = io_read(sd, REG_DETECT_5V);
- return ((reg & DETECT_HPD) ? 1 : 0);
+}
+static int +tda1997x_detect_std(struct tda1997x_state *state) +{
- struct v4l2_subdev *sd = &state->sd;
- u32 vper;
- u16 hper;
- u16 hsper;
- int i;
- /*
* Read the FMT registers* REG_V_PER: Period of a frame (or two fields) in MCLK(27MHz) cycles* REG_H_PER: Period of a line in MCLK(27MHz) cycles* REG_HS_WIDTH: Period of horiz sync pulse in MCLK(27MHz) cycles*/- vper = io_read24(sd, REG_V_PER) & MASK_VPER;
- hper = io_read16(sd, REG_H_PER) & MASK_HPER;
- hsper = io_read16(sd, REG_HS_WIDTH) & MASK_HSWIDTH;
- if (!vper || !hper || !hsper)
return -ENOLINK;- v4l2_dbg(1, debug, sd, "Signal Timings: %u/%u/%u\n", vper, hper, hsper);
- /* look for matching timings */
- for (i = 0; i < ARRAY_SIZE(tda1997x_hdmi_modes); i++) {
const struct v4l2_bt_timings *bt = &tda1997x_hdmi_modes[i].bt;u32 lines, width, _hper, _hsper;u32 vmin, vmax, hmin, hmax, hsmin, hsmax;bool vmatch, hmatch, hsmatch;width = V4L2_DV_BT_FRAME_WIDTH(bt);lines = V4L2_DV_BT_FRAME_HEIGHT(bt);_hper = (u32)bt->pixelclock / width;if (bt->interlaced)lines /= 2;/* vper +/- 0.7% */vmin = ((27000000 / 1000) * 993) / _hper * lines;vmax = ((27000000 / 1000) * 1007) / _hper * lines;/* hper +/- 1.0% */hmin = ((27000000 / 100) * 99) / _hper;hmax = ((27000000 / 100) * 101) / _hper;/* hsper +/- 2 (take care to avoid 32bit overflow) */_hsper = 27000 * bt->hsync / ((u32)bt->pixelclock/1000);hsmin = _hsper - 2;hsmax = _hsper + 2;/* vmatch matches the framerate */vmatch = ((vper <= vmax) && (vper >= vmin)) ? 1 : 0;/* hmatch matches the width */hmatch = ((hper <= hmax) && (hper >= hmin)) ? 1 : 0;/* hsmatch matches the hswidth */hsmatch = ((hsper <= hsmax) && (hsper >= hsmin)) ? 1 : 0;if (hmatch && vmatch && hsmatch) {state->detected_timings = &tda1997x_hdmi_modes[i];v4l2_print_dv_timings(sd->name, "Detected format: ",state->detected_timings, false);return 0;}- }
- v4l_err(state->client, "no resolution match for timings: %d/%d/%d\n",
vper, hper, hsper);- return -EINVAL;
+}
+/* some sort of errata workaround for chip revision 0 (N1) */ +static void tda1997x_reset_n1(struct tda1997x_state *state) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg;
- /* clear HDMI mode flag in BCAPS */
- io_write(sd, REG_CLK_CFG, CLK_CFG_SEL_ACLK_EN | CLK_CFG_SEL_ACLK);
- io_write(sd, REG_PON_OVR_EN, PON_EN);
- io_write(sd, REG_PON_CBIAS, PON_EN);
- io_write(sd, REG_PON_PLL, PON_EN);
- reg = io_read(sd, REG_MODE_REC_CFG1);
- reg &= ~0x06;
- reg |= 0x02;
- io_write(sd, REG_MODE_REC_CFG1, reg);
- io_write(sd, REG_CLK_CFG, CLK_CFG_DIS);
- io_write(sd, REG_PON_OVR_EN, PON_DIS);
- reg = io_read(sd, REG_MODE_REC_CFG1);
- reg &= ~0x06;
- io_write(sd, REG_MODE_REC_CFG1, reg);
+}
+/*
- Activity detection must only be notified when stable_clk_x AND active_x
- bits are set to 1. If only stable_clk_x bit is set to 1 but not
- active_x, it means that the TMDS clock is not in the defined range
- and activity detection must not be notified.
- */
+static u8 +tda1997x_read_activity_status_regs(struct v4l2_subdev *sd) +{
- u8 reg, status = 0;
- /* Read CLK_A_STATUS register */
- reg = io_read(sd, REG_CLK_A_STATUS);
- /* when stable_clk_x is set to 1, check active_x bit */
- if ((reg & MASK_CLK_STABLE) && !(reg & MASK_CLK_ACTIVE))
reg &= ~MASK_CLK_STABLE;- status |= ((reg & MASK_CLK_STABLE) >> 2);
- /* Read CLK_B_STATUS register */
- reg = io_read(sd, REG_CLK_B_STATUS);
- /* when stable_clk_x is set to 1, check active_x bit */
- if ((reg & MASK_CLK_STABLE) && !(reg & MASK_CLK_ACTIVE))
reg &= ~MASK_CLK_STABLE;- status |= ((reg & MASK_CLK_STABLE) >> 1);
- /* Read the SUS_STATUS register */
- reg = io_read(sd, REG_SUS_STATUS);
- /* If state = 5 => TMDS is locked */
- if ((reg & MASK_SUS_STATUS) == LAST_STATE_REACHED)
status |= MASK_SUS_STATE;- else
status &= ~MASK_SUS_STATE;- return status;
+}
+/* parse an infoframe and do some sanity checks on it */ +static unsigned int +tda1997x_parse_infoframe(struct tda1997x_state *state, u16 addr) +{
- struct v4l2_subdev *sd = &state->sd;
- union hdmi_infoframe frame;
- u8 buffer[40];
- u8 reg;
- int len, err;
- /* read data */
- len = io_readn(sd, addr, sizeof(buffer), buffer);
- err = hdmi_infoframe_unpack(&frame, buffer);
- if (err) {
v4l_err(state->client,"failed parsing %d byte infoframe: 0x%04x/0x%02x\n",len, addr, buffer[0]);return err;- }
- hdmi_infoframe_log(KERN_INFO, &state->client->dev, &frame);
- switch (frame.any.type) {
- /* Audio InfoFrame: see HDMI spec 8.2.2 */
- case HDMI_INFOFRAME_TYPE_AUDIO:
/* sample rate */switch (frame.audio.sample_frequency) {case HDMI_AUDIO_SAMPLE_FREQUENCY_32000:state->audio_samplerate = 32000;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_44100:state->audio_samplerate = 44100;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_48000:state->audio_samplerate = 48000;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_88200:state->audio_samplerate = 88200;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_96000:state->audio_samplerate = 96000;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_176400:state->audio_samplerate = 176400;break;case HDMI_AUDIO_SAMPLE_FREQUENCY_192000:state->audio_samplerate = 192000;break;default:case HDMI_AUDIO_SAMPLE_FREQUENCY_STREAM:break;}/* sample size */switch (frame.audio.sample_size) {case HDMI_AUDIO_SAMPLE_SIZE_16:state->audio_samplesize = 16;break;case HDMI_AUDIO_SAMPLE_SIZE_20:state->audio_samplesize = 20;break;case HDMI_AUDIO_SAMPLE_SIZE_24:state->audio_samplesize = 24;break;case HDMI_AUDIO_SAMPLE_SIZE_STREAM:default:break;}/* Channel Count */state->audio_channels = frame.audio.channels;if (frame.audio.channel_allocation &&frame.audio.channel_allocation != state->audio_ch_alloc) {/* use the channel assignment from the infoframe */state->audio_ch_alloc = frame.audio.channel_allocation;tda1997x_configure_audout(sd, state->audio_ch_alloc);/* reset the audio FIFO */tda1997x_hdmi_info_reset(sd, RESET_AUDIO, false);}break;- /* Auxiliary Video information (AVI) InfoFrame: see HDMI spec 8.2.1 */
- case HDMI_INFOFRAME_TYPE_AVI:
state->colorspace = frame.avi.colorspace;state->colorimetry = frame.avi.colorimetry;state->range = frame.avi.quantization_range;
This should be ignored if it is overridden by the RGB Quantization Range control, or am I missing something?
