On 3/31/20 9:10 AM, Lars-Peter Clausen wrote:
On 3/31/20 8:35 AM, 이경택 wrote:
On 3/31/20 7:55 AM, Lars-Peter Clausen wrote:
On 3/31/20 7:42 AM, 이경택 wrote:
Since a virtual mixer has no backing registers to decide which path to connect, it will try to match with initial value 0. This is to ensure that the default mixer choice will be correctly powered up during initialization.
Signed-off-by: Gyeongtaek Lee gt82.lee@samsung.com
sound/soc/soc-dapm.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 9fb54e6fe254..fc55a0534252 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -802,7 +802,16 @@ static void dapm_set_mixer_path_status(struct snd_soc_dapm_path *p, int i, val = max - val; p->connect = !!val; } else {
p->connect = 0;
/* since a virtual mixer has no backing registers to* decide which path to connect, it will try to match* with initial value 0. This is to ensure* that the default mixer choice will be* correctly powered up during initialization.*/val = 0;if (invert)val = max - val;p->connect = !!val;Do you have virtual mixers that have the inverted flag set and if yes why? Cause otherwise this is exactly the same as before.
Yes, I have virtual mixers with inverted flag. It is used to create a switch which is connected by default and can be disconnected when user application needs it. Actually hardware can't be disconnected by virtual switch. So, connected was better for default value for virtual mixers in my experience.
It would be good to mention this in the commit message, that the purpose of the patch is to allow virtual mixers with a default state of on.
I think you can also simplify the expression to just `p->connect = invert;`
Ok. I'll resend this patch with the purpose in commit message, and simplified code. Thank you for your quick response!