From: Ajit Pandey ajitp@codeaurora.org
Add platform driver for configuring sc7180 lpass core I2S and DMA configuration to support playback & capture to external codecs connected over primary & secondary MI2S interfaces.
Signed-off-by: Ajit Pandey ajitp@codeaurora.org Signed-off-by: Rohit kumar rohkumar@qti.qualcomm.com --- sound/soc/qcom/Kconfig | 5 + sound/soc/qcom/Makefile | 2 + sound/soc/qcom/lpass-sc7180.c | 216 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 223 insertions(+) create mode 100644 sound/soc/qcom/lpass-sc7180.c
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig index 0ea4cde..87bec7f 100644 --- a/sound/soc/qcom/Kconfig +++ b/sound/soc/qcom/Kconfig @@ -24,6 +24,11 @@ config SND_SOC_LPASS_APQ8016 select SND_SOC_LPASS_CPU select SND_SOC_LPASS_PLATFORM
+config SND_SOC_LPASS_SC7180 + tristate + select SND_SOC_LPASS_CPU + select SND_SOC_LPASS_PLATFORM + config SND_SOC_STORM tristate "ASoC I2S support for Storm boards" depends on SND_SOC_QCOM diff --git a/sound/soc/qcom/Makefile b/sound/soc/qcom/Makefile index 41b2c7a..7972c94 100644 --- a/sound/soc/qcom/Makefile +++ b/sound/soc/qcom/Makefile @@ -4,11 +4,13 @@ snd-soc-lpass-cpu-objs := lpass-cpu.o snd-soc-lpass-platform-objs := lpass-platform.o snd-soc-lpass-ipq806x-objs := lpass-ipq806x.o snd-soc-lpass-apq8016-objs := lpass-apq8016.o +snd-soc-lpass-sc7180-objs := lpass-sc7180.o
obj-$(CONFIG_SND_SOC_LPASS_CPU) += snd-soc-lpass-cpu.o obj-$(CONFIG_SND_SOC_LPASS_PLATFORM) += snd-soc-lpass-platform.o obj-$(CONFIG_SND_SOC_LPASS_IPQ806X) += snd-soc-lpass-ipq806x.o obj-$(CONFIG_SND_SOC_LPASS_APQ8016) += snd-soc-lpass-apq8016.o +obj-$(CONFIG_SND_SOC_LPASS_SC7180) += snd-soc-lpass-sc7180.o
# Machine snd-soc-storm-objs := storm.o diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c new file mode 100644 index 00000000..dd85a97 --- /dev/null +++ b/sound/soc/qcom/lpass-sc7180.c @@ -0,0 +1,216 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2020, The Linux Foundation. All rights reserved. + * + * lpass-sc7180.c -- ALSA SoC platform-machine driver for QTi LPASS + */ + +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <dt-bindings/sound/sc7180-lpass.h> +#include <sound/pcm.h> +#include <sound/soc.h> + +#include "lpass-lpaif-reg.h" +#include "lpass.h" + +static struct snd_soc_dai_driver sc7180_lpass_cpu_dai_driver[] = { + [MI2S_PRIMARY] = { + .id = MI2S_PRIMARY, + .name = "Primary MI2S", + .playback = { + .stream_name = "Primary Playback", + .formats = SNDRV_PCM_FMTBIT_S16, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + }, + .capture = { + .stream_name = "Primary Capture", + .formats = SNDRV_PCM_FMTBIT_S16, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + }, + .probe = &asoc_qcom_lpass_cpu_dai_probe, + .ops = &asoc_qcom_lpass_cpu_dai_ops, + }, + + [MI2S_SECONDARY] = { + .id = MI2S_SECONDARY, + .name = "Secondary MI2S", + .playback = { + .stream_name = "Secondary Playback", + .formats = SNDRV_PCM_FMTBIT_S16, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .channels_min = 2, + .channels_max = 2, + }, + .probe = &asoc_qcom_lpass_cpu_dai_probe, + .ops = &asoc_qcom_lpass_cpu_dai_ops, + }, +}; + +static int sc7180_lpass_alloc_dma_channel(struct lpass_data *drvdata, + int direction) +{ + struct lpass_variant *v = drvdata->variant; + int chan = 0; + + if (direction == SNDRV_PCM_STREAM_PLAYBACK) { + chan = find_first_zero_bit(&drvdata->dma_ch_bit_map, + v->rdma_channels); + + if (chan >= v->rdma_channels) + return -EBUSY; + } else { + chan = find_next_zero_bit(&drvdata->dma_ch_bit_map, + v->wrdma_channel_start + + v->wrdma_channels, + v->wrdma_channel_start); + + if (chan >= v->wrdma_channel_start + v->wrdma_channels) + return -EBUSY; + } + + set_bit(chan, &drvdata->dma_ch_bit_map); + + return