state->content = frame.avi.content_type;/** If colorimetry not specified, conversion depends on res type:* - SDTV: ITU601 for SD (480/576/240/288 line resolution)* - HDTV: ITU709 for HD (720/1080 line resolution)* - PC: sRGB* see HDMI specification section 6.7*/if ((state->colorspace == HDMI_COLORSPACE_YUV422 ||state->colorspace == HDMI_COLORSPACE_YUV444) &&(state->colorimetry == HDMI_COLORIMETRY_EXTENDED ||state->colorimetry == HDMI_COLORIMETRY_NONE)) {switch (state->timings.bt.height) {case 480:case 576:case 240:case 288:state->colorimetry = HDMI_COLORIMETRY_ITU_601;break;case 720:case 1080:state->colorimetry = HDMI_COLORIMETRY_ITU_709;break;default:state->colorimetry = HDMI_COLORIMETRY_NONE;break;}}/* if range not specified */if (state->range == HDMI_QUANTIZATION_RANGE_DEFAULT) {if (frame.avi.video_code == 0)
This should be:
if (frame.avi.video_code <= 1)
VIC code 1 (VGA) is also full range. It's an exception to the rule.
state->range = HDMI_QUANTIZATION_RANGE_FULL;elsestate->range = HDMI_QUANTIZATION_RANGE_LIMITED;}v4l_dbg(1, debug, state->client,"colorspace=%d colorimetry=%d range=%d content=%d\n",state->colorspace, state->colorimetry, state->range,state->content);/* configure upsampler: 0=bypass 1=repeatchroma 2=interpolate */reg = io_read(sd, REG_PIX_REPEAT);reg &= ~PIX_REPEAT_MASK_UP_SEL;if (state->colorspace == HDMI_COLORSPACE_YUV422)reg |= (PIX_REPEAT_CHROMA << PIX_REPEAT_SHIFT);io_write(sd, REG_PIX_REPEAT, reg);/* ConfigurePixelRepeater: repeat n-times each pixel */reg = io_read(sd, REG_PIX_REPEAT);reg &= ~PIX_REPEAT_MASK_REP;reg |= frame.avi.pixel_repeat;io_write(sd, REG_PIX_REPEAT, reg);/* configure the receiver with the new colorspace */tda1997x_configure_csc(sd);break;- default:
break;- }
- return 0;
+}
+static void tda1997x_irq_sus(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg, source;
- source = io_read(sd, REG_INT_FLG_CLR_SUS);
- io_write(sd, REG_INT_FLG_CLR_SUS, source);
- if (source & MASK_MPT) {
/* reset MTP in use flag if set */if (state->mptrw_in_progress)state->mptrw_in_progress = 0;- }
- if (source & MASK_SUS_END) {
/* reset audio FIFO */reg = io_read(sd, REG_HDMI_INFO_RST);reg |= MASK_SR_FIFO_FIFO_CTRL;io_write(sd, REG_HDMI_INFO_RST, reg);reg &= ~MASK_SR_FIFO_FIFO_CTRL;io_write(sd, REG_HDMI_INFO_RST, reg);/* reset HDMI flags */state->hdmi_status = 0;- }
- /* filter FMT interrupt based on SUS state */
- reg = io_read(sd, REG_SUS_STATUS);
- if (((reg & MASK_SUS_STATUS) != LAST_STATE_REACHED)
|| (source & MASK_MPT)) {source &= ~MASK_FMT;- }
- if (source & (MASK_FMT | MASK_SUS_END)) {
reg = io_read(sd, REG_SUS_STATUS);if ((reg & MASK_SUS_STATUS) != LAST_STATE_REACHED) {v4l_err(state->client, "BAD SUS STATUS\n");return;}/* There is new activity, the status for HDCP repeater state */state->state_c5_reached = 0;/* Detect the new resolution */if (!tda1997x_detect_std(state))v4l2_subdev_notify_event(&state->sd, &tda1997x_ev_fmt);- }
+}
+static void tda1997x_irq_ddc(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 source;
- source = io_read(sd, REG_INT_FLG_CLR_DDC);
- io_write(sd, REG_INT_FLG_CLR_DDC, source);
- if (source & MASK_EDID_MTP) {
/* reset MTP in use flag if set */if (state->mptrw_in_progress)state->mptrw_in_progress = 0;- }
- /* Detection of +5V */
- if (source & MASK_DET_5V) {
v4l2_ctrl_s_ctrl(state->detect_tx_5v_ctrl,tda1997x_detect_tx_5v(sd));- }
+}
+static void tda1997x_irq_rate(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg, source;
- u8 irq_status, last_irq_status;
- source = io_read(sd, REG_INT_FLG_CLR_RATE);
- io_write(sd, REG_INT_FLG_CLR_RATE, source);
- /* read status regs */
- last_irq_status = irq_status = tda1997x_read_activity_status_regs(sd);
- /*
* read clock status reg until INT_FLG_CLR_RATE is still 0* after the read to make sure its the last one*/- reg = source;
- while (reg != 0) {
irq_status = tda1997x_read_activity_status_regs(sd);reg = io_read(sd, REG_INT_FLG_CLR_RATE);io_write(sd, REG_INT_FLG_CLR_RATE, reg);source |= reg;- }
- /* we only pay attention to stability change events */
- if (source & (MASK_RATE_A_ST | MASK_RATE_B_ST)) {
int input = (source & MASK_RATE_A_ST)?0:1;u8 mask = 1<<input;/* state change */if ((irq_status & mask) != (state->activity_status & mask)) {/* activity lost */if ((irq_status & mask) == 0) {v4l_info(state->client,"HDMI-%c: Digital Activity Lost\n",input+'A');/* bypass up/down sampler and pixel repeater */reg = io_read(sd, REG_PIX_REPEAT);reg &= ~PIX_REPEAT_MASK_UP_SEL;reg &= ~PIX_REPEAT_MASK_REP;io_write(sd, REG_PIX_REPEAT, reg);if (state->chip_revision == 0)tda1997x_reset_n1(state);state->detected_timings = NULL;state->input_detect[input] = 0;v4l2_subdev_notify_event(sd, &tda1997x_ev_fmt);}/* activity detected */else {v4l_info(state->client,"HDMI-%c: Digital Activity Detected\n",input+'A');state->input_detect[input] = 1;}/* hold onto current state */state->activity_status = (irq_status & mask);}- }
+}
+static void tda1997x_irq_info(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 source;
- source = io_read(sd, REG_INT_FLG_CLR_INFO);
- io_write(sd, REG_INT_FLG_CLR_INFO, source);
- /* Audio infoframe */
- if (source & MASK_AUD_IF) {
tda1997x_parse_infoframe(state, AUD_IF);source &= ~MASK_AUD_IF;- }
- /* Source Product Descriptor infoframe change */
- if (source & MASK_SPD_IF) {
tda1997x_parse_infoframe(state, SPD_IF);source &= ~MASK_SPD_IF;- }
- /* Auxiliary Video Information infoframe */
- if (source & MASK_AVI_IF) {
tda1997x_parse_infoframe(state, AVI_IF);source &= ~MASK_AVI_IF;- }
+}
+static void tda1997x_irq_audio(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg, source;
- source = io_read(sd, REG_INT_FLG_CLR_AUDIO);
- io_write(sd, REG_INT_FLG_CLR_AUDIO, source);
- /* reset audio FIFO on FIFO pointer error or audio mute */
- if (source & MASK_ERROR_FIFO_PT ||
source & MASK_MUTE_FLG) {/* audio reset audio FIFO */reg = io_read(sd, REG_SUS_STATUS);if ((reg & MASK_SUS_STATUS) == LAST_STATE_REACHED) {reg = io_read(sd, REG_HDMI_INFO_RST);reg |= MASK_SR_FIFO_FIFO_CTRL;io_write(sd, REG_HDMI_INFO_RST, reg);reg &= ~MASK_SR_FIFO_FIFO_CTRL;io_write(sd, REG_HDMI_INFO_RST, reg);/* reset channel status IT if present */source &= ~(MASK_CH_STATE);}- }
- if (source & MASK_AUDIO_FREQ_FLG) {
