At Mon, 18 Aug 2008 10:50:15 +0200, Rene Herman wrote:
On 17-08-08 22:38, Krzysztof Helt wrote:
From: Krzysztof Helt krzysztof.h1@wp.pl
Mute sound by setting mute bit without setting volume to 0. It makes both source code and binary shorter.
Signed-off-by: Krzysztof Helt krzysztof.h1@wp.pl
Grmmbbled-over-by: Rene Herman rene.herman@gmail.com
This should be safe and the current function indeed generates crap code
but in the sense of always expecting the worst broken hardware variants
to be out there I must say I'd rather have seen that GCC were beter. But
yes, sure.
Yeah, the slightest concern is the intention of using 0x80 there. If this patch was already tested on some real hardwares (and I guess it should work), I'm willing to apply it. Krzystof, was this tested on your machines?
I have tested it only on cs4236 (inside laptop) and opti931 I have in the old PC at the moment. If you want I can retest on more hardware.
The second check I noticed that for some registers the volume is defined as gain (so 0 is the least audible) and for some (CS4231_MONO_CTRL, CS4231_LEFT/RIGHT_OUTPUT) is defined as attentuation (the 0 is the most audible). In two cases, the old code set volume to the loudest and mute it with mute bit, probably the opposite what was intended.
It is not a crucial patch. You may drop it.
Regards, Krzysztof
---------------------------------------------------------------------- Wygraj laptopa lub iPoda! Wez udzial w igrzyskach! Kliknij >>> http://link.interia.pl/f1eda