It has been replaced with the newer Ingenic NAND driver.
Signed-off-by: Paul Cercueil paul@crapouillou.net Tested-by: Artur Rojek contact@artur-rojek.eu --- drivers/mtd/nand/raw/ingenic/Kconfig | 7 - drivers/mtd/nand/raw/ingenic/Makefile | 1 - drivers/mtd/nand/raw/ingenic/jz4740_nand.c | 536 --------------------- 3 files changed, 544 deletions(-) delete mode 100644 drivers/mtd/nand/raw/ingenic/jz4740_nand.c
diff --git a/drivers/mtd/nand/raw/ingenic/Kconfig b/drivers/mtd/nand/raw/ingenic/Kconfig index 66b7cffdb0c2..e30feb56b650 100644 --- a/drivers/mtd/nand/raw/ingenic/Kconfig +++ b/drivers/mtd/nand/raw/ingenic/Kconfig @@ -1,11 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -config MTD_NAND_JZ4740 - tristate "JZ4740 NAND controller" - depends on MACH_JZ4740 || COMPILE_TEST - depends on HAS_IOMEM - help - Enables support for NAND Flash on JZ4740 SoC based boards. - config MTD_NAND_JZ4780 tristate "JZ4780 NAND controller" depends on JZ4780_NEMC diff --git a/drivers/mtd/nand/raw/ingenic/Makefile b/drivers/mtd/nand/raw/ingenic/Makefile index b63d36889263..4c53f5e759c3 100644 --- a/drivers/mtd/nand/raw/ingenic/Makefile +++ b/drivers/mtd/nand/raw/ingenic/Makefile @@ -1,5 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_JZ4780) += ingenic_nand.o
ingenic_nand-y += ingenic_nand_drv.o diff --git a/drivers/mtd/nand/raw/ingenic/jz4740_nand.c b/drivers/mtd/nand/raw/ingenic/jz4740_nand.c deleted file mode 100644 index acdf674fcc87..000000000000 --- a/drivers/mtd/nand/raw/ingenic/jz4740_nand.c +++ /dev/null @@ -1,536 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009-2010, Lars-Peter Clausen lars@metafoo.de - * JZ4740 SoC NAND controller driver - */ - -#include <linux/io.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/rawnand.h> -#include <linux/mtd/partitions.h> - -#include <linux/gpio/consumer.h> - -#include <linux/platform_data/jz4740/jz4740_nand.h> - -#define JZ_REG_NAND_CTRL 0x50 -#define JZ_REG_NAND_ECC_CTRL 0x100 -#define JZ_REG_NAND_DATA 0x104 -#define JZ_REG_NAND_PAR0 0x108 -#define JZ_REG_NAND_PAR1 0x10C -#define JZ_REG_NAND_PAR2 0x110 -#define JZ_REG_NAND_IRQ_STAT 0x114 -#define JZ_REG_NAND_IRQ_CTRL 0x118 -#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2)) - -#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4) -#define JZ_NAND_ECC_CTRL_ENCODING BIT(3) -#define JZ_NAND_ECC_CTRL_RS BIT(2) -#define JZ_NAND_ECC_CTRL_RESET BIT(1) -#define JZ_NAND_ECC_CTRL_ENABLE BIT(0) - -#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29)) -#define JZ_NAND_STATUS_PAD_FINISH BIT(4) -#define JZ_NAND_STATUS_DEC_FINISH BIT(3) -#define JZ_NAND_STATUS_ENC_FINISH BIT(2) -#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1) -#define JZ_NAND_STATUS_ERROR BIT(0) - -#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1) -#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1) -#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa - -#define JZ_NAND_MEM_CMD_OFFSET 0x08000 -#define JZ_NAND_MEM_ADDR_OFFSET 0x10000 - -struct jz_nand { - struct nand_chip chip; - void __iomem *base; - struct resource *mem; - - unsigned char banks[JZ_NAND_NUM_BANKS]; - void __iomem *bank_base[JZ_NAND_NUM_BANKS]; - struct resource *bank_mem[JZ_NAND_NUM_BANKS]; - - int selected_bank; - - struct gpio_desc *busy_gpio; - bool is_reading; -}; - -static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd) -{ - return container_of(mtd_to_nand(mtd), struct jz_nand, chip); -} - -static void jz_nand_select_chip(struct nand_chip *chip, int chipnr) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - uint32_t ctrl; - int banknr; - - ctrl = readl(nand->base + JZ_REG_NAND_CTRL); - ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK; - - if (chipnr == -1) { - banknr = -1; - } else { - banknr = nand->banks[chipnr] - 1; - chip->legacy.IO_ADDR_R = nand->bank_base[banknr]; - chip->legacy.IO_ADDR_W = nand->bank_base[banknr]; - } - writel(ctrl, nand->base + JZ_REG_NAND_CTRL); - - nand->selected_bank = banknr; -} - -static