static const int freq[] = {0, 32000, 44100, 48000, 88200, 96000, 176400, 192000};reg = io_read(sd, REG_AUDIO_FREQ);state->audio_samplerate = freq[reg & 7];v4l_info(state->client, "Audio Frequency Change: %dHz\n",state->audio_samplerate);- }
- if (source & MASK_AUDIO_FLG) {
reg = io_read(sd, REG_AUDIO_FLAGS);if (reg & BIT(AUDCFG_TYPE_DST))state->audio_type = AUDCFG_TYPE_DST;if (reg & BIT(AUDCFG_TYPE_OBA))state->audio_type = AUDCFG_TYPE_OBA;if (reg & BIT(AUDCFG_TYPE_HBR))state->audio_type = AUDCFG_TYPE_HBR;if (reg & BIT(AUDCFG_TYPE_PCM))state->audio_type = AUDCFG_TYPE_PCM;v4l_info(state->client, "Audio Type: %s\n",audtype_names[state->audio_type]);- }
+}
+static void tda1997x_irq_hdcp(struct tda1997x_state *state, u8 *flags) +{
- struct v4l2_subdev *sd = &state->sd;
- u8 reg, source;
- source = io_read(sd, REG_INT_FLG_CLR_HDCP);
- io_write(sd, REG_INT_FLG_CLR_HDCP, source);
- /* reset MTP in use flag if set */
- if (source & MASK_HDCP_MTP)
state->mptrw_in_progress = 0;- if (source & MASK_STATE_C5) {
/* REPEATER: mask AUDIO and IF irqs to avoid IF during auth */reg = io_read(sd, REG_INT_MASK_TOP);reg &= ~(INTERRUPT_AUDIO | INTERRUPT_INFO);io_write(sd, REG_INT_MASK_TOP, reg);*flags &= (INTERRUPT_AUDIO | INTERRUPT_INFO);- }
+}
+static irqreturn_t tda1997x_isr_thread(int irq, void *d) +{
- struct tda1997x_state *state = d;
- struct v4l2_subdev *sd = &state->sd;
- u8 flags;
- mutex_lock(&state->lock);
- do {
/* read interrupt flags */flags = io_read(sd, REG_INT_FLG_CLR_TOP);if (flags == 0)break;/* SUS interrupt source (Input activity events) */if (flags & INTERRUPT_SUS)tda1997x_irq_sus(state, &flags);/* DDC interrupt source (Display Data Channel) */else if (flags & INTERRUPT_DDC)tda1997x_irq_ddc(state, &flags);/* RATE interrupt source (Digital Input activity) */else if (flags & INTERRUPT_RATE)tda1997x_irq_rate(state, &flags);/* Infoframe change interrupt */else if (flags & INTERRUPT_INFO)tda1997x_irq_info(state, &flags);/* Audio interrupt source:* freq change, DST,OBA,HBR,ASP flags, mute, FIFO err*/else if (flags & INTERRUPT_AUDIO)tda1997x_irq_audio(state, &flags);/* HDCP interrupt source (content protection) */if (flags & INTERRUPT_HDCP)tda1997x_irq_hdcp(state, &flags);- } while (flags != 0);
- mutex_unlock(&state->lock);
- return IRQ_HANDLED;
+}
+static bool tda1997x_check_dv_timings(const struct v4l2_dv_timings *timings,
void *hdl)+{
- unsigned int i;
- for (i = 0; i < ARRAY_SIZE(tda1997x_hdmi_modes); i++) {
if (v4l2_match_dv_timings(timings, &tda1997x_hdmi_modes[i],0, false))return true;- }
- return false;
+}
+/* -----------------------------------------------------------------------------
- v4l2_subdev_video_ops
- */
+static int +tda1997x_g_input_status(struct v4l2_subdev *sd, u32 *status) +{
- struct tda1997x_state *state = to_state(sd);
- mutex_lock(&state->lock);
- if (state->detected_timings)
*status = 0;- else
*status |= V4L2_IN_ST_NO_SIGNAL;- mutex_unlock(&state->lock);
- return 0;
+};
+static int tda1997x_s_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)+{
- struct tda1997x_state *state = to_state(sd);
- int ret;
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- if (!timings)
return -EINVAL;- if (v4l2_match_dv_timings(&state->timings, timings, 0, false))
return 0; /* no changes */- if (!v4l2_valid_dv_timings(timings, &tda1997x_dv_timings_cap,
tda1997x_check_dv_timings, state))return -ERANGE;- mutex_lock(&state->lock);
- state->timings = *timings;
- /* setup frame detection window and VHREF timing generator */
- ret = tda1997x_configure_vhref(sd);
- if (ret)
goto error;- /* configure colorspace conversion */
- ret = tda1997x_configure_csc(sd);
- if (ret)
goto error;- mutex_unlock(&state->lock);
- return 0;
+error:
- mutex_unlock(&state->lock);
- return ret;
+}
+static int tda1997x_g_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)+{
- struct tda1997x_state *state = to_state(sd);
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- if (!timings)
return -EINVAL;- mutex_lock(&state->lock);
- *timings = state->timings;
- mutex_unlock(&state->lock);
- return 0;
+}
+static int tda1997x_query_dv_timings(struct v4l2_subdev *sd,
struct v4l2_dv_timings *timings)+{
- struct tda1997x_state *state = to_state(sd);
- int ret;
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- if (!timings)
return -EINVAL;- memset(timings, 0, sizeof(struct v4l2_dv_timings));
- mutex_lock(&state->lock);
- ret = tda1997x_detect_std(state);
- if (!ret)
*timings = *state->detected_timings;- mutex_unlock(&state->lock);
- return ret;
+}
+static int tda1997x_s_stream(struct v4l2_subdev *sd, int enable) +{
- struct tda1997x_state *state = to_state(sd);
- v4l_dbg(1, debug, state->client, "%s %d\n", __func__, enable);
- mutex_lock(&state->lock);
- if (!state->detected_timings)
v4l_dbg(1, debug, state->client, "Invalid HDMI signal\n");- mutex_unlock(&state->lock);
- return 0;
+}
+static const struct v4l2_subdev_video_ops tda1997x_video_ops = {
- .g_input_status = tda1997x_g_input_status,
- .s_dv_timings = tda1997x_s_dv_timings,
- .g_dv_timings = tda1997x_g_dv_timings,
- .query_dv_timings = tda1997x_query_dv_timings,
- .s_stream = tda1997x_s_stream,
+};
+/* -----------------------------------------------------------------------------
- v4l2_subdev_pad_ops
- */
+static int tda1997x_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,struct v4l2_subdev_mbus_code_enum *code)+{
- struct tda1997x_state *state = to_state(sd);
- if (code->index > 0)
return -EINVAL;- code->code = state->code;
- return 0;
+}
+static int tda1997x_fill_format(struct tda1997x_state *state,
struct v4l2_mbus_framefmt *format)+{
- const struct v4l2_bt_timings *bt;
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- if (!state->detected_timings)
return -EINVAL;- bt = &state->detected_timings->bt;
- memset(format, 0, sizeof(*format));
- format->width = bt->width;
- format->height = bt->height;
- format->field = V4L2_FIELD_NONE;
- format->colorspace = V4L2_COLORSPACE_SRGB;
- if (bt->flags & V4L2_DV_FL_IS_CE_VIDEO)
format->colorspace = (bt->height <= 576) ?V4L2_COLORSPACE_SMPTE170M : V4L2_COLORSPACE_REC709;- return 0;
+}
+static int tda1997x_get_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,struct v4l2_subdev_format *format)+{
- struct tda1997x_state *state = to_state(sd);
- v4l_dbg(1, debug, state->client, "%s\n", __func__);
