Takashi Iwai wrote:
At Tue, 12 Jun 2007 23:49:23 -0700, Eran Guendelman wrote:
So, we need to add a new model. Could you give the output of "lspci -nv", too? We need PCI SSID to identify the device. Then I can write a patch to try.
00:1b.0 Class 0403: 8086:27d8 (rev 01) Subsystem: 1028:01d7 Flags: bus master, fast devsel, latency 0, IRQ 233 Memory at efffc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Capabilities: [70] Express Unknown type IRQ 0 Capabilities: [100] Virtual Channel Capabilities: [130] Unknown (5)
OK, looks fine. Did you try my patch?
Sorry for the delayed reply... Yup, just tried it out and it works. Thanks.
- Does the snd_hda_intel driver currently (or will it eventually)
support dynamic switching so I can switch from the Mic In to Line In or to Rear Speakers Out, etc, just like in the Windows driver?
Hm? It should have already the switches, "Line In As Output" and "Mic As Output"...
I did see those when I tried the 3stack mode, but in my current fix (modifying "ref" with my pin configs) I don't get such options in the mixer. Any idea what I would need to do to get it to add these switches to the mixer? This is the output from "amixer controls"
numid=8,iface=MIXER,name='Master Playback Switch' numid=7,iface=MIXER,name='Master Playback Volume' numid=13,iface=MIXER,name='PCM Playback Volume' numid=6,iface=MIXER,name='Front Playback Switch' numid=5,iface=MIXER,name='Front Playback Volume' numid=3,iface=MIXER,name='Capture Switch' numid=2,iface=MIXER,name='Capture Volume' numid=9,iface=MIXER,name='IEC958 Playback Con Mask' numid=10,iface=MIXER,name='IEC958 Playback Pro Mask' numid=11,iface=MIXER,name='IEC958 Playback Default' numid=12,iface=MIXER,name='IEC958 Playback Switch' numid=14,iface=MIXER,name='Digital Capture Volume' numid=1,iface=MIXER,name='Input Source' numid=4,iface=MIXER,name='Mux Capture Volume'
Could you show the kernel message regarding pin detections (appearing only when debug options is set)? The mic/line-in output switches appear only when
- line_outs are less than 3 (usually 1)
- line and mic (not fmic or fline) inputs are found
Well, maybe the problem is that it detects an fmic and not a mic. This is because all I did was take the pin configs from the Windows INI (which originally made 0x0c be a Line In at Ext Front), and changed it from a Line In to a Mic, making it a Mic at Ext Front... I'm assuming this makes it an fmic instead of a mic... I don't really understand what the big diff between front and non-front is, but the jacks on the laptop are certainly on the front of the laptop if it's at all related to that...
Actually, even if I made it a non-front mic, it will fail to find a Line In anyway because I've effectively replaced it by a Mic, no? So the test for having mic/line-in output switches will fail...
Anyway, here's the debug output when loading the driver:
ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:1810: hda_codec: model 'dell' is selected ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0a pin config 0221121e ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0b pin config 408103ff ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0c pin config 02a1123e ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0d pin config 90100310 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0e pin config 408003f1 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 0f pin config 0221122f ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 10 pin config 03451340 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 11 pin config 40c003f2 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 15 pin config 50a003f3 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:843: hda_codec: pin nid 1b pin config 405003f4 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2339: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2343: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2347: hp_outs=2 (0xa/0xf/0x0/0x0/0x0) ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/hda_codec.c:2355: inputs: mic=0x0, fmic=0xc, line=0x0, fline=0x0, cd=0x0, aux=0x0 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1153: stac92xx_add_dyn_out_pins: total dac count=4 ALSA /home/erang/install/alsa-driver-1.0.14/pci/hda/../../alsa-kernel/pci/hda/patch_sigmatel.c:1264: dac_nids=1 (0x2/0x0/0x0/0x0/0x0)