Hi, Any progress on 6935G? Not even latest alsa-snapshot is able to get jack detection and mic working. Controls wrongly mapped as usual.
Regards and Thanks, Karthik
On Sat, Jun 6, 2009 at 11:20 AM, Emilio López buhitoescolar@gmail.comwrote:
Takashi, were you able to have a look at it? Any idea on what might be going on? I guess this is an easy to fix issue, as it worked with the old mode, the channel might just need registering or something.
Thanks!
2009/5/29 Emilio López buhitoescolar@gmail.com
2009/5/27 Takashi Iwai tiwai@suse.de
At Wed, 27 May 2009 22:54:09 +0200, I wrote:
At Wed, 27 May 2009 16:27:00 -0300, Emilio López wrote:
Did my last email arrive? Any idea on what might be going on?
Sorry, no time for this right now. It's usually just a missing channel connection or the lack of the corresponding amp control. In most cases, it's trivial if someone with a knowledge of HD-audio spec sees it...
Just took a quick look now, I found that you didn't unmute "Side Playback Switch" in the disabled case. Do you mean that as "disabled"?
Disabled = Muted = Off, Enabled = Unmuted = On. So sound works on enabled, doesn't work on disabled.
I assume that these files are from the "old" driver with the bass working as Side volume. Is it correct?
Yes
thanks,
Takashi
Thanks for having a look at it :)
Emilio
Takashi
Emilio
2009/5/24 Emilio López buhitoescolar@gmail.com
Well, it seems my last email was too heavy with the 4 files
attached. I
have uploaded them to drop.io, here is the link: http://drop.io/ alsaonaceraspire6930 Thanks! 2009/5/23 Emilio López <buhitoescolar@gmail.com> Here you are, I ran alsa-info.sh in the old alsa (with
model=acer) and
saved the output of the script when side was enabled and
disabled,
with volumes 0 and 100. Hope you can work out the problem
with this,
do not hesitate to ask for more debug info if you need. Thanks for all! Emilio PS: On my previous email (cited below) I wrote "Mic sensing" incorrectly, I wanted to write "headphones sensing". 2009/5/23 Takashi Iwai <tiwai@suse.de> At Sat, 23 May 2009 12:19:12 -0300, Emilio López wrote: > > I reinstalled 1.0.20 today and almost everything
started working
when I set > model=acer-aspire-4930g. Mic sensing works, my mic now
records
too. But my > bass does not, and I cannot control it with "Side"
anymore.
> > Any idea on how to fix it? The audio setup for this
laptop will
be fully > working when I get the bass to play once again. Could you check with the older version and what "Side"
control
changes in hd-audio codec registers? You can just get
alsa-info.sh output
before and after changing the "Side" control value. thanks, Takashi