- if (format->pad != TDA1997X_PAD_SOURCE)
return -EINVAL;- tda1997x_fill_format(state, &format->format);
- if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
struct v4l2_mbus_framefmt *fmt;fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);format->format.code = format->format.code;- } else
format->format.code = state->code;- return 0;
+}
+static int tda1997x_set_pad_format(struct v4l2_subdev *sd,
struct v4l2_subdev_pad_config *cfg,struct v4l2_subdev_format *format)+{
- struct v4l2_mbus_framefmt *fmt;
- if (format->pad != TDA1997X_PAD_SOURCE)
return -EINVAL;- if (format->which == V4L2_SUBDEV_FORMAT_ACTIVE)
return tda1997x_get_pad_format(sd, cfg, format);- fmt = v4l2_subdev_get_try_format(sd, cfg, format->pad);
- *fmt = format->format;
- return 0;
+}
+static int tda1997x_get_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) +{
- struct tda1997x_state *state = to_state(sd);
- v4l_dbg(1, debug, state->client, "%s pad=%d\n", __func__, edid->pad);
- memset(edid->reserved, 0, sizeof(edid->reserved));
- if (!state->edid.present)
return -ENODATA;- if (edid->start_block == 0 && edid->blocks == 0) {
edid->blocks = state->edid.blocks;return 0;- }
- if (edid->start_block >= state->edid.blocks)
return -EINVAL;- if (edid->start_block + edid->blocks > state->edid.blocks)
edid->blocks = state->edid.blocks - edid->start_block;- memcpy(edid->edid, state->edid.edid + edid->start_block * 128,
edid->blocks * 128);- return 0;
+}
+static int tda1997x_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) +{
- struct tda1997x_state *state = to_state(sd);
- int i;
- v4l_dbg(1, debug, state->client, "%s pad=%d\n", __func__, edid->pad);
- memset(edid->reserved, 0, sizeof(edid->reserved));
- if (edid->start_block != 0)
return -EINVAL;- if (edid->blocks == 0) {
state->edid.blocks = 0;state->edid.present = 0;tda1997x_disable_edid(sd);return 0;- }
- if (edid->blocks > 2) {
edid->blocks = 2;return -E2BIG;- }
- tda1997x_disable_edid(sd);
- /* write base EDID */
- for (i = 0; i < 128; i++)
io_write(sd, REG_EDID_IN_BYTE0 + i, edid->edid[i]);- /* write CEA Extension */
- for (i = 0; i < 128; i++)
io_write(sd, REG_EDID_IN_BYTE128 + i, edid->edid[i+128]);- tda1997x_enable_edid(sd);
- return 0;
+}
+static int tda1997x_get_dv_timings_cap(struct v4l2_subdev *sd,
struct v4l2_dv_timings_cap *cap)+{
- *cap = tda1997x_dv_timings_cap;
- return 0;
+}
+static int tda1997x_enum_dv_timings(struct v4l2_subdev *sd,
struct v4l2_enum_dv_timings *timings)+{
- struct tda1997x_state *state = to_state(sd);
- return v4l2_enum_dv_timings_cap(timings, &tda1997x_dv_timings_cap,
tda1997x_check_dv_timings, state);+}
+static const struct v4l2_subdev_pad_ops tda1997x_pad_ops = {
- .enum_mbus_code = tda1997x_enum_mbus_code,
- .get_fmt = tda1997x_get_pad_format,
- .set_fmt = tda1997x_set_pad_format,
- .get_edid = tda1997x_get_edid,
- .set_edid = tda1997x_set_edid,
- .dv_timings_cap = tda1997x_get_dv_timings_cap,
- .enum_dv_timings = tda1997x_enum_dv_timings,
+};
+/* -----------------------------------------------------------------------------
- v4l2_subdev_core_ops
- */
+static int tda1997x_log_infoframe(struct v4l2_subdev *sd, int addr) +{
- struct tda1997x_state *state = to_state(sd);
- union hdmi_infoframe frame;
- u8 buffer[40];
- int len, err;
- /* read data */
- len = io_readn(sd, addr, sizeof(buffer), buffer);
- v4l2_dbg(1, debug, sd, "infoframe: addr=%d len=%d\n", addr, len);
- err = hdmi_infoframe_unpack(&frame, buffer);
- if (err) {
v4l_err(state->client,"failed parsing %d byte infoframe: 0x%04x/0x%02x\n",len, addr, buffer[0]);return err;- }
- hdmi_infoframe_log(KERN_INFO, &state->client->dev, &frame);
- return 0;
+}
+static int tda1997x_log_status(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- struct v4l2_dv_timings timings;
- static const char * const colorspace[] = {
"RGB", "YUV422", "YUV444", "YUV420", "", "", "", "",- };
- static const char * const colorimetry[] = {
"", "ITU601", "ITU709", "Extended",- };
- static const char * const rgb_quantization_range_txt[] = {
"Automatic","limited range (16-235)","full range (0-255)",- };
- v4l2_info(sd, "-----Chip status-----\n");
- v4l2_info(sd, "Chip: %s N%d\n", state->info->name,
state->chip_revision + 1);- v4l2_info(sd, "EDID Enabled: %s\n", state->edid.present ? "yes" : "no");
- v4l2_info(sd, "-----Signal status-----\n");
- v4l2_info(sd, "Cable detected (+5V power): %s\n",
tda1997x_detect_tx_5v(sd) ? "yes" : "no");- v4l2_info(sd, "HPD detected: %s\n",
tda1997x_detect_tx_hpd(sd) ? "yes" : "no");- v4l2_info(sd, "-----Video Timings-----\n");
- if (tda1997x_query_dv_timings(sd, &timings))
v4l2_info(sd, "No video detected\n");- else
v4l2_print_dv_timings(sd->name, "Detected format: ",&timings, true);- v4l2_print_dv_timings(sd->name, "Configured format: ",
&state->timings, true);- v4l2_info(sd, "-----Color space-----\n");
- v4l2_info(sd, "Input color space: %s %s %s",
colorspace[state->colorspace],(state->colorspace == HDMI_COLORSPACE_RGB) ? "" :colorimetry[state->colorimetry],rgb_quantization_range_txt[state->range]);- v4l2_info(sd, "Output color space: %s",
vidfmt_names[state->vid_fmt]);- v4l2_info(sd, "Color space conversion: %s", state->conv ?
state->conv->name : "None");- v4l2_info(sd, "-----Audio-----\n");
- if (state->audio_channels) {
v4l2_info(sd, "audio: %dch %dHz\n", state->audio_channels,state->audio_samplerate);- } else {
v4l2_info(sd, "audio: none\n");- }
- v4l2_info(sd, "-----Infoframes-----\n");
- tda1997x_log_infoframe(sd, AUD_IF);
- tda1997x_log_infoframe(sd, SPD_IF);
- tda1997x_log_infoframe(sd, AVI_IF);
- return 0;
+}
+static int tda1997x_subscribe_event(struct v4l2_subdev *sd,
struct v4l2_fh *fh,struct v4l2_event_subscription *sub)+{
- switch (sub->type) {
- case V4L2_EVENT_SOURCE_CHANGE:
return v4l2_src_change_event_subdev_subscribe(sd, fh, sub);- case V4L2_EVENT_CTRL:
return v4l2_ctrl_subdev_subscribe_event(sd, fh, sub);- default:
return -EINVAL;- }
+}
+static const struct v4l2_subdev_core_ops tda1997x_core_ops = {
- .log_status = tda1997x_log_status,
- .subscribe_event = tda1997x_subscribe_event,
- .unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+/* -----------------------------------------------------------------------------
- v4l2_subdev_ops
- */
+static const struct v4l2_subdev_ops tda1997x_subdev_ops = {
