From: Steffen Aschbacher steffen.aschbacher@stihl.de
This change adds support the TAS5720A-Q1 audio codec, in the same driver as tas5720.
Functionally, this driver is pretty similar to it's TAS5720x variant.
The first 3 registers are the same, so the main control and device identification can happen with these registers.
The next registers differ. This variant offers control (in the registers) for 2 speakers, which is implemented here (in a basic manner).
Signed-off-by: Steffen Aschbacher steffen.aschbacher@stihl.de Signed-off-by: Alexandru Ardelean alex@shruggie.ro ---
Changelog v1 -> v2: - https://lore.kernel.org/alsa-devel/20230115193347.24190-2-alex@shruggie.ro/ - Removed unused variable 'val' in tas5720_mute_soc_component() - Added missing object 'tas5720' in tas5720_mute_soc_component()
sound/soc/codecs/tas5720.c | 104 ++++++++++++++++++++++++++++++++----- sound/soc/codecs/tas5720.h | 15 +++++- 2 files changed, 106 insertions(+), 13 deletions(-)
diff --git a/sound/soc/codecs/tas5720.c b/sound/soc/codecs/tas5720.c index 0587c9bb3c4e..2ad8fb29d005 100644 --- a/sound/soc/codecs/tas5720.c +++ b/sound/soc/codecs/tas5720.c @@ -30,6 +30,7 @@
enum tas572x_type { TAS5720, + TAS5720A_Q1, TAS5722, };
@@ -166,17 +167,26 @@ static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai, return -EINVAL; }
- /* Enable manual TDM slot selection (instead of I2C ID based) */ - ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG, - TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC); - if (ret < 0) - goto error_snd_soc_component_update_bits; + /* + * Enable manual TDM slot selection (instead of I2C ID based). + * This is not applicable to TAS5720A-Q1. + */ + switch (tas5720->devtype) { + case TAS5720A_Q1: + break; + default: + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL1_REG, + TAS5720_TDM_CFG_SRC, TAS5720_TDM_CFG_SRC); + if (ret < 0) + goto error_snd_soc_component_update_bits;
- /* Configure the TDM slot to process audio from */ - ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG, - TAS5720_TDM_SLOT_SEL_MASK, first_slot); - if (ret < 0) - goto error_snd_soc_component_update_bits; + /* Configure the TDM slot to process audio from */ + ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG, + TAS5720_TDM_SLOT_SEL_MASK, first_slot); + if (ret < 0) + goto error_snd_soc_component_update_bits; + break; + }
/* Configure TDM slot width. This is only applicable to TAS5722. */ switch (tas5720->devtype) { @@ -201,10 +211,22 @@ static int tas5720_set_dai_tdm_slot(struct snd_soc_dai *dai,
static int tas5720_mute_soc_component(struct snd_soc_component *component, int mute) { + struct tas5720_data *tas5720 = snd_soc_component_get_drvdata(component); + unsigned int reg, mask; int ret;
- ret = snd_soc_component_update_bits(component, TAS5720_DIGITAL_CTRL2_REG, - TAS5720_MUTE, mute ? TAS5720_MUTE : 0); + switch (tas5720->devtype) { + case TAS5720A_Q1: + reg = TAS5720_Q1_VOLUME_CTRL_CFG_REG; + mask = TAS5720_Q1_MUTE; + break; + default: + reg = TAS5720_DIGITAL_CTRL2_REG; + mask = TAS5720_MUTE; + break; + } + + ret = snd_soc_component_update_bits(component, reg, mask, mute ? mask : 0); if (ret < 0) { dev_err(component->dev, "error (un-)muting device: %d\n", ret); return ret; @@ -309,6 +331,9 @@ static int tas5720_codec_probe(struct snd_soc_component *component) case TAS5720: expected_device_id = TAS5720_DEVICE_ID; break; + case TAS5720A_Q1: + expected_device_id = TAS5720A_Q1_DEVICE_ID; + break; case TAS5722: expected_device_id = TAS5722_DEVICE_ID; break; @@ -474,6 +499,15 @@ static const struct regmap_config tas5720_regmap_config = { .volatile_reg = tas5720_is_volatile_reg, };
+static const struct regmap_config tas5720a_q1_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = TAS5720_MAX_REG, + .cache_type = REGCACHE_RBTREE, + .volatile_reg = tas5720_is_volatile_reg, +}; + static const struct regmap_config tas5722_regmap_config = { .reg_bits = 8, .val_bits = 8, @@ -494,6 +528,16 @@ static const DECLARE_TLV_DB_RANGE(dac_analog_tlv, 0x3, 0x3, TLV_DB_SCALE_ITEM(2630, 0, 0), );
