On Mon, Jan 18, 2016 at 7:26 AM, Arnaud Mouiche arnaud.mouiche@invoxia.com wrote:
If the capture is already running while playback is started, it is highly probable (>80% in a 8 channels scenario) that samples are lost between the DMA and TX fifo.
The reason is that SIER.TDMAE is set before STCR.TFEN0, leaving a time window where the FIFO doesn't receive the samples written by the DMA.
This particular case happened only if capture is already enabled as SCR.SSIEN is already set at the playback startup instant.
Signed-off-by: Arnaud Mouiche arnaud.mouiche@invoxia.com
sound/soc/fsl/fsl_ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c index 13613fd..c9ba8ca 100644 --- a/sound/soc/fsl/fsl_ssi.c +++ b/sound/soc/fsl/fsl_ssi.c @@ -488,9 +488,9 @@ static void fsl_ssi_config(struct fsl_ssi_private *ssi_private, bool enable, * (online configuration) */ if (enable) {
regmap_update_bits(regs, CCSR_SSI_SIER, vals->sier, vals->sier); regmap_update_bits(regs, CCSR_SSI_SRCR, vals->srcr, vals->srcr); regmap_update_bits(regs, CCSR_SSI_STCR, vals->stcr, vals->stcr);
regmap_update_bits(regs, CCSR_SSI_SIER, vals->sier, vals->sier); } else { u32 sier; u32 srcr;-- 1.9.1
Tested-By: Caleb Crome caleb@crome.org Reviewed-"By: Caleb Crome caleb@crome.org