- .core = &tda1997x_core_ops,
- .video = &tda1997x_video_ops,
- .pad = &tda1997x_pad_ops,
+};
+/* -----------------------------------------------------------------------------
- v4l2_controls
- */
+static int tda1997x_s_ctrl(struct v4l2_ctrl *ctrl) +{
- struct v4l2_subdev *sd = to_sd(ctrl);
- struct tda1997x_state *state = to_state(sd);
- switch (ctrl->id) {
- /* allow overriding the default RGB quantization range */
- case V4L2_CID_DV_RX_RGB_RANGE:
state->range = ctrl->val;tda1997x_configure_csc(sd);return 0;- }
- return -EINVAL;
+};
+static int tda1997x_g_volatile_ctrl(struct v4l2_ctrl *ctrl) +{
- struct v4l2_subdev *sd = to_sd(ctrl);
- struct tda1997x_state *state = to_state(sd);
- if (ctrl->id == V4L2_CID_DV_RX_IT_CONTENT_TYPE) {
ctrl->val = state->content;return 0;- }
- return -EINVAL;
+};
+static const struct v4l2_ctrl_ops tda1997x_ctrl_ops = {
- .s_ctrl = tda1997x_s_ctrl,
- .g_volatile_ctrl = tda1997x_g_volatile_ctrl,
+};
+static int tda1997x_core_init(struct v4l2_subdev *sd) +{
- struct tda1997x_state *state = to_state(sd);
- struct tda1997x_platform_data *pdata = &state->pdata;
- u8 reg;
- int i;
- /* disable HPD */
- io_write(sd, REG_HPD_AUTO_CTRL, HPD_AUTO_HPD_UNSEL);
- if (state->chip_revision == 0) {
io_write(sd, REG_MAN_SUS_HDMI_SEL, MAN_DIS_HDCP | MAN_RST_HDCP);io_write(sd, REG_CGU_DBG_SEL, 1 << CGU_DBG_CLK_SEL_SHIFT);- }
- /* reset infoframe at end of start-up-sequencer */
- io_write(sd, REG_SUS_SET_RGB2, 0x06);
- io_write(sd, REG_SUS_SET_RGB3, 0x06);
- /* Enable TMDS pull-ups */
- io_write(sd, REG_RT_MAN_CTRL, RT_MAN_CTRL_RT |
RT_MAN_CTRL_RT_B | RT_MAN_CTRL_RT_A);- /* enable sync measurement timing */
- tda1997x_cec_write(sd, REG_PWR_CONTROL & 0xff, 0x04);
- /* adjust CEC clock divider */
- tda1997x_cec_write(sd, REG_OSC_DIVIDER & 0xff, 0x03);
- tda1997x_cec_write(sd, REG_EN_OSC_PERIOD_LSB & 0xff, 0xa0);
- io_write(sd, REG_TIMER_D, 0x54);
- /* enable power switch */
- reg = tda1997x_cec_read(sd, REG_CONTROL & 0xff);
- reg |= 0x20;
- tda1997x_cec_write(sd, REG_CONTROL & 0xff, reg);
- mdelay(50);
- /* read the chip version */
- reg = io_read(sd, REG_VERSION);
- /* get the chip configuration */
- reg = io_read(sd, REG_CMTP_REG10);
- /* enable interrupts we care about */
- io_write(sd, REG_INT_MASK_TOP,
INTERRUPT_HDCP | INTERRUPT_AUDIO | INTERRUPT_INFO |INTERRUPT_RATE | INTERRUPT_SUS);- /* config_mtp,fmt,sus_end,sus_st */
- io_write(sd, REG_INT_MASK_SUS, MASK_MPT | MASK_FMT | MASK_SUS_END);
- /* rate stability change for inputs A/B */
- io_write(sd, REG_INT_MASK_RATE, MASK_RATE_B_ST | MASK_RATE_A_ST);
- /* aud,spd,avi*/
- io_write(sd, REG_INT_MASK_INFO,
MASK_AUD_IF | MASK_SPD_IF | MASK_AVI_IF);- /* audio_freq,audio_flg,mute_flg,fifo_err */
- io_write(sd, REG_INT_MASK_AUDIO,
MASK_AUDIO_FREQ_FLG | MASK_AUDIO_FLG | MASK_MUTE_FLG |MASK_ERROR_FIFO_PT);- /* HDCP C5 state reached */
- io_write(sd, REG_INT_MASK_HDCP, MASK_STATE_C5);
- /* 5V detect and HDP pulse end */
- io_write(sd, REG_INT_MASK_DDC, MASK_DET_5V);
- /* don't care about AFE/MODE */
- io_write(sd, REG_INT_MASK_AFE, 0);
- io_write(sd, REG_INT_MASK_MODE, 0);
- /* clear all interrupts */
- io_write(sd, REG_INT_FLG_CLR_TOP, 0xff);
- io_write(sd, REG_INT_FLG_CLR_SUS, 0xff);
- io_write(sd, REG_INT_FLG_CLR_DDC, 0xff);
- io_write(sd, REG_INT_FLG_CLR_RATE, 0xff);
- io_write(sd, REG_INT_FLG_CLR_MODE, 0xff);
- io_write(sd, REG_INT_FLG_CLR_INFO, 0xff);
- io_write(sd, REG_INT_FLG_CLR_AUDIO, 0xff);
- io_write(sd, REG_INT_FLG_CLR_HDCP, 0xff);
- io_write(sd, REG_INT_FLG_CLR_AFE, 0xff);
- /* init TMDS equalizer */
- if (state->chip_revision == 0)
io_write(sd, REG_CGU_DBG_SEL, 1 << CGU_DBG_CLK_SEL_SHIFT);- io_write24(sd, REG_CLK_MIN_RATE, CLK_MIN_RATE);
- io_write24(sd, REG_CLK_MAX_RATE, CLK_MAX_RATE);
- if (state->chip_revision == 0)
io_write(sd, REG_WDL_CFG, WDL_CFG_VAL);- /* DC filter */
- io_write(sd, REG_DEEP_COLOR_CTRL, DC_FILTER_VAL);
- /* disable test pattern */
- io_write(sd, REG_SVC_MODE, 0x00);
- /* update HDMI INFO CTRL */
- io_write(sd, REG_INFO_CTRL, 0xff);
- /* write HDMI INFO EXCEED value */
- io_write(sd, REG_INFO_EXCEED, 3);
- if (state->chip_revision == 0)
tda1997x_reset_n1(state);- /*
* No HDCP acknowledge when HDCP is disabled* and reset SUS to force format detection*/- tda1997x_hdmi_info_reset(sd, NACK_HDCP, true);
- /* Set HPD low */
- tda1997x_manual_hpd(sd, HPD_LOW_BP);
- /* Configure receiver capabilities */
- io_write(sd, REG_HDCP_BCAPS, HDCP_HDMI | HDCP_FAST_REAUTH);
- /* Configure HDMI: Auto HDCP mode, packet controlled mute */
- reg = HDMI_CTRL_MUTE_AUTO << HDMI_CTRL_MUTE_SHIFT;
- reg |= HDMI_CTRL_HDCP_AUTO << HDMI_CTRL_HDCP_SHIFT;
- io_write(sd, REG_HDMI_CTRL, reg);
- /* reset start-up-sequencer to force format detection */
- tda1997x_hdmi_info_reset(sd, 0, true);
- /* disable matrix conversion */
- reg = io_read(sd, REG_VDP_CTRL);
- reg |= VDP_CTRL_MATRIX_BP;
- io_write(sd, REG_VDP_CTRL, reg);
- /* set video output mode */
- tda1997x_configure_vidout(state);
- /* configure video output port */
- for (i = 0; i < 9; i++) {
v4l_dbg(1, debug, state->client, "vidout_cfg[%d]=0x%02x\n", i,pdata->vidout_port_cfg[i]);io_write(sd, REG_VP35_32_CTRL + i, pdata->vidout_port_cfg[i]);- }
- /* configure audio output port */
- tda1997x_configure_audout(sd, 0);
- /* configure audio clock freq */
- switch (pdata->audout_mclk_fs) {
- case 512:
reg = AUDIO_CLOCK_SEL_512FS;break;- case 256:
reg = AUDIO_CLOCK_SEL_256FS;break;- case 128:
reg = AUDIO_CLOCK_SEL_128FS;break;- case 64:
reg = AUDIO_CLOCK_SEL_64FS;break;- case 32:
reg = AUDIO_CLOCK_SEL_32FS;break;- default:
reg = AUDIO_CLOCK_SEL_16FS;break;- }
- io_write(sd, REG_AUDIO_CLOCK, reg);
- /* reset advanced infoframes (ISRC1/ISRC2/ACP) */
- tda1997x_hdmi_info_reset(sd, RESET_AI, false);
- /* reset infoframe */
- tda1997x_hdmi_info_reset(sd, RESET_IF, false);
- /* reset audio infoframes */
- tda1997x_hdmi_info_reset(sd, RESET_AUDIO, false);
- /* reset gamut */
- tda1997x_hdmi_info_reset(sd, RESET_GAMUT, false);
- /* get initial HDMI status */
- state->hdmi_status = io_read(sd, REG_HDMI_FLAGS);
- return 0;
+}
+static int tda1997x_set_power(struct tda1997x_state *state, bool on) +{
- int ret = 0;
- if (on) {
ret = regulator_bulk_enable(TDA1997X_NUM_SUPPLIES,state->supplies);msleep(300);- }