+/* + * DAC analog gain for TAS5720A-Q1. There are three discrete values to select from, ranging + * from 19.2 dB to 25.0dB. + */ +static const DECLARE_TLV_DB_RANGE(dac_analog_tlv_a_q1, + 0x0, 0x0, TLV_DB_SCALE_ITEM(1920, 0, 0), + 0x1, 0x1, TLV_DB_SCALE_ITEM(2260, 0, 0), + 0x2, 0x2, TLV_DB_SCALE_ITEM(2500, 0, 0), +); + /* * DAC digital volumes. From -103.5 to 24 dB in 0.5 dB or 0.25 dB steps * depending on the device. Note that setting the gain below -100 dB @@ -540,6 +584,15 @@ static const struct snd_kcontrol_new tas5720_snd_controls[] = { TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv), };
+static const struct snd_kcontrol_new tas5720a_q1_snd_controls[] = { + SOC_DOUBLE_R_TLV("Speaker Driver Playback Volume", + TAS5720_Q1_VOLUME_CTRL_LEFT_REG, + TAS5720_Q1_VOLUME_CTRL_RIGHT_REG, + 0, 0xff, 0, tas5720_dac_tlv), + SOC_SINGLE_TLV("Speaker Driver Analog Gain", TAS5720_ANALOG_CTRL_REG, + TAS5720_ANALOG_GAIN_SHIFT, 3, 0, dac_analog_tlv_a_q1), +}; + static const struct snd_kcontrol_new tas5722_snd_controls[] = { SOC_SINGLE_EXT_TLV("Speaker Driver Playback Volume", 0, 0, 511, 0, @@ -577,6 +630,22 @@ static const struct snd_soc_component_driver soc_component_dev_tas5720 = { .endianness = 1, };
+static const struct snd_soc_component_driver soc_component_dev_tas5720_a_q1 = { + .probe = tas5720_codec_probe, + .remove = tas5720_codec_remove, + .suspend = tas5720_suspend, + .resume = tas5720_resume, + .controls = tas5720a_q1_snd_controls, + .num_controls = ARRAY_SIZE(tas5720a_q1_snd_controls), + .dapm_widgets = tas5720_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(tas5720_dapm_widgets), + .dapm_routes = tas5720_audio_map, + .num_dapm_routes = ARRAY_SIZE(tas5720_audio_map), + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, +}; + static const struct snd_soc_component_driver soc_component_dev_tas5722 = { .probe = tas5720_codec_probe, .remove = tas5720_codec_remove, @@ -636,6 +705,7 @@ static struct snd_soc_dai_driver tas5720_dai[] = {
static const struct i2c_device_id tas5720_id[] = { { "tas5720", TAS5720 }, + { "tas5720a-q1", TAS5720A_Q1 }, { "tas5722", TAS5722 }, { } }; @@ -662,6 +732,9 @@ static int tas5720_probe(struct i2c_client *client) case TAS5720: regmap_config = &tas5720_regmap_config; break; + case TAS5720A_Q1: + regmap_config = &tas5720a_q1_regmap_config; + break; case TAS5722: regmap_config = &tas5722_regmap_config; break; @@ -695,6 +768,12 @@ static int tas5720_probe(struct i2c_client *client) tas5720_dai, ARRAY_SIZE(tas5720_dai)); break; + case TAS5720A_Q1: + ret = devm_snd_soc_register_component(&client->dev, + &soc_component_dev_tas5720_a_q1, + tas5720_dai, + ARRAY_SIZE(tas5720_dai)); + break; case TAS5722: ret = devm_snd_soc_register_component(&client->dev, &soc_component_dev_tas5722, @@ -716,6 +795,7 @@ static int tas5720_probe(struct i2c_client *client) #if IS_ENABLED(CONFIG_OF) static const struct of_device_id tas5720_of_match[] = { { .compatible = "ti,tas5720", }, + { .compatible = "ti,tas5720a-q1", }, { .compatible = "ti,tas5722", }, { }, }; diff --git a/sound/soc/codecs/tas5720.h b/sound/soc/codecs/tas5720.h index 223858f0de71..b38459570241 100644 --- a/sound/soc/codecs/tas5720.h +++ b/sound/soc/codecs/tas5720.h @@ -10,7 +10,7 @@ #ifndef __TAS5720_H__ #define __TAS5720_H__
-/* Register Address Map */ +/* Register Address Map - first 3 regs are common for all variants */ #define TAS5720_DEVICE_ID_REG 0x00 #define TAS5720_POWER_CTRL_REG 0x01 #define TAS5720_DIGITAL_CTRL1_REG 0x02 @@ -27,7 +27,13 @@ #define TAS5722_ANALOG_CTRL2_REG 0x14 #define TAS5722_MAX_REG TAS5722_ANALOG_CTRL2_REG
+/* Register Address Map - volume controls for the TAS5720-Q1 variant */ +#define TAS5720_Q1_VOLUME_CTRL_CFG_REG 0x03 +#define TAS5720_Q1_VOLUME_CTRL_LEFT_REG 0x04 +#define TAS5720_Q1_VOLUME_CTRL_RIGHT_REG 0x05 + /* TAS5720_DEVICE_ID_REG */ +#define TAS5720A_Q1_DEVICE_ID 0x00 #define TAS5720_DEVICE_ID 0x01 #define TAS5722_DEVICE_ID 0x12
@@ -53,6 +59,10 @@ #define TAS5720_MUTE BIT(4) #define TAS5720_TDM_SLOT_SEL_MASK GENMASK(2, 0)
+/* TAS5720_Q1_VOLUME_CTRL_CFG_REG */ +#define TAS5720_Q1_FADE BIT(7) +#define TAS5720_Q1_MUTE GENMASK(1, 0) + /* TAS5720_ANALOG_CTRL_REG */ #define TAS5720_PWM_RATE_6_3_FSYNC (0x0 << 4) #define TAS5720_PWM_RATE_8_4_FSYNC (0x1 << 4) @@ -70,6 +80,9 @@ #define TAS5720_ANALOG_GAIN_MASK GENMASK(3, 2) #define TAS5720_ANALOG_GAIN_SHIFT (0x2)
+/* TAS5720_Q1_ANALOG_CTRL_REG */ +#define TAS5720_Q1_CHAN_SEL BIT(1) + /* TAS5720_FAULT_REG */ #define TAS5720_OC_THRESH_100PCT (0x0 << 4) #define TAS5720_OC_THRESH_75PCT (0x1 << 4)