chan; +} + +static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan) +{ + clear_bit(chan, &drvdata->dma_ch_bit_map); + + return 0; +} + +static int sc7180_lpass_init(struct platform_device *pdev) +{ + struct lpass_data *drvdata = platform_get_drvdata(pdev); + struct lpass_variant *variant = drvdata->variant; + struct device *dev = &pdev->dev; + int ret, i; + + drvdata->clks = devm_kcalloc(dev, variant->num_clks, + sizeof(*drvdata->clks), GFP_KERNEL); + drvdata->num_clks = variant->num_clks; + + for (i = 0; i < drvdata->num_clks; i++) + drvdata->clks[i].id = variant->clk_name[i]; + + ret = devm_clk_bulk_get(dev, drvdata->num_clks, drvdata->clks); + if (ret) { + dev_err(dev, "Failed to get clocks %d\n", ret); + return ret; + } + + ret = clk_bulk_prepare_enable(drvdata->num_clks, drvdata->clks); + if (ret) { + dev_err(dev, "sc7180 clk_enable failed\n"); + return ret; + } + + return 0; +} + +static int sc7180_lpass_exit(struct platform_device *pdev) +{ + struct lpass_data *drvdata = platform_get_drvdata(pdev); + + clk_bulk_disable_unprepare(drvdata->num_clks, drvdata->clks); + + return 0; +} + +static struct lpass_variant sc7180_data = { + .i2sctrl_reg_base = 0x1000, + .i2sctrl_reg_stride = 0x1000, + .i2s_ports = 3, + .irq_reg_base = 0x9000, + .irq_reg_stride = 0x1000, + .irq_ports = 3, + .rdma_reg_base = 0xC000, + .rdma_reg_stride = 0x1000, + .rdma_channels = 5, + .dmactl_audif_start = 1, + .wrdma_reg_base = 0x18000, + .wrdma_reg_stride = 0x1000, + .wrdma_channel_start = 5, + .wrdma_channels = 4, + + .loopback = REG_FIELD_ID(0x1000, 17, 17, 3, 0x1000), + .spken = REG_FIELD_ID(0x1000, 16, 16, 3, 0x1000), + .spkmode = REG_FIELD_ID(0x1000, 11, 15, 3, 0x1000), + .spkmono = REG_FIELD_ID(0x1000, 10, 10, 3, 0x1000), + .micen = REG_FIELD_ID(0x1000, 9, 9, 3, 0x1000), + .micmode = REG_FIELD_ID(0x1000, 4, 8, 3, 0x1000), + .micmono = REG_FIELD_ID(0x1000, 3, 3, 3, 0x1000), + .wssrc = REG_FIELD_ID(0x1000, 2, 2, 3, 0x1000), + .bitwidth = REG_FIELD_ID(0x1000, 0, 0, 3, 0x1000), + + .rdma_dyncclk = REG_FIELD_ID(0xC000, 21, 21, 5, 0x1000), + .rdma_bursten = REG_FIELD_ID(0xC000, 20, 20, 5, 0x1000), + .rdma_wpscnt = REG_FIELD_ID(0xC000, 16, 19, 5, 0x1000), + .rdma_intf = REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000), + .rdma_fifowm = REG_FIELD_ID(0xC000, 1, 5, 5, 0x1000), + .rdma_enable = REG_FIELD_ID(0xC000, 0, 0, 5, 0x1000), + + .wrdma_dyncclk = REG_FIELD_ID(0x18000, 22, 22, 4, 0x1000), + .wrdma_bursten = REG_FIELD_ID(0x18000, 21, 21, 4, 0x1000), + .wrdma_wpscnt = REG_FIELD_ID(0x18000, 17, 20, 4, 0x1000), + .wrdma_intf = REG_FIELD_ID(0x18000, 12, 16, 4, 0x1000), + .wrdma_fifowm = REG_FIELD_ID(0x18000, 1, 5, 4, 0x1000), + .wrdma_enable = REG_FIELD_ID(0x18000, 0, 0, 4, 0x1000), + + .clk_name = (const char*[]) { + "noc", + "audio-core", + "sysnoc_mport", + }, + .num_clks = 3, + .dai_driver = sc7180_lpass_cpu_dai_driver, + .num_dai = ARRAY_SIZE(sc7180_lpass_cpu_dai_driver), + .dai_osr_clk_names = (const char *[]) { + "mclk0", + "null", + }, + .dai_bit_clk_names = (const char *[]) { + "pri_ibit", + "sec_ibit", + }, + .init = sc7180_lpass_init, + .exit = sc7180_lpass_exit, + .alloc_dma_channel = sc7180_lpass_alloc_dma_channel, + .free_dma_channel = sc7180_lpass_free_dma_channel, +}; + +static const struct of_device_id sc7180_lpass_cpu_device_id[] = { + {.compatible = "qcom,lpass-cpu-sc7180", .data = &sc7180_data}, + {} +}; + +static struct platform_driver sc7180_lpass_cpu_platform_driver = { + .driver = { + .name = "sc7180-lpass-cpu", + .of_match_table = of_match_ptr(sc7180_lpass_cpu_device_id), + }, + .probe = asoc_qcom_lpass_cpu_platform_probe, + .remove = asoc_qcom_lpass_cpu_platform_probe, +}; + +module_platform_driver(sc7180_lpass_cpu_platform_driver); + +MODULE_DESCRIPTION("SC7180 LPASS CPU DRIVER"); +MODULE_LICENSE("GPL v2");