- ret = regulator_bulk_disable(TDA1997X_NUM_SUPPLIES,
state->supplies);- return ret;
+}
+static const struct i2c_device_id tda1997x_i2c_id[] = {
- {"tda19971", (kernel_ulong_t)&tda1997x_chip_info[TDA19971]},
- {"tda19973", (kernel_ulong_t)&tda1997x_chip_info[TDA19973]},
- { },
+}; +MODULE_DEVICE_TABLE(i2c, tda1997x_i2c_id);
+static const struct of_device_id tda1997x_of_id[] __maybe_unused = {
- { .compatible = "nxp,tda19971", .data = &tda1997x_chip_info[TDA19971] },
- { .compatible = "nxp,tda19973", .data = &tda1997x_chip_info[TDA19973] },
- { },
+}; +MODULE_DEVICE_TABLE(of, tda1997x_of_id);
+static int tda1997x_parse_dt(struct tda1997x_state *state) +{
- struct tda1997x_platform_data *pdata = &state->pdata;
- struct v4l2_fwnode_endpoint bus_cfg;
- struct device_node *ep;
- struct device_node *np;
- unsigned int flags;
- const char *str;
- int ret;
- u32 v;
- /*
* setup default values:* - HREF: active high from start to end of row* - VS: Vertical Sync active high at beginning of frame* - DE: Active high when data valid* - A_CLK: 128*Fs*/- pdata->vidout_sel_hs = HS_HREF_SEL_HREF_VHREF;
- pdata->vidout_sel_vs = VS_VREF_SEL_VREF_HDMI;
- pdata->vidout_sel_de = DE_FREF_SEL_DE_VHREF;
- np = state->client->dev.of_node;
- ep = of_graph_get_next_endpoint(np, NULL);
- if (!ep)
return -EINVAL;- ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
- if (ret) {
of_node_put(ep);return ret;- }
- of_node_put(ep);
- /* polarity of HS/VS/DE */
- flags = bus_cfg.bus.parallel.flags;
- if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
pdata->vidout_inv_hs = 1;- if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
pdata->vidout_inv_vs = 1;- if (flags & V4L2_MBUS_DATA_ACTIVE_LOW)
pdata->vidout_inv_de = 1;- pdata->vidout_bus_width = bus_cfg.bus.parallel.bus_width;
- /* video output port config */
- ret = of_property_count_u32_elems(np, "nxp,vidout-portcfg");
- if (ret > 0) {
u32 reg, val, i;for (i = 0; i < ret / 2 && i < 9; i++) {of_property_read_u32_index(np, "nxp,vidout-portcfg",i * 2, ®);of_property_read_u32_index(np, "nxp,vidout-portcfg",i * 2 + 1, &val);if (reg < 9)pdata->vidout_port_cfg[reg] = val;}- } else {
v4l_err(state->client, "nxp,vidout-portcfg missing\n");return -EINVAL;- }
- /* default to channel layout dictated by packet header */
- pdata->audout_layoutauto = true;
- pdata->audout_format = AUDFMT_TYPE_DISABLED;
- if (!of_property_read_string(np, "nxp,audout-format", &str)) {
if (strcmp(str, "i2s") == 0)pdata->audout_format = AUDFMT_TYPE_I2S;else if (strcmp(str, "spdif") == 0)pdata->audout_format = AUDFMT_TYPE_SPDIF;else {v4l_err(state->client, "nxp,audout-format invalid\n");return -EINVAL;}if (!of_property_read_u32(np, "nxp,audout-layout", &v)) {switch (v) {case 0:case 1:break;default:v4l_err(state->client,"nxp,audout-layout invalid\n");return -EINVAL;}pdata->audout_layout = v;}if (!of_property_read_u32(np, "nxp,audout-width", &v)) {switch (v) {case 16:case 32:break;default:v4l_err(state->client,"nxp,audout-width invalid\n");return -EINVAL;}pdata->audout_width = v;}if (!of_property_read_u32(np, "nxp,audout-mclk-fs", &v)) {switch (v) {case 512:case 256:case 128:case 64:case 32:case 16:break;default:v4l_err(state->client,"nxp,audout-mclk-fs invalid\n");return -EINVAL;}pdata->audout_mclk_fs = v;}- }
- return 0;
+}
+static int tda1997x_get_regulators(struct tda1997x_state *state) +{
- int i;
- for (i = 0; i < TDA1997X_NUM_SUPPLIES; i++)
state->supplies[i].supply = tda1997x_supply_name[i];- return devm_regulator_bulk_get(&state->client->dev,
TDA1997X_NUM_SUPPLIES,state->supplies);+}
+static int tda1997x_identify_module(struct tda1997x_state *state) +{
- struct v4l2_subdev *sd = &state->sd;
- enum tda1997x_type type;
- u8 reg;
- /* Read chip configuration*/
- reg = io_read(sd, REG_CMTP_REG10);
- state->tmdsb_clk = (reg >> 6) & 0x01; /* use tmds clock B_inv for B */
- state->tmdsb_soc = (reg >> 5) & 0x01; /* tmds of input B */
- state->port_30bit = (reg >> 2) & 0x03; /* 30bit vs 24bit */
- state->output_2p5 = (reg >> 1) & 0x01; /* output supply 2.5v */
- switch ((reg >> 4) & 0x03) {
- case 0x00:
type = TDA19971;break;- case 0x02:
- case 0x03:
type = TDA19973;break;- default:
dev_err(&state->client->dev, "unsupported chip ID\n");return -EIO;- }
- if (state->info->type != type) {
dev_err(&state->client->dev, "chip id mismatch\n");return -EIO;- }
- /* read chip revision */
- state->chip_revision = io_read(sd, REG_CMTP_REG11);
- return 0;
+}
+static const struct media_entity_operations tda1997x_media_ops = {
- .link_validate = v4l2_subdev_link_validate,
+};
+/* -----------------------------------------------------------------------------
- HDMI Audio Codec
- */
+/* refine sample-rate based on HDMI source */ +static int tda1997x_pcm_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)+{
- struct tda1997x_state *state = snd_soc_dai_get_drvdata(dai);
- struct snd_soc_codec *codec = dai->codec;
- struct snd_pcm_runtime *rtd = substream->runtime;
- int rate, err;
- rate = state->audio_samplerate;
- err = snd_pcm_hw_constraint_minmax(rtd, SNDRV_PCM_HW_PARAM_RATE,
rate, rate);- if (err < 0) {
dev_err(codec->dev, "failed to constrain samplerate to %dHz\n",rate);return err;- }
- dev_info(codec->dev, "set samplerate constraint to %dHz\n", rate);
- return 0;
+}
+static const struct snd_soc_dai_ops tda1997x_dai_ops = {
- .startup = tda1997x_pcm_startup,
+};
+static struct snd_soc_dai_driver tda1997x_audio_dai = {
- .name = "tda1997x",
- .capture = {
.stream_name = "Capture",.channels_min = 2,.channels_max = 8,.rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |SNDRV_PCM_RATE_96000 | SNDRV_PCM_RATE_176400 |SNDRV_PCM_RATE_192000,- },
- .ops = &tda1997x_dai_ops,
+};
+static int tda1997x_codec_probe(struct snd_soc_codec *codec) +{
- return 0;
+}
+static int tda1997x_codec_remove(struct snd_soc_codec *codec) +{
- return 0;
+}
+static struct snd_soc_codec_driver tda1997x_codec_driver = {
- .probe = tda1997x_codec_probe,
- .remove = tda1997x_codec_remove,
- .reg_word_size = sizeof(u16),
+};
+static int tda1997x_probe(struct i2c_client *client,
const struct i2c_device_id *id)+{
- struct tda1997x_state *state;
- struct tda1997x_platform_data *pdata;
- struct v4l2_subdev *sd;
- struct v4l2_ctrl_handler *hdl;
- struct v4l2_ctrl *ctrl;
- static const struct v4l2_dv_timings cea1920x1080 =