void jz_nand_cmd_ctrl(struct nand_chip *chip, int dat, - unsigned int ctrl) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - uint32_t reg; - void __iomem *bank_base = nand->bank_base[nand->selected_bank]; - - BUG_ON(nand->selected_bank < 0); - - if (ctrl & NAND_CTRL_CHANGE) { - BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE)); - if (ctrl & NAND_ALE) - bank_base += JZ_NAND_MEM_ADDR_OFFSET; - else if (ctrl & NAND_CLE) - bank_base += JZ_NAND_MEM_CMD_OFFSET; - chip->legacy.IO_ADDR_W = bank_base; - - reg = readl(nand->base + JZ_REG_NAND_CTRL); - if (ctrl & NAND_NCE) - reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank); - else - reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank); - writel(reg, nand->base + JZ_REG_NAND_CTRL); - } - if (dat != NAND_CMD_NONE) - writeb(dat, chip->legacy.IO_ADDR_W); -} - -static int jz_nand_dev_ready(struct nand_chip *chip) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - return gpiod_get_value_cansleep(nand->busy_gpio); -} - -static void jz_nand_hwctl(struct nand_chip *chip, int mode) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - uint32_t reg; - - writel(0, nand->base + JZ_REG_NAND_IRQ_STAT); - reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); - - reg |= JZ_NAND_ECC_CTRL_RESET; - reg |= JZ_NAND_ECC_CTRL_ENABLE; - reg |= JZ_NAND_ECC_CTRL_RS; - - switch (mode) { - case NAND_ECC_READ: - reg &= ~JZ_NAND_ECC_CTRL_ENCODING; - nand->is_reading = true; - break; - case NAND_ECC_WRITE: - reg |= JZ_NAND_ECC_CTRL_ENCODING; - nand->is_reading = false; - break; - default: - break; - } - - writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); -} - -static int jz_nand_calculate_ecc_rs(struct nand_chip *chip, const uint8_t *dat, - uint8_t *ecc_code) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - uint32_t reg, status; - int i; - unsigned int timeout = 1000; - static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4, - 0x8b, 0xff, 0xb7, 0x6f}; - - if (nand->is_reading) - return 0; - - do { - status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); - } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout); - - if (timeout == 0) - return -1; - - reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); - reg &= ~JZ_NAND_ECC_CTRL_ENABLE; - writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); - - for (i = 0; i < 9; ++i) - ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i); - - /* If the written data is completly 0xff, we also want to write 0xff as - * ecc, otherwise we will get in trouble when doing subpage writes. */ - if (memcmp(ecc_code, empty_block_ecc, 9) == 0) - memset(ecc_code, 0xff, 9); - - return 0; -} - -static void jz_nand_correct_data(uint8_t *dat, int index, int mask) -{ - int offset = index & 0x7; - uint16_t data; - - index += (index >> 3); - - data = dat[index]; - data |= dat[index+1] << 8; - - mask ^= (data >> offset) & 0x1ff; - data &= ~(0x1ff << offset); - data |= (mask << offset); - - dat[index] = data & 0xff; - dat[index+1] = (data >> 8) & 0xff; -} - -static int jz_nand_correct_ecc_rs(struct nand_chip *chip, uint8_t *dat, - uint8_t *read_ecc, uint8_t *calc_ecc) -{ - struct jz_nand *nand = mtd_to_jz_nand(nand_to_mtd(chip)); - int i, error_count, index; - uint32_t reg, status, error; - unsigned int timeout = 1000; - - for (i = 0; i < 9; ++i) - writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i); - - reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); - reg |= JZ_NAND_ECC_CTRL_PAR_READY; - writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); - - do { - status = readl(nand->base + JZ_REG_NAND_IRQ_STAT); - } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout); - - if (timeout == 0) - return -ETIMEDOUT; - - reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL); - reg &= ~JZ_NAND_ECC_CTRL_ENABLE; - writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL); - - if (status & JZ_NAND_STATUS_ERROR) { - if (status & JZ_NAND_STATUS_UNCOR_ERROR) - return -EBADMSG; - - error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29; - - for (i = 0; i < error_count; ++i) { - error = readl(nand->base + JZ_REG_NAND_ERR(i)); - index = ((error >> 16) & 0x1ff) - 1; - if (index >= 0 && index < 512) - jz_nand_correct_data(dat, index, error & 0x1ff); - } - - return error_count; - } - - return 0; -} - -static int jz_nand_ioremap_resource(struct platform_device *pdev, - const char *name, struct resource **res, void __iomem **base) -{ - int ret; - - *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name); - if (!