26 Nov
2014
26 Nov
'14
6:36 p.m.
On Wed, Nov 26, 2014 at 12:33:10PM +0100, Lars-Peter Clausen wrote:
On 11/26/2014 12:02 PM, Zidan Wang wrote:
When shared_lrclk is set, LRCM will be enabled. But the following software reset in wm8960_probe will reset it to the default state. So LRCM operation should after software reset.
It's probably a better idea to move the reset (together with the other register updates) to the I2C driver probe.
Yes, this is not a good fix.