V4L2_DV_BT_CEA_1920X1080P60;- int ret;
- /* Check if the adapter supports the needed features */
- if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;- state = kzalloc(sizeof(struct tda1997x_state), GFP_KERNEL);
- if (!state)
return -ENOMEM;- state->client = client;
- pdata = &state->pdata;
- if (IS_ENABLED(CONFIG_OF) && client->dev.of_node) {
const struct of_device_id *oid;oid = of_match_node(tda1997x_of_id, client->dev.of_node);state->info = oid->data;ret = tda1997x_parse_dt(state);if (ret < 0) {v4l_err(client, "DT parsing error\n");goto err_free_state;}- } else if (client->dev.platform_data) {
struct tda1997x_platform_data *pdata =client->dev.platform_data;state->info =(const struct tda1997x_chip_info *)id->driver_data;state->pdata = *pdata;- } else {
v4l_err(client, "No platform data\n");ret = -ENODEV;goto err_free_state;- }
- ret = tda1997x_get_regulators(state);
- if (ret)
goto err_free_state;- ret = tda1997x_set_power(state, 1);
- if (ret)
goto err_free_state;- mutex_init(&state->page_lock);
- mutex_init(&state->lock);
- state->page = 0xff;
- INIT_DELAYED_WORK(&state->delayed_work_enable_hpd,
tda1997x_delayed_work_enable_hpd);- /* set video format based on chip and bus width */
- ret = tda1997x_identify_module(state);
- if (ret)
goto err_free_mutex;- /* initialize subdev */
- sd = &state->sd;
- v4l2_i2c_subdev_init(sd, client, &tda1997x_subdev_ops);
- snprintf(sd->name, sizeof(sd->name), "%s %d-%04x",
id->name, i2c_adapter_id(client->adapter),client->addr);- sd->flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS;
- sd->entity.ops = &tda1997x_media_ops;
- switch (state->info->type) {
- case TDA19973:
switch (pdata->vidout_bus_width) {case 36: /* 36bit RGB (could also be 36bit YUV) */state->code = MEDIA_BUS_FMT_YUV12_1X36;break;case 24: /* 24bit BT656 (YUV422 semi-planar: 1-cycle) */state->code = MEDIA_BUS_FMT_UYVY12_1X24;break;case 12: /* 12bit BT656 (2-cycle) */state->code = MEDIA_BUS_FMT_UYVY12_2X12;break;}break;- case TDA19971:
switch (pdata->vidout_bus_width) {case 24: /* 24bit YUV (could also be RGB or YUV422) */state->code = MEDIA_BUS_FMT_YUV8_1X24;break;case 20: /* 20bit YUV422 */state->code = MEDIA_BUS_FMT_UYVY10_1X20;break;case 16: /* 16bit BT656 (YUV422 semi-planar: 1-cycle) */state->code = MEDIA_BUS_FMT_UYVY8_1X16;break;case 12: /* 12bit BT656 (2-cycle) */state->code = MEDIA_BUS_FMT_UYVY12_2X12;break;case 10: /* 10bit BT656 (2-cycle) */state->code = MEDIA_BUS_FMT_UYVY10_2X10;break;case 8: /* 8bit BT656 (2-cycle) */state->code = MEDIA_BUS_FMT_UYVY8_2X8;break;}- }
- switch (state->code) {
- case MEDIA_BUS_FMT_RGB121212_1X36:
- case MEDIA_BUS_FMT_RGB888_1X24:
- case MEDIA_BUS_FMT_YUV12_1X36:
- case MEDIA_BUS_FMT_YUV8_1X24:
state->bus_type = V4L2_MBUS_PARALLEL;state->vid_fmt = OF_FMT_444;break;- case MEDIA_BUS_FMT_UYVY12_1X24:
- case MEDIA_BUS_FMT_UYVY8_1X16:
state->bus_type = V4L2_MBUS_BT656;state->vid_fmt = OF_FMT_422_SMPT;break;- case MEDIA_BUS_FMT_UYVY12_2X12:
- case MEDIA_BUS_FMT_UYVY10_2X10:
- case MEDIA_BUS_FMT_UYVY8_2X8:
state->bus_type = V4L2_MBUS_BT656;state->vid_fmt = OF_FMT_422_CCIR;break;- default:
v4l_err(state->client, "incompatible code (%x)\n", state->code);ret = -EINVAL;goto err_free_mutex;- }
- state->colorspace = HDMI_COLORSPACE_RGB;
- state->colorimetry = HDMI_COLORIMETRY_NONE;
- state->timings = cea1920x1080;
- /* disable/reset HDCP to get correct I2C access to Rx HDMI */
- io_write(sd, REG_MAN_SUS_HDMI_SEL, MAN_RST_HDCP | MAN_DIS_HDCP);
- /*
* if N2 version, reset compdel_bp as it may generate some small pixel* shifts in case of embedded sync/or delay lower than 4*/- if (state->chip_revision != 0) {
io_write(sd, REG_MAN_SUS_HDMI_SEL, 0x00);io_write(sd, REG_VDP_CTRL, 0x1f);- }
- v4l_info(client, "NXP %s N%d detected\n", state->info->name,
state->chip_revision + 1);- v4l_info(client, "video: %dbit %s %s MBUS_FMT=0x%x\n",
pdata->vidout_bus_width,(state->bus_type == V4L2_MBUS_PARALLEL) ? "parallel" : "BT656",vidfmt_names[state->vid_fmt],state->code);- if (pdata->audout_format) {
v4l_info(client, "audio: %dch %s layout%d sysclk=%d*fs\n",pdata->audout_layout ? 2 : 8,audfmt_names[pdata->audout_format],pdata->audout_layout,pdata->audout_mclk_fs);- }
- ret = 0x34 + ((io_read(sd, REG_SLAVE_ADDR)>>4) & 0x03);
- state->client_cec = i2c_new_dummy(client->adapter, ret);
- v4l_info(client, "CEC slave address 0x%02x\n", ret);
- ret = tda1997x_core_init(sd);
- if (ret)
goto err_free_mutex;- /* control handlers */
- hdl = &state->hdl;
- v4l2_ctrl_handler_init(hdl, 5);
- ctrl = v4l2_ctrl_new_std_menu(hdl, &tda1997x_ctrl_ops,
V4L2_CID_DV_RX_IT_CONTENT_TYPE,V4L2_DV_IT_CONTENT_TYPE_NO_ITC, 0,V4L2_DV_IT_CONTENT_TYPE_NO_ITC);- if (ctrl)
ctrl->flags |= V4L2_CTRL_FLAG_VOLATILE;- /* custom controls */
- state->detect_tx_5v_ctrl = v4l2_ctrl_new_std(hdl, NULL,
V4L2_CID_DV_RX_POWER_PRESENT, 0, 1, 0, 0);- state->rgb_quantization_range_ctrl = v4l2_ctrl_new_std_menu(hdl,
&tda1997x_ctrl_ops,V4L2_CID_DV_RX_RGB_RANGE, V4L2_DV_RGB_RANGE_FULL, 0,V4L2_DV_RGB_RANGE_AUTO);- /* initialize source pads */
- state->pads[TDA1997X_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
- ret = media_entity_pads_init(&sd->entity, TDA1997X_NUM_PADS,
state->pads);- if (ret) {
v4l_err(client, "failed entity_init: %d", ret);goto err_free_mutex;- }
- ret = v4l2_async_register_subdev(sd);
- if (ret)
goto err_free_media;- /* register audio DAI */
- if (pdata->audout_format) {
u64 formats;if (pdata->audout_width == 32)formats = SNDRV_PCM_FMTBIT_S32_LE;elseformats = SNDRV_PCM_FMTBIT_S16_LE;tda1997x_audio_dai.capture.formats = formats;ret = snd_soc_register_codec(&state->client->dev,&tda1997x_codec_driver,&tda1997x_audio_dai, 1);if (ret) {dev_err(&client->dev, "register audio codec failed\n");goto err_free_media;}dev_set_drvdata(&state->client->dev, state);v4l_info(state->client, "registered audio codec\n");- }
- /* request irq */
- ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, tda1997x_isr_thread,IRQF_TRIGGER_LOW | IRQF_ONESHOT,KBUILD_MODNAME, state);- if (ret) {
v4l_err(client, "irq%d reg failed: %d\n", client->irq, ret);goto err_free_media;- }
- return 0;
+err_free_media:
- media_entity_cleanup(&sd->entity);
+err_free_mutex:
- cancel_delayed_work(&state->delayed_work_enable_hpd);
- mutex_destroy(&state->page_lock);
- mutex_destroy(&state->lock);
