2011/1/11 Wolfgang Scheicher wolfgang.scheicher@gmail.com
I used kernel 2.6.36 from debian experimental for quite some time now, without any problem: http://www.alsa-project.org/db/?f=11290fe50066e9bcd6a244f2c83b1c66c9dd201b
Upgrading to 2.6.37 from debian experimental left me unable to use my microphone: http://www.alsa-project.org/db/?f=0f29e6de98ea9fefae5c6e2adb43ff8f8eede697
I also noticed some (inconsisitent?) changes in the mixer channel names, like "Mic" became "Rear Mic", while "Mic Boost" remained.
Wolfgang Scheicher
Node 0x29 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Front Mic Boost Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Control: name="Smart 5.1", index=0, device=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x02a19137: [Jack] Mic at Ext Front Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x7 Misc = NO_PRESENCE Pin-ctls: 0x21: IN VREF_50 Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1c
Node 0x2b [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Mic Boost Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x00002334: IN OUT Detect Vref caps: HIZ 50 100 Pin Default 0x01a19036: [Jack] Mic at Ext Rear Conn = 1/8, Color = Pink DefAssociation = 0x3, Sequence = 0x6 Pin-ctls: 0x20: IN VREF_HIZ Unsolicited: tag=04, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x0a* 0x0c
Codec: VIA VT2020 Address: 0 AFG Function Id: 0x1 (unsol 0) Vendor Id: 0x11060441 Subsystem Id: 0x18492620 Revision Id: 0x100100
{ .id = 0x11060441, .name = "VT2020", .patch = patch_vt1718S},
It seem that node 0x2b and 0x29 of your vt2020 does not has any boost since vt2020 is using patch_vt1718s()
static struct snd_kcontrol_new vt1718S_capture_mixer[] = {
HDA_CODEC_VOLUME("Mic Boost Capture Volume", 0x2b, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Front Mic Boost Capture Volume", 0x29, 0x0, HDA_INPUT),
Node 0x21 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In Control: name="Front Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Front Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=3, ofs=0 Control: name="Rear Mic Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Rear Mic Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Line Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Control: name="Line Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=In, idx=2, ofs=0 Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x9f 0x9f] [0x80 0x80] [0x8f 0x8f] Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 5 0x2c 0x2b 0x2a 0x29 0x28
Node 0x28 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out Control: name="Headphone Playback Switch", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1 Amp-Out vals: [0x00 0x00] Pincap 0x0000233c: IN OUT HP Detect Vref caps: HIZ 50 100 Pin Default 0x0221411f: [Jack] HP Out at Ext Front Conn = 1/8, Color = Green DefAssociation = 0x1, Sequence = 0xf Misc = NO_PRESENCE Pin-ctls: 0xc0: OUT HP VREF_HIZ Unsolicited: tag=05, enabled=1 Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x1b
Node 0x21 has only 5 connections but the driver use AMP_IN_MUTE(5) instead of AMP_IN_MUTE(4)
node 0x28 only has one connection to 0x1b
static struct hda_verb vt1718S_volume_init_verbs[] = {
/* Setup default input of Front HP to MW9 */ {0x28, AC_VERB_SET_CONNECT_SEL, 0x1},
/* Mute input amps (CD, Line In, Mic 1 & Mic 2) of the analog-loopback * mixer widget */
/* Amp Indices: CD = 1, Mic1 = 2, Line = 3, Mic2 = 4 */ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
if if is regression , you may need to check those patches
sticky PCM stream assignment smart5.1 mode http://git.alsa-project.org/?p=alsa-kernel.git;a=commit;h=0e7adbe263f89ea2ef15b5af5e80a812b2a85025