The PinePhone has a Bluetooth chip with its PCM interface connected to AIF3. Add the DAI link so headeset audio can be routed in hardware.
Even though the link is 16 bit PCM, configuring the link a 32-bit slot is required for compatibility with AIF2, which also uses a 32-bit slot, and which shares clock dividers with AIF3. Using equal clock frequencies allows the modem and headset to be used at the same time.
Signed-off-by: Samuel Holland samuel@sholland.org --- .../dts/allwinner/sun50i-a64-pinephone.dtsi | 24 +++++++++++++++++++ 1 file changed, 24 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi index 9f69d489a81d..51cbfdc12936 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi @@ -25,6 +25,11 @@ backlight: backlight { /* Backlight configuration differs per PinePhone revision. */ };
+ bt_sco_codec: bt-sco-codec { + #sound-dai-cells = <1>; + compatible = "linux,bt-sco"; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -91,6 +96,8 @@ vibrator { };
&codec { + pinctrl-names = "default"; + pinctrl-0 = <&aif3_pins>; status = "okay"; };
@@ -447,6 +454,23 @@ &sound { "MIC1", "Internal Microphone", "Headset Microphone", "HBIAS", "MIC2", "Headset Microphone"; + + simple-audio-card,dai-link@2 { + format = "dsp_a"; + frame-master = <&link2_codec>; + bitclock-master = <&link2_codec>; + bitclock-inversion; + + link2_cpu: cpu { + sound-dai = <&bt_sco_codec 0>; + }; + + link2_codec: codec { + sound-dai = <&codec 2>; + dai-tdm-slot-num = <1>; + dai-tdm-slot-width = <32>; + }; + }; };
&uart0 {