Get control of the device earlier and avoid trying to do an ASoC probe on a card that won't work.
Signed-off-by: Mark Brown broonie@opensource.wolfsonmicro.com --- sound/soc/codecs/wm8903.c | 41 +++++++++++++++++++++++------------------ 1 files changed, 23 insertions(+), 18 deletions(-)
diff --git a/sound/soc/codecs/wm8903.c b/sound/soc/codecs/wm8903.c index 004db57..9e52cf0 100644 --- a/sound/soc/codecs/wm8903.c +++ b/sound/soc/codecs/wm8903.c @@ -248,11 +248,6 @@ static bool wm8903_volatile_register(struct device *dev, unsigned int reg) } }
-static void wm8903_reset(struct snd_soc_codec *codec) -{ - snd_soc_write(codec, WM8903_SW_RESET_AND_ID, 0); -} - static int wm8903_cp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *kcontrol, int event) { @@ -1896,19 +1891,6 @@ static int wm8903_probe(struct snd_soc_codec *codec) return ret; }
- val = snd_soc_read(codec, WM8903_SW_RESET_AND_ID); - if (val != 0x8903) { - dev_err(codec->dev, - "Device with ID register %x is not a WM8903\n", val); - return -ENODEV; - } - - val = snd_soc_read(codec, WM8903_REVISION_NUMBER); - dev_info(codec->dev, "WM8903 revision %c\n", - (val & WM8903_CHIP_REV_MASK) + 'A'); - - wm8903_reset(codec); - /* Set up GPIOs and microphone detection */ if (pdata) { bool mic_gpio = false; @@ -2062,6 +2044,7 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { struct wm8903_priv *wm8903; + unsigned int val; int ret;
wm8903 = devm_kzalloc(&i2c->dev, sizeof(struct wm8903_priv), @@ -2080,6 +2063,28 @@ static __devinit int wm8903_i2c_probe(struct i2c_client *i2c, i2c_set_clientdata(i2c, wm8903); wm8903->irq = i2c->irq;
+ ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret); + goto err; + } + if (val != 0x8903) { + dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val); + ret = -ENODEV; + goto err; + } + + ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val); + if (ret != 0) { + dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret); + goto err; + } + dev_info(&i2c->dev, "WM8903 revision %c\n", + (val & WM8903_CHIP_REV_MASK) + 'A'); + + /* Reset the device */ + regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903); + ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm8903, &wm8903_dai, 1); if (ret != 0)