2013-3-1 上午1:23 於 "Arkadiusz Miśkiewicz" arekm@maven.pl 寫道：
On Thursday 28 of February 2013, David Henningsson wrote:
On 02/27/2013 06:58 PM, Arkadiusz Miśkiewicz wrote:
Hi,
My Thinkpad T400 (2764CTO model) doesn't have ability to set CAPTURE
on
microphone inputs with alsa. Most likely some quirk is missing.
The laptop has internal microphone, microphone in input, headphones
out
output and 2 internal speakers. That's all.
Is uses Conexant CX20561_15Z internally and there is detailed T400 schematic available: http://kythuatphancung.com/download/lenovo-thinkpad-t400-schematic- diagram.html?dl (for audio look around page 43).
Kernels 3.7.x, fresh 3.8 - no luck. Tried even linux-next from today
but
it dies early on alsa unrelated issues.
I've tried model options laptop, hp, hp-dv6736, hp-700, toshiba,
ideapad,
auto. None of these work fine. With model=hp-700 I can set CAPTURE
but it
doesn't work (silent audio is captured using arecord or in google hangout). External mic connected also doesn't work with these setups.
http://www.alsa-project.org/db/?f=394ff4cdca33e75c8a47203d42b89d8de36deca
7 [3.8 kernel]
http://www.alsa-project.org/db/?f=302877e50f99835075d038207f6db0dfd89873b
0 [3.7 kernel]
Thinkpad is 2764CTO model exactly.
I can test various hacks, patches etc easily. Could someone look at schematic and provide quirks to test?
Hi,
What do you mean with "doesn't have ability to set CAPTURE"?
On some other notebook I had mic input that I could set to CAPTURE mode
using
space in alsamixer F4: Capture menu. Here I can't set capture on any of
inputs
(pressing space causes no change).
What input is used is automatically selected depending on what you have plugged in, and its level is set using mixer controls (which in your alsa-info is set to minimum levels).
There are two jack sockets in this laptop, one with headphones icon and
other
with mic icon (on the laptop case itself) as on this photo: http://www.notebookreview.com/shared/picture.asp?f=42200
Ok... maxing all mixer controls and connecting external microphone I get external mic being recorded. The mixer controls that seem to be working in such mode are: "Mic", "Mic boost" and "Digital". What's weird is that when "Digitial" is set to 0 then no sound from microphone is being recorded (testing with arecord -f cd | aplay). The "Mic" and "Mic boost" seems to
work
as expectedf. Question: why "Digital" has any influence here?
Unfortunately I'm unable to get internal microphone working at all. Even
with
all outputs set to maximum like this:
http://www.alsa-project.org/db/?f=9a7e1ca68b2f2fa2f77dce6ead2b5fb158b74652
Internal mic is my primary problem.
Do you mean dynamic adc switch does not work as expected or "Dock mic capture volume" and "internal Michael capture volume" controls cannot share the same amp in ?
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Dock Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=1, ofs=0 Control: name="Internal Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Device: name="CONEXANT Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x50 0x50] [0x50 0x50] Converter: stream=4, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 2 0x1d* 0x17 Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L Control: name="Mic Capture Volume", index=0, device=0 ControlAmp: chs=3, dir=In, idx=0, ofs=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=0 Amp-In vals: [0x50 0x50] Converter: stream=0, channel=0 SDI-Select: 0 PCM: rates [0x160]: 44100 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 Power: setting=D0, actual=D0 Connection: 1 0x18