*res) { - dev_err(&pdev->dev, "Failed to get platform %s memory\n", name); - ret = -ENXIO; - goto err; - } - - *res = request_mem_region((*res)->start, resource_size(*res), - pdev->name); - if (!*res) { - dev_err(&pdev->dev, "Failed to request %s memory region\n", name); - ret = -EBUSY; - goto err; - } - - *base = ioremap((*res)->start, resource_size(*res)); - if (!*base) { - dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name); - ret = -EBUSY; - goto err_release_mem; - } - - return 0; - -err_release_mem: - release_mem_region((*res)->start, resource_size(*res)); -err: - *res = NULL; - *base = NULL; - return ret; -} - -static inline void jz_nand_iounmap_resource(struct resource *res, - void __iomem *base) -{ - iounmap(base); - release_mem_region(res->start, resource_size(res)); -} - -static int jz_nand_detect_bank(struct platform_device *pdev, - struct jz_nand *nand, unsigned char bank, - size_t chipnr, uint8_t *nand_maf_id, - uint8_t *nand_dev_id) -{ - int ret; - char res_name[6]; - uint32_t ctrl; - struct nand_chip *chip = &nand->chip; - struct mtd_info *mtd = nand_to_mtd(chip); - struct nand_memory_organization *memorg; - u8 id[2]; - - memorg = nanddev_get_memorg(&chip->base); - - /* Request I/O resource. */ - sprintf(res_name, "bank%d", bank); - ret = jz_nand_ioremap_resource(pdev, res_name, - &nand->bank_mem[bank - 1], - &nand->bank_base[bank - 1]); - if (ret) - return ret; - - /* Enable chip in bank. */ - ctrl = readl(nand->base + JZ_REG_NAND_CTRL); - ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1); - writel(ctrl, nand->base + JZ_REG_NAND_CTRL); - - if (chipnr == 0) { - /* Detect first chip. */ - ret = nand_scan(chip, 1); - if (ret) - goto notfound_id; - - /* Retrieve the IDs from the first chip. */ - nand_select_target(chip, 0); - nand_reset_op(chip); - nand_readid_op(chip, 0, id, sizeof(id)); - *nand_maf_id = id[0]; - *nand_dev_id = id[1]; - } else { - /* Detect additional chip. */ - nand_select_target(chip, chipnr); - nand_reset_op(chip); - nand_readid_op(chip, 0, id, sizeof(id)); - if (*nand_maf_id != id[0] || *nand_dev_id != id[1]) { - ret = -ENODEV; - goto notfound_id; - } - - /* Update size of the MTD. */ - memorg->ntargets++; - mtd->size += nanddev_target_size(&chip->base); - } - - dev_info(&pdev->dev, "Found chip %zu on bank %i\n", chipnr, bank); - return 0; - -notfound_id: - dev_info(&pdev->dev, "No chip found on bank %i\n", bank); - ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1)); - writel(ctrl, nand->base + JZ_REG_NAND_CTRL); - jz_nand_iounmap_resource(nand->bank_mem[bank - 1], - nand->bank_base[bank - 1]); - return ret; -} - -static int jz_nand_attach_chip(struct nand_chip *chip) -{ - struct mtd_info *mtd = nand_to_mtd(chip); - struct device *dev = mtd->dev.parent; - struct jz_nand_platform_data *pdata = dev_get_platdata(dev); - struct platform_device *pdev = to_platform_device(dev); - - if (pdata && pdata->ident_callback) - pdata->ident_callback(pdev, mtd, &pdata->partitions, - &pdata->num_partitions); - - return 0; -} - -static const struct nand_controller_ops jz_nand_controller_ops = { - .attach_chip = jz_nand_attach_chip, -}; - -static int jz_nand_probe(struct platform_device *pdev) -{ - int ret; - struct jz_nand *nand; - struct nand_chip *chip; - struct mtd_info *mtd; - struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev); - size_t chipnr, bank_idx; - uint8_t nand_maf_id = 0, nand_dev_id = 