On Wed, 2015-06-24 at 13:31 +0200, Antonio Ospite wrote:
On Wed, 24 Jun 2015 15:51:57 +0530 Vinod Koul vinod.koul@intel.com wrote:
[...]
For Playback you can try:
#DSP routing amixer -c0 sset 'codec_out0 mix 0 pcm0_in' on amixer -c0 sset 'media0_out mix 0 media1_in' on amixer -c0 sset 'media1_in Gain 0' 80% amixer -c0 sset 'media1_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'media1_in Gain 0' off amixer -c0 sset 'pcm0_in Gain 0' 80% amixer -c0 sset 'pcm0_in Gain 0 Ramp Delay' 50 amixer -c0 sset 'pcm0_in Gain 0' off amixer -c0 sset 'codec_out0 Gain 0' 80% amixer -c0 sset 'codec_out0 Gain 0 Ramp Delay' 50 amixer -c0 sset 'codec_out0 Gain 0' off
#Codec routin, if you have different one please modfiy amixer -c0 sset "DAC MIXL INF1" on amixer -c0 sset "DAC MIXR INF1" on amixer -c0 sset "Stereo DAC MIXL DAC L1" on amixer -c0 sset "Stereo DAC MIXR DAC R1" on amixer -c0 sset "SPK MIXL DAC L1" on amixer -c0 sset "SPK MIXR DAC R1" on amixer -c0 sset "SPOL MIX SPKVOL L" on amixer -c0 sset "SPOR MIX SPKVOL R" on amixer -c0 sset "SPOL MIX DAC L1" on amixer -c0 sset "SPOR MIX DAC R1" on amixer -c0 sset "Speaker L" on amixer -c0 sset "Speaker R" on amixer -c0 sset "Headphone" off amixer -c0 sset "Ext Spk" on
I have used this in T100.
OK, I guess this answers my request for a state file :) I had not read this message yet when I wrote the other one.
Might be worth creating a UCM config for this machine since there are several different outputs.
Liam