This patch adds a new DMA_TYPE for SSI dual FIFO script, included in SDMA firmware version 2. This script would allow SSI use dual fifo mode to transimit/receive data without occasional hardware underrun/overrun.
Signed-off-by: Nicolin Chen b42378@freescale.com --- Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt | 1 + drivers/dma/imx-sdma.c | 4 ++++ include/linux/platform_data/dma-imx.h | 1 + 3 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index 4fa814d..68b83ec 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -42,6 +42,7 @@ The full ID of peripheral types can be found below. 19 IPU Memory 20 ASRC 21 ESAI + 22 SSI Dual FIFO (needs firmware ver >= 2)
The third cell specifies the transfer priority as below.
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 43a8441..efe9d6a 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -725,6 +725,10 @@ static void sdma_get_pc(struct sdma_channel *sdmac, per_2_emi = sdma->script_addrs->app_2_mcu_addr; emi_2_per = sdma->script_addrs->mcu_2_app_addr; break; + case IMX_DMATYPE_SSI_DUAL: + per_2_emi = sdma->script_addrs->ssish_2_mcu_addr; + emi_2_per = sdma->script_addrs->mcu_2_ssish_addr; + break; case IMX_DMATYPE_SSI_SP: case IMX_DMATYPE_MMC: case IMX_DMATYPE_SDHC: diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h index beac6b8..bcbc6c3 100644 --- a/include/linux/platform_data/dma-imx.h +++ b/include/linux/platform_data/dma-imx.h @@ -39,6 +39,7 @@ enum sdma_peripheral_type { IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ IMX_DMATYPE_ASRC, /* ASRC */ IMX_DMATYPE_ESAI, /* ESAI */ + IMX_DMATYPE_SSI_DUAL, /* SSI Dual FIFO */ };
enum imx_dma_prio {