Add the necessary DT nodes for the Rock 5B board to enable the analog audio support provided by the Everest Semi ES8316 codec.
Signed-off-by: Cristian Ciocaltea cristian.ciocaltea@collabora.com --- .../boot/dts/rockchip/rk3588-rock-5b.dts | 62 +++++++++++++++++++ 1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index 95805cb0adfa..945eac304766 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -2,6 +2,7 @@
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h> #include "rk3588.dtsi"
/ { @@ -25,6 +26,59 @@ vcc5v0_sys: vcc5v0-sys-regulator { regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sound { + compatible = "audio-graph-card"; + label = "Analog"; + + widgets = "Microphone", "Mic Jack", + "Headphone", "Headphones"; + + routing = "MIC2", "Mic Jack", + "Headphones", "HPOL", + "Headphones", "HPOR"; + + dais = <&i2s0_8ch_p0>; + hp-det-gpio = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hp_detect>; + }; +}; + +&i2c7 { + status = "okay"; + + es8316: es8316@11 { + compatible = "everest,es8316"; + reg = <0x11>; + clocks = <&cru I2S0_8CH_MCLKOUT>; + clock-names = "mclk"; + #sound-dai-cells = <0>; + + port { + es8316_p0_0: endpoint { + remote-endpoint = <&i2s0_8ch_p0_0>; + }; + }; + }; +}; + +&i2s0_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_lrck + &i2s0_mclk + &i2s0_sclk + &i2s0_sdi0 + &i2s0_sdo0>; + status = "okay"; + + i2s0_8ch_p0: port { + i2s0_8ch_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&es8316_p0_0>; + }; + }; };
&sdhci { @@ -42,3 +96,11 @@ &uart2 { pinctrl-0 = <&uart2m0_xfer>; status = "okay"; }; + +&pinctrl { + sound { + hp_detect: hp-detect { + rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +};