Change the default quirk settings to enable jack-detect, analog mics.
The old default input mapping of DMIC for non Bay Trail CR devices seems like a poor default as I'm not aware of any Intel SST + rt5651 using devices with a DMIC.
All Cherry Trail devices using the bytcr_rt5651 machine driver seem to be modelled after BYT-CR devices, And the only non CR Bay Trail devices with a rt5651 codec I'm aware of are the Minnow boards for which we already have board specific quirks. So it seems better to me to use the BYT-CR defaults everywhere.
This e.g. makes the Chuwi Hi8 Pro (CWI513) work ootb without needing a quirk.
Signed-off-by: Hans de Goede hdegoede@redhat.com --- sound/soc/intel/boards/bytcr_rt5651.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index e395c9c179a1..c695247341f3 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -84,7 +84,12 @@ struct byt_rt5651_private { struct snd_soc_jack jack; };
-static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN; +/* Default: jack-detect on JD1_1, internal mic on in2, headsetmic on in3 */ +static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN | + BYT_RT5651_JD1_1 | + BYT_RT5651_OVCD_TH_2000UA | + BYT_RT5651_OVCD_SF_0P75 | + BYT_RT5651_IN2_HS_IN3_MAP;
static void log_quirks(struct device *dev) { @@ -791,14 +796,6 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) /* no BIOS indications, assume SSP0-AIF2 connection */ byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2; } - - /* change defaults for Baytrail-CR capture */ - byt_rt5651_quirk |= BYT_RT5651_JD1_1 | - BYT_RT5651_OVCD_TH_2000UA | - BYT_RT5651_OVCD_SF_0P75 | - BYT_RT5651_IN2_HS_IN3_MAP; - } else { - byt_rt5651_quirk |= BYT_RT5651_DMIC_MAP; }
/* check quirks before creating card */