Hi, I'm working with the ALC5640-VB audio codec based on the Realtek RT5640. On my setup the codec is only used for audio output through an headphone jack, otherwise the audio should be routed via HDMI.
The problem is that the jack sensing only works when the codec is actively playing something, that is when the bias set for the codec is not SND_SOC_BIAS_OFF. When the codec is suspended and it is powered off I'm not able to detect anymore the presence of the jack. Because of this issue actively switching the audio from HDMI to HP when the jack is inserted is not working.
The driver I'm using for the RT5640 in the .set_bias_level hook function among other things is gating the I2S input clock and this seems to prevent the generation of the IRQ signal I'm using to detect the presence/absence of the jack (the culprit here is MX-FA[0] bit for those interested).
I can easily modify the codec driver to avoid gating the I2S clock when the bias is off but this seems in contrast with the whole DAPM principle.
How this is usually supposed to be working?