I've been helping GN out on the user list, to get his sound working. The sound is now working, but only by using the options line below. options snd-hda-intel probe_mask=1. I see on the changelog for 1.0.18 > 1.0.18a that Takashi added a quirk for a Medion MD96630 as below.
<quote> - ALSA: hda - Add a quirk for MEDION MD96630 Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085) with ALC888 codec. Reference: Novell bnc#412548 https://bugzilla.novell.com/show_bug.cgi?id=412528 Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Jaroslav Kysela perex@perex.cz
<end quote>
Some details of his machine, OS, and other output below.
Medion MD96420. Model MIM 2300 Notebook PC
OS: Fedora 9, with alsadriver 1.0.16 upgraded to 1.0.18a
Desktop: KDE 4.1
/sbin/lspci (soundcard part) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03) Subsystem: Mitac Unknown device 8227 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 22 Region 0: Memory at fc200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel
[graeme@flintstone ~]$ cat /proc/asound/cards 0 [Intel ]: HDA-Intel - HDA Intel HDA Intel at 0xfc200000 irq 22
[graeme@flintstone ~]$ grep ^Codec /proc/asound/card?/codec* /proc/asound/card0/codec#0:Codec: Realtek ALC883 /proc/asound/card0/codec#1:Codec: LSI ID 1040 /proc/asound/card0/codec#2:Codec: Realtek ALC268
A bit of info from Graeme (aka GN), after asking him to try probe_mask=1.
<quote> I tried the different probe-mask=?. Probe-mask=1 works OK but not the others. model=lenovo-ms7195-dig doesn't work. Kmix shows varying channels depending on the 'model' or 'probe-mask' used. probe-mask=1 gives the most channels. alsamixer now loads up OK but still no sound. Shows as ALC883 with 'probe-mask=1' Starting Amarok elicits the xine error dialogue window with "xine was unable to initialize any audio drivers"
UPDATE:
With 'probe-mask=1 and using Rhythmbox I can get sound out of the speakers and the front headphone jack. Volume not very high out of the speakers but is good from the headphones. Too much system activity or keyboard activity (I'm writing this listening to Tchaikovsky and I can hear interruptions from the keyboard at times) seems to interfere with the audio stream. Also there is a lot of noise from the CD drive coming through the earphones. Don't know how that is happening. Pulseaudio Vol Cntl can be used as can the panel Vol. Cntl. and also alsamixer. <end quote>
The last things I asked him to try, were to disable Pulseaudio, by removing the package alsa-plugins-pulseaudio, and to try the latest snapshot for the alsa driver.
Disabling pulseaudio has resulted in good sound levels from the speakers, but as he is away for a few days, he hasn't yet tried the latest snapshot of the alsa driver.
A few extra details. Without a model option all snd modules were loaded, but no card was detected. Using the option model=medion, resulted in the card being detected, but problems with alsamixer as below. model=mitac gives same results as below.
<quote from Graeme's reply on user list> [graeme@flintstone ~]$ amixer ALSA lib simple_none.c:1491:(simple_add1) helem (MIXER,'Headphone Playback Switch',0,2,0) appears twice or more amixer: Mixer default load error: Invalid argument [graeme@flintstone ~]$ alsamixer ALSA lib simple_none.c:1491:(simple_add1) helem (MIXER,'Headphone Playback Switch',0,2,0) appears twice or more
alsamixer: function snd_mixer_load failed: Invalid argument <end quote>
Then I searched through the changelog, found the bug report about the codec conflicts, and suggested probe_mask=1, which has got the sound working.
I think I've gone about as far as I can now, which is why I'm posting this to the devel list.
Nigel.