0; - - nand = kzalloc(sizeof(*nand), GFP_KERNEL); - if (!nand) - return -ENOMEM; - - ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base); - if (ret) - goto err_free; - - nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN); - if (IS_ERR(nand->busy_gpio)) { - ret = PTR_ERR(nand->busy_gpio); - dev_err(&pdev->dev, "Failed to request busy gpio %d\n", - ret); - goto err_iounmap_mmio; - } - - chip = &nand->chip; - mtd = nand_to_mtd(chip); - mtd->dev.parent = &pdev->dev; - mtd->name = "jz4740-nand"; - - chip->ecc.hwctl = jz_nand_hwctl; - chip->ecc.calculate = jz_nand_calculate_ecc_rs; - chip->ecc.correct = jz_nand_correct_ecc_rs; - chip->ecc.mode = NAND_ECC_HW_OOB_FIRST; - chip->ecc.size = 512; - chip->ecc.bytes = 9; - chip->ecc.strength = 4; - chip->ecc.options = NAND_ECC_GENERIC_ERASED_CHECK; - - chip->legacy.chip_delay = 50; - chip->legacy.cmd_ctrl = jz_nand_cmd_ctrl; - chip->legacy.select_chip = jz_nand_select_chip; - chip->legacy.dummy_controller.ops = &jz_nand_controller_ops; - - if (nand->busy_gpio) - chip->legacy.dev_ready = jz_nand_dev_ready; - - platform_set_drvdata(pdev, nand); - - /* We are going to autodetect NAND chips in the banks specified in the - * platform data. Although nand_scan_ident() can detect multiple chips, - * it requires those chips to be numbered consecuitively, which is not - * always the case for external memory banks. And a fixed chip-to-bank - * mapping is not practical either, since for example Dingoo units - * produced at different times have NAND chips in different banks. - */ - chipnr = 0; - for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) { - unsigned char bank; - - /* If there is no platform data, look for NAND in bank 1, - * which is the most likely bank since it is the only one - * that can be booted from. - */ - bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1; - if (bank == 0) - break; - if (bank > JZ_NAND_NUM_BANKS) { - dev_warn(&pdev->dev, - "Skipping non-existing bank: %d\n", bank); - continue; - } - /* The detection routine will directly or indirectly call - * jz_nand_select_chip(), so nand->banks has to contain the - * bank we're checking. - */ - nand->banks[chipnr] = bank; - if (jz_nand_detect_bank(pdev, nand, bank, chipnr, - &nand_maf_id, &nand_dev_id) == 0) - chipnr++; - else - nand->banks[chipnr] = 0; - } - if (chipnr == 0) { - dev_err(&pdev->dev, "No NAND chips found\n"); - goto err_iounmap_mmio; - } - - ret = mtd_device_register(mtd, pdata ? pdata->partitions : NULL, - pdata ? pdata->num_partitions : 0); - - if (ret) { - dev_err(&pdev->dev, "Failed to add mtd device\n"); - goto err_cleanup_nand; - } - - dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n"); - - return 0; - -err_cleanup_nand: - nand_cleanup(chip); - while (chipnr--) { - unsigned char bank = nand->banks[chipnr]; - jz_nand_iounmap_resource(nand->bank_mem[bank - 1], - nand->bank_base[bank - 1]); - } - writel(0, nand->base + JZ_REG_NAND_CTRL); -err_iounmap_mmio: - jz_nand_iounmap_resource(nand->mem, nand->base); -err_free: - kfree(nand); - return ret; -} - -static int jz_nand_remove(struct platform_device *pdev) -{ - struct jz_nand *nand = platform_get_drvdata(pdev); - size_t i; - - nand_release(&nand->chip); - - /* Deassert and disable all chips */ - writel(0, nand->base + JZ_REG_NAND_CTRL); - - for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) { - unsigned char bank = nand->banks[i]; - if (bank != 0) { - jz_nand_iounmap_resource(nand->bank_mem[bank - 1], - nand->bank_base[bank - 1]); - } - } - - jz_nand_iounmap_resource(nand->mem, nand->base); - - kfree(nand); - - return 0; -} - -static struct platform_driver jz_nand_driver = { - .probe = jz_nand_probe, - .remove = jz_nand_remove, - .driver = { - .name = "jz4740-nand", - }, -}; - -module_platform_driver(jz_nand_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Lars-Peter Clausen lars@metafoo.de"); -MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC"); -MODULE_ALIAS("platform:jz4740-nand");