7 Oct
2010
7 Oct
'10
11:59 p.m.
On 10/08/2010 10:46 AM, Timur Tabi wrote:
Ryan Mallon wrote:
- For setups with variable MCLKs, pass 0 as 'freq' argument. This will cause
- theoretically possible sample rates to be enabled. Call it again with a
- proper value set one the external clock is set (most probably you would do
- that from a machine's driver 'hw_param' hook.
If you're going to copy/paste parts of my driver verbatim into yours, you should put something like this in the comments:
Based on the CS4270 driver by Timur Tabi timur@freescale.com
Thanks. CC'ed Alexander, the driver author, who I stupidly left of the reply list.
~Ryan
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon 5 Amuri Park, 404 Barbadoes St
ryan@bluewatersys.com PO Box 13 889, Christchurch 8013
http://www.bluewatersys.com New Zealand
Phone: +64 3 3779127 Freecall: Australia 1800 148 751
Fax: +64 3 3779135 USA 1800 261 2934