From: Peter Ujfalusi peter.ujfalusi@nokia.com
It adds a new sysfs file, where the user can configure the mcbsp mode to use. If the mcbsp channel is in use, it does not allow the change. Than in omap_pcm_open we can call the omap_mcbsp_get_opmode to get the mode, store it, than use it to implement the different modes.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@nokia.com Signed-off-by: Eduardo Valentin eduardo.valentin@nokia.com --- arch/arm/plat-omap/include/mach/mcbsp.h | 8 +++ arch/arm/plat-omap/mcbsp.c | 84 +++++++++++++++++++++++++++++++ 2 files changed, 92 insertions(+), 0 deletions(-)
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 832330d..bd5b759 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -255,6 +255,11 @@ /********************** McBSP SYSCONFIG bit definitions ********************/ #define SOFTRST 0x0002
+/********************** McBSP DMA operating modes **************************/ +#define MCBSP_DMA_MODE_ELEMENT 0 +#define MCBSP_DMA_MODE_THRESHOLD 1 +#define MCBSP_DMA_MODE_FRAME 2 + /* we don't do multichannel for now */ struct omap_mcbsp_reg_cfg { u16 spcr2; @@ -385,6 +390,7 @@ struct omap_mcbsp { struct clk *iclk; struct clk *fclk; #ifdef CONFIG_ARCH_OMAP34XX + int dma_op_mode; u16 max_tx_thres; u16 max_rx_thres; #endif @@ -401,6 +407,7 @@ void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold); void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold); u16 omap_mcbsp_get_max_tx_threshold(unsigned int id); u16 omap_mcbsp_get_max_rx_threshold(unsigned int id); +int omap_mcbsp_get_dma_op_mode(unsigned int id); #else static inline void omap_mcbsp_set_tx_threshold(unsigned int id, u16 threshold) { } @@ -408,6 +415,7 @@ static inline void omap_mcbsp_set_rx_threshold(unsigned int id, u16 threshold) { } static inline u16 omap_mcbsp_get_max_tx_threshold(unsigned int id) { return 0; } static inline u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) { return 0; } +static inline int omap_mcbsp_get_dma_op_mode(unsigned int id) { return 0; } #endif int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index ccaa9ae..9e69994 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -282,6 +282,29 @@ u16 omap_mcbsp_get_max_rx_threshold(unsigned int id) return mcbsp->max_rx_thres; } EXPORT_SYMBOL(omap_mcbsp_get_max_rx_threshold); + +/* + * omap_mcbsp_get_dma_op_mode just return the current configured + * operating mode for the mcbsp channel + */ +int omap_mcbsp_get_dma_op_mode(unsigned int id) +{ + struct omap_mcbsp *mcbsp; + int dma_op_mode; + + if (!omap_mcbsp_check_valid_id(id)) { + printk(KERN_ERR "%s: Invalid id (%u)\n", __func__, id + 1); + return -ENODEV; + } + mcbsp = id_to_mcbsp_ptr(id); + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + return dma_op_mode; +} +EXPORT_SYMBOL(omap_mcbsp_get_dma_op_mode); #endif
/* @@ -1077,9 +1100,65 @@ static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); THRESHOLD_PROP_BUILDER(max_tx_thres); THRESHOLD_PROP_BUILDER(max_rx_thres);
+static ssize_t dma_op_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + int dma_op_mode; + + spin_lock_irq(&mcbsp->lock); + dma_op_mode = mcbsp->dma_op_mode; + spin_unlock_irq(&mcbsp->lock); + + return sprintf(buf, "current mode: %d\n" + "possible mode values are:\n" + "%d - %s\n" + "%d - %s\n" + "%d - %s\n", + dma_op_mode, + MCBSP_DMA_MODE_ELEMENT, "element mode", + MCBSP_DMA_MODE_THRESHOLD, "threshold mode", + MCBSP_DMA_MODE_FRAME, "frame mode"); +} + +static ssize_t dma_op_mode_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); + unsigned long val; + int status; + + status = strict_strtoul(buf, 0, &val); + if (status) + return status; + + spin_lock_irq(&mcbsp->lock); + + if (!mcbsp->free) { + size = -EBUSY; + goto unlock; + } + + if (val > MCBSP_DMA_MODE_FRAME || val < MCBSP_DMA_MODE_ELEMENT) { + size = -EINVAL; + goto unlock; + } + + mcbsp->dma_op_mode = val; + +unlock: + spin_unlock_irq(&mcbsp->lock); + + return size; +} + +static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); + static const struct attribute *additional_attrs[] = { &dev_attr_max_tx_thres.attr, &dev_attr_max_rx_thres.attr, + &dev_attr_dma_op_mode.attr, NULL, };
@@ -1099,9 +1178,14 @@ static inline void __devexit omap_additional_remove(struct device *dev)
static inline void __devinit omap34xx_device_init(struct omap_mcbsp *mcbsp) { + mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; if (cpu_is_omap34xx()) { mcbsp->max_tx_thres = max_thres(mcbsp); mcbsp->max_rx_thres = max_thres(mcbsp); + /* + * REVISIT: Set dmap_op_mode to THRESHOLD as default + * for mcbsp2 instances. + */ if (omap_additional_add(mcbsp->dev)) dev_warn(mcbsp->dev, "Unable to create additional controls\n");