Hello @ all,
I'm Rüdiger from Germany. I'm no programmer, that's my biggest fault
here. But because of a "private" problem with ALSA and Intel HDA I want to help whereever I can - at least with that special problem.
I'm running a Lenovo ThinkCentre A58 with a ALC662 rev. 1 chip on board.
The mainboard has 3 jacks at the back of the PC and 2 ones at it's front (mic and headphones).
The problem is, that the connectors are not automatically arranged to
playback 5.1 surround sound. I must manually set the "model" to "asusmode4" to get 5.1 and then run a script as root, to set the backside jacks to output and to Center/LFE and rear speaker. Also I have to mute the internal speaker.
I've tried to patch the module manually, but this went wrong somehow. I
don't know how to proceed.
So maybe you can help me and I can help you to complete the ALSA code for
this special mainboard/PC - hopefully.
So long, I would thank you for your feedback.
http://git.kernel.org/?p=linux/kernel/git/tiwai/sound.git;a=blob_plain;f=Doc...
Realtek codecs --------------
* Channel Mode This is an enum control to change the surround-channel setup, appears only when the surround channels are available. It gives the number of channels to be used, "2ch", "4ch", "6ch", and "8ch". According to the configuration, this also controls the jack-retasking of multi-I/O jacks.
Auto-Mute Mode This is an enum control to change the auto-mute behavior of the headphone and line-out jacks. If built-in speakers and headphon and/or line-out jacks are available on a machine, this control appears. When there are only either headphones or line-out jacks, it gives "Disabled" and "Enabled" state. When enabled, the speaker is muted automatically when a jack is plugged.
When both headphone and line-out jacks are present, it gives "Disabled", "Speaker Only" and "Line-Out+Speaker". When speaker-only is chosen, plugging into a headphone or a line-out jack mutes the speakers, but not line-outs. When line-out+speaker is selected, plugging to a headphone jack mutes both speakers and line-outs.
Can you try the daily snapshot tarball with model=auto and post the output of alsa-info.sh ?
http://mailman.alsa-project.org/pipermail/alsa-devel/2013-January/058218.htm...