+err_free_state:
- kfree(state);
- dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
- return ret;
+}
+static int tda1997x_remove(struct i2c_client *client) +{
- struct v4l2_subdev *sd = i2c_get_clientdata(client);
- struct tda1997x_state *state = to_state(sd);
- struct tda1997x_platform_data *pdata = &state->pdata;
- if (pdata->audout_format) {
snd_soc_unregister_codec(&client->dev);mutex_destroy(&state->audio_lock);- }
- disable_irq(state->client->irq);
- tda1997x_power_mode(state, 0);
- v4l2_async_unregister_subdev(sd);
- media_entity_cleanup(&sd->entity);
- regulator_bulk_disable(TDA1997X_NUM_SUPPLIES, state->supplies);
- i2c_unregister_device(state->client_cec);
- cancel_delayed_work(&state->delayed_work_enable_hpd);
- mutex_destroy(&state->page_lock);
- mutex_destroy(&state->lock);
- kfree(state);
- return 0;
+}
+static struct i2c_driver tda1997x_i2c_driver = {
- .driver = {
.name = "tda1997x",.owner = THIS_MODULE,.of_match_table = of_match_ptr(tda1997x_of_id),- },
- .probe = tda1997x_probe,
- .remove = tda1997x_remove,
- .id_table = tda1997x_i2c_id,
+};
+module_i2c_driver(tda1997x_i2c_driver);
+MODULE_AUTHOR("Tim Harvey tharvey@gateworks.com"); +MODULE_DESCRIPTION("TDA1997X HDMI Receiver driver"); +MODULE_LICENSE("GPL v2"); diff --git a/include/dt-bindings/media/tda1997x.h b/include/dt-bindings/media/tda1997x.h new file mode 100644 index 0000000..f4cdf87 --- /dev/null +++ b/include/dt-bindings/media/tda1997x.h @@ -0,0 +1,78 @@ +/*
- Copyright (C) 2017 Gateworks Corporation
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
- */
+#ifndef _DT_BINDINGS_MEDIA_TDA1997X_H +#define _DT_BINDINGS_MEDIA_TDA1997X_H
+/* TDA19973 36bit Video Port control registers */ +#define TDA1997X_VP36_35_32 0 +#define TDA1997X_VP36_31_28 1 +#define TDA1997X_VP36_27_24 2 +#define TDA1997X_VP36_23_20 3 +#define TDA1997X_VP36_19_16 4 +#define TDA1997X_VP36_15_12 5 +#define TDA1997X_VP36_11_08 6 +#define TDA1997X_VP36_07_04 7 +#define TDA1997X_VP36_03_00 8
+/* TDA19971 24bit Video Port control registers */ +#define TDA1997X_VP24_V23_20 0 +#define TDA1997X_VP24_V19_16 1 +#define TDA1997X_VP24_V15_12 3 +#define TDA1997X_VP24_V11_08 4 +#define TDA1997X_VP24_V07_04 6 +#define TDA1997X_VP24_V03_00 7
+/* Pin groups */ +#define TDA1997X_VP_OUT_EN 0x80 /* enable output group */ +#define TDA1997X_VP_HIZ 0x40 /* hi-Z output group when not used */ +#define TDA1997X_VP_SWP 0x10 /* pin-swap output group */ +#define TDA1997X_R_CR_CBCR_3_0 (0 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_R_CR_CBCR_7_4 (1 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_R_CR_CBCR_11_8 (2 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_B_CB_3_0 (3 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_B_CB_7_4 (4 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_B_CB_11_8 (5 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_G_Y_3_0 (6 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_G_Y_7_4 (7 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +#define TDA1997X_G_Y_11_8 (8 | TDA1997X_VP_OUT_EN | TDA1997X_VP_HIZ) +/* pinswapped groups */ +#define TDA1997X_R_CR_CBCR_3_0_S (TDA1997X_R_CR_CBCR_3_0 | TDA1997X_VP_SWAP) +#define TDA1997X_R_CR_CBCR_7_4_S (TDA1997X_R_CR_CBCR_7_4 | TDA1997X_VP_SWAP) +#define TDA1997X_R_CR_CBCR_11_8_S (TDA1997X_R_CR_CBCR_11_8 | TDA1997X_VP_SWAP) +#define TDA1997X_B_CB_3_0_S (TDA1997X_B_CB_3_0 | TDA1997X_VP_SWAP) +#define TDA1997X_B_CB_7_4_S (TDA1997X_B_CB_7_4 | TDA1997X_VP_SWAP) +#define TDA1997X_B_CB_11_8_S (TDA1997X_B_CB_11_8 | TDA1997X_VP_SWAP) +#define TDA1997X_G_Y_3_0_S (TDA1997X_G_Y_3_0 | TDA1997X_VP_SWAP) +#define TDA1997X_G_Y_7_4_S (TDA1997X_G_Y_7_4 | TDA1997X_VP_SWAP) +#define TDA1997X_G_Y_11_8_S (TDA1997X_G_Y_11_8 | TDA1997X_VP_SWAP)
+/* Audio bus DAI format */ +#define TDA1997X_I2S16 1 /* I2S 16bit */ +#define TDA1997X_I2S32 2 /* I2S 32bit */ +#define TDA1997X_SPDIF 3 /* SPDIF */ +#define TDA1997X_OBA 4 /* One Bit Audio */ +#define TDA1997X_DST 5 /* Direct Stream Transfer */ +#define TDA1997X_I2S16_HBR 6 /* HBR straight in I2S 16bit mode */ +#define TDA1997X_I2S16_HBR_DEMUX 7 /* HBR demux in I2S 16bit mode */ +#define TDA1997X_I2S32_HBR_DEMUX 8 /* HBR demux in I2S 32bit mode */ +#define TDA1997X_SPDIF_HBR_DEMUX 9 /* HBR demux in SPDIF mode */
+/* Audio bus channel layout */ +#define TDA1997X_LAYOUT0 0 /* 2-channel */ +#define TDA1997X_LAYOUT1 1 /* 8-channel */
+/* Audio bus clock */ +#define TDA1997X_ACLK_16FS 0 +#define TDA1997X_ACLK_32FS 1 +#define TDA1997X_ACLK_64FS 2 +#define TDA1997X_ACLK_128FS 3 +#define TDA1997X_ACLK_256FS 4 +#define TDA1997X_ACLK_512FS 5
+#endif /* _DT_BINDINGS_MEDIA_TDA1997X_H */ diff --git a/include/media/i2c/tda1997x.h b/include/media/i2c/tda1997x.h new file mode 100644 index 0000000..50cb847 --- /dev/null +++ b/include/media/i2c/tda1997x.h @@ -0,0 +1,53 @@ +/*
- tda1997x - NXP HDMI receiver
- Copyright 2017 Tim Harvey tharvey@gateworks.com
- This program is free software; you may redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; version 2 of the License.
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
- MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
- BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
- ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
- CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
- SOFTWARE.
- */
+#ifndef _TDA1997X_ +#define _TDA1997X_
+/* Platform Data */ +struct tda1997x_platform_data {
- u32 vidout_bus_width;
- u8 vidout_port_cfg[9];
- /* pin polarity (1=invert) */
- bool vidout_inv_de;
- bool vidout_inv_hs;
- bool vidout_inv_vs;
- bool vidout_inv_pclk;
- /* clock delays (0=-8, 1=-7 ... 15=+7 pixels) */
- u8 vidout_delay_hs;
- u8 vidout_delay_vs;
- u8 vidout_delay_de;
- u8 vidout_delay_pclk;
- /* sync selections (controls how sync pins are derived) */
- u8 vidout_sel_hs;
- u8 vidout_sel_vs;
- u8 vidout_sel_de;
- /* Audio Port Output */
- int audout_format;
- u32 audout_mclk_fs; /* clock multiplier */
- u32 audout_width; /* 13 or 32 bit */
- u32 audout_layout; /* layout0=AP0 layout1=AP0,AP1,AP2,AP3 */
- bool audout_layoutauto; /* audio layout dictated by pkt header */
- bool audout_invert_clk; /* data valid on rising edge of BCLK */
- bool audio_auto_mute; /* enable hardware audio auto-mute */
+};
+#endif
Regards,
Hans