The devm_clk_get_optional() helper returns NULL when devm_clk_get() returns -ENOENT. This makes things slightly cleaner. The added benefit is mostly cosmetic.
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com --- sound/soc/intel/boards/bytcr_rt5651.c | 69 ++++++++++++--------------- 1 file changed, 30 insertions(+), 39 deletions(-)
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c index 36f63516f0cb..28c561302e69 100644 --- a/sound/soc/intel/boards/bytcr_rt5651.c +++ b/sound/soc/intel/boards/bytcr_rt5651.c @@ -188,13 +188,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, }
if (SND_SOC_DAPM_EVENT_ON(event)) { - if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { - ret = clk_prepare_enable(priv->mclk); - if (ret < 0) { - dev_err(card->dev, - "could not configure MCLK state"); - return ret; - } + ret = clk_prepare_enable(priv->mclk); + if (ret < 0) { + dev_err(card->dev, "could not configure MCLK state"); + return ret; } ret = byt_rt5651_prepare_and_enable_pll1(codec_dai, 48000, 50); } else { @@ -207,8 +204,7 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w, 48000 * 512, SND_SOC_CLOCK_IN); if (!ret) - if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) - clk_disable_unprepare(priv->mclk); + clk_disable_unprepare(priv->mclk); }
if (ret < 0) { @@ -629,29 +625,25 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime) return ret; }
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { - /* - * The firmware might enable the clock at - * boot (this information may or may not - * be reflected in the enable clock register). - * To change the rate we must disable the clock - * first to cover these cases. Due to common - * clock framework restrictions that do not allow - * to disable a clock that has not been enabled, - * we need to enable the clock first. - */ - ret = clk_prepare_enable(priv->mclk); - if (!ret) - clk_disable_unprepare(priv->mclk); + /* + * The firmware might enable the clock at boot (this information + * may or may not be reflected in the enable clock register). + * To change the rate we must disable the clock first to cover + * these cases. Due to common clock framework restrictions that + * do not allow to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(priv->mclk); + if (!ret) + clk_disable_unprepare(priv->mclk);
- if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) - ret = clk_set_rate(priv->mclk, 25000000); - else - ret = clk_set_rate(priv->mclk, 19200000); + if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ) + ret = clk_set_rate(priv->mclk, 25000000); + else + ret = clk_set_rate(priv->mclk, 19200000);
- if (ret) - dev_err(card->dev, "unable to set MCLK rate\n"); - } + if (ret) + dev_err(card->dev, "unable to set MCLK rate\n");
report = 0; if (BYT_RT5651_JDSRC(byt_rt5651_quirk)) @@ -1064,21 +1056,20 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev) byt_rt5651_dais[dai_index].cpus->dai_name = "ssp0-port";
if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) { - priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3"); + priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3"); if (IS_ERR(priv->mclk)) { ret_val = PTR_ERR(priv->mclk); dev_err(dev, "Failed to get MCLK from pmc_plt_clk_3: %d\n", ret_val); - /* - * Fall back to bit clock usage for -ENOENT (clock not - * available likely due to missing dependencies), bail - * for all other errors, including -EPROBE_DEFER - */ - if (ret_val != -ENOENT) - goto err; - byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; + goto err; } + /* + * Fall back to bit clock usage when clock is not + * available likely due to missing dependencies. + */ + if (!priv->mclk) + byt_rt5651_quirk &= ~BYT_RT5651_MCLK_EN; }
snprintf(byt_rt5651_components, sizeof(byt_rt5651_components),