On Wed, Mar 28, 2012 at 03:30:33PM +0800, Shawn Guo wrote:
From: Lionel Xu Lionel.Xu@freescale.com
There is no sound in the recorded wav, to enable recording, the VAG should be powered up, and the mic bias resistor should be set up with proper value.
Signed-off-by: Lionel Xu lionel.xu@freescale.com Signed-off-by: Shawn Guo shawn.guo@linaro.org Cc: Zeng Zhaoming zengzm.kernel@gmail.com
sound/soc/codecs/sgtl5000.c | 14 +++++++++++--- 1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index d192626..a24299c 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -132,11 +132,18 @@ static int mic_bias_event(struct snd_soc_dapm_widget *w, snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL, SGTL5000_BIAS_R_MASK, SGTL5000_BIAS_R_4k << SGTL5000_BIAS_R_SHIFT);
snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,SGTL5000_VAG_POWERUP, SGTL5000_VAG_POWERUP);
Only enable SGTL5000_VAG_POWERUP for mic bias_event may not be sufficient. IIRC for line-in record, we also need to enable VAG_POWER. Will verify it later when i'm free.
Regards Dong Aisheng
break;case SND_SOC_DAPM_PRE_PMD: snd_soc_update_bits(w->codec, SGTL5000_CHIP_MIC_CTRL,
SGTL5000_BIAS_R_MASK, 0);
SGTL5000_BIAS_R_MASK,SGTL5000_BIAS_R_off << SGTL5000_BIAS_R_SHIFT);snd_soc_update_bits(w->codec, SGTL5000_CHIP_ANA_POWER,SGTL5000_VAG_POWERUP, 0);@@ -197,7 +204,7 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { SND_SOC_DAPM_OUTPUT("HP_OUT"), SND_SOC_DAPM_OUTPUT("LINE_OUT"),
- SND_SOC_DAPM_MICBIAS_E("Mic Bias", SGTL5000_CHIP_MIC_CTRL, 8, 0,
- SND_SOC_DAPM_MICBIAS_E("Mic Bias", SND_SOC_NOPM, 0, 0, mic_bias_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
@@ -229,7 +236,8 @@ static const struct snd_soc_dapm_widget sgtl5000_dapm_widgets[] = { /* routes for sgtl5000 */ static const struct snd_soc_dapm_route sgtl5000_dapm_routes[] = { {"Capture Mux", "LINE_IN", "LINE_IN"}, /* line_in --> adc_mux */
- {"Capture Mux", "MIC_IN", "MIC_IN"}, /* mic_in --> adc_mux */
{"Mic Bias", NULL, "MIC_IN"}, /* mic_in --> mic bias */
{"Capture Mux", "MIC_IN", "Mic Bias"}, /* mic bias --> adc_mux */
{"ADC", NULL, "Capture Mux"}, /* adc_mux --> adc */ {"AIFOUT", NULL, "ADC"}, /* adc --> i2s_out */
-- 1.7.4.1
Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel