Add devicetree support for phycore-ac97 driver.
platform_of_node and cpu_of_node are set according to the fsl,audmux phandle.
This patch adds handling of ac97 reset functions according to fsl ac97 support. They are setup from here to avoid board specific code in the generic fsl-ssi driver.
This patch changes the handling of pca100 boards from non-DT to DT only. pcm043 is still handled without DT.
Signed-off-by: Markus Pargmann mpa@pengutronix.de ---
Notes: Changes in v7: - Declare empty ac97 reset functions static. - Replace complicated machine compatible comparison with of_machine_is_compatible - Missing snd_soc_unregister_card in imx_phycore_ac97_remove - Rename driver
Changes in v6: - phycore-ac97 now manages the ac97 reset functions of the boards using this combination of ssi-codec. - Removed preprocessor ifs for DT, non-DT distinction. pcm043 is now non-DT only and pca100 DT only.
Changes in v4: - New property phytec,audmux to check which audmux setup should be executed. Checking for fsl,imx21-audmux and fsl,imx31-audmux.
Changes in v3: - Add some more information in the commit message.
Changes in v2: - Simplify the driver, by combining audmux port configurations. The audmux driver actually knows on which platform he is running and will return the appropriate error code if we use functions for another platform. So we don't need to have the knowledge about it in phycore-ac97 and can try both functions. This removes the need of different compatibilities and renames it to phycore-ac97. - Use a phandle for the cpu_dai link. - Add devicetree binding documentation. - Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
Changes in v2: - Simplify the driver, by combining audmux port configurations. The audmux driver actually knows on which platform he is running and will return the appropriate error code if we use functions for another platform. So we don't need to have the knowledge about it in phycore-ac97 and can try both functions. This removes the need of different compatibilities and renames it to imx27-ac97. - Use a phandle for the cpu_dai link. - Add devicetree binding documentation. - Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
Changes in v7: - Declare empty ac97 reset functions static. - Replace complicated machine compatible comparison with of_machine_is_compatible - Missing snd_soc_unregister_card in imx_phycore_ac97_remove
Changes in v6: - phycore-ac97 now manages the ac97 reset functions of the boards using this combination of ssi-codec. - Removed preprocessor ifs for DT, non-DT distinction. pcm043 is now non-DT only and pca100 DT only.
Changes in v4: - New property phytec,audmux to check which audmux setup should be executed. Checking for fsl,imx21-audmux and fsl,imx31-audmux.
Changes in v3: - Add some more information in the commit message.
Changes in v2: - Simplify the driver, by combining audmux port configurations. The audmux driver actually knows on which platform he is running and will return the appropriate error code if we use functions for another platform. So we don't need to have the knowledge about it in phycore-ac97 and can try both functions. This removes the need of different compatibilities and renames it to phycore-ac97. - Use a phandle for the cpu_dai link. - Add devicetree binding documentation. - Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
Changes in v2: - Simplify the driver, by combining audmux port configurations. The audmux driver actually knows on which platform he is running and will return the appropriate error code if we use functions for another platform. So we don't need to have the knowledge about it in phycore-ac97 and can try both functions. This removes the need of different compatibilities and renames it to imx27-ac97. - Use a phandle for the cpu_dai link. - Add devicetree binding documentation. - Rename binding to phytec,phycore-ac97 and fsl,ssi to phytec,ssi
.../bindings/sound/phytec,phycore-ac97.txt | 14 ++ sound/soc/fsl/phycore-ac97.c | 236 ++++++++++++++++++--- 2 files changed, 224 insertions(+), 26 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt
diff --git a/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt new file mode 100644 index 0000000..41201ff --- /dev/null +++ b/Documentation/devicetree/bindings/sound/phytec,phycore-ac97.txt @@ -0,0 +1,14 @@ +Phytec phycore AC97 + +Required properties: +- compatible: "phytec,phycore-ac97" +- phytec,ssi: A phandle to the ssi device that is connected to ac97. +- phytec,audmux: A phandle to the audmux device. + +Example: + +sound { + compatible = "phytec,phycore-ac97"; + phytec,ssi = <&ssi1>; + phytec,audmux = <&audmux>; +}; diff --git a/sound/soc/fsl/phycore-ac97.c b/sound/soc/fsl/phycore-ac97.c index ae403c2..5eb756c9 100644 --- a/sound/soc/fsl/phycore-ac97.c +++ b/sound/soc/fsl/phycore-ac97.c @@ -20,8 +20,14 @@ #include <asm/mach-types.h>
#include "imx-audmux.h" +#include "fsl_ssi.h" + +#define DRV_NAME "phycore-audio-fabric"
static struct snd_soc_card imx_phycore; +static struct device_node *phycore_dai_cpu_node; +static void (*phycore_ac97_reset) (struct snd_ac97 *ac97); +static void (*phycore_ac97_warm_reset)(struct snd_ac97 *ac97);
static struct snd_soc_ops imx_phycore_hifi_ops = { }; @@ -32,12 +38,12 @@ static struct snd_soc_dai_link imx_phycore_dai_ac97[] = { .stream_name = "HiFi", .codec_dai_name = "wm9712-hifi", .codec_name = "wm9712-codec", - .cpu_dai_name = "imx-ssi.0", - .platform_name = "imx-ssi.0", .ops = &imx_phycore_hifi_ops, }, };
+static const char phycore_ac97_plat_name[] = "imx-ssi.0"; + static struct snd_soc_card imx_phycore = { .name = "PhyCORE-ac97-audio", .owner = THIS_MODULE, @@ -45,40 +51,52 @@ static struct snd_soc_card imx_phycore = { .num_links = ARRAY_SIZE(imx_phycore_dai_ac97), };
-static struct platform_device *imx_phycore_snd_ac97_device; +static void phycore_ac97_imx21_audmux(void) +{ + imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, + IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + IMX_AUDMUX_V1_PCR_TFCSEL(3) | + IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ + IMX_AUDMUX_V1_PCR_RXDSEL(3)); + imx_audmux_v1_configure_port(3, + IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ + IMX_AUDMUX_V1_PCR_TFCSEL(0) | + IMX_AUDMUX_V1_PCR_TFSDIR | + IMX_AUDMUX_V1_PCR_RXDSEL(0)); +} + +static void phycore_ac97_imx31_audmux(void) +{ + imx_audmux_v2_configure_port(3, + IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + IMX_AUDMUX_V2_PTCR_TFSEL(0) | + IMX_AUDMUX_V2_PTCR_TFSDIR, + IMX_AUDMUX_V2_PDCR_RXDSEL(0)); + imx_audmux_v2_configure_port(0, + IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ + IMX_AUDMUX_V2_PTCR_TCSEL(3) | + IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ + IMX_AUDMUX_V2_PDCR_RXDSEL(3)); +} + static struct platform_device *imx_phycore_snd_device;
+static struct platform_device *imx_phycore_snd_ac97_device; + static int __init imx_phycore_init(void) { int ret;
- if (machine_is_pca100()) { - imx_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, - IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - IMX_AUDMUX_V1_PCR_TFCSEL(3) | - IMX_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */ - IMX_AUDMUX_V1_PCR_RXDSEL(3)); - imx_audmux_v1_configure_port(3, - IMX_AUDMUX_V1_PCR_SYN | /* 4wire mode */ - IMX_AUDMUX_V1_PCR_TFCSEL(0) | - IMX_AUDMUX_V1_PCR_TFSDIR | - IMX_AUDMUX_V1_PCR_RXDSEL(0)); - } else if (machine_is_pcm043()) { - imx_audmux_v2_configure_port(3, - IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - IMX_AUDMUX_V2_PTCR_TFSEL(0) | - IMX_AUDMUX_V2_PTCR_TFSDIR, - IMX_AUDMUX_V2_PDCR_RXDSEL(0)); - imx_audmux_v2_configure_port(0, - IMX_AUDMUX_V2_PTCR_SYN | /* 4wire mode */ - IMX_AUDMUX_V2_PTCR_TCSEL(3) | - IMX_AUDMUX_V2_PTCR_TCLKDIR, /* clock is output */ - IMX_AUDMUX_V2_PDCR_RXDSEL(3)); + if (machine_is_pcm043()) { + phycore_ac97_imx31_audmux(); } else { /* return happy. We might run on a totally different machine */ return 0; }
+ imx_phycore_dai_ac97[0].cpu_dai_name = phycore_ac97_plat_name; + imx_phycore_dai_ac97[0].platform_name = phycore_ac97_plat_name; + imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1); if (!imx_phycore_snd_ac97_device) return -ENOMEM; @@ -108,18 +126,184 @@ fail2: platform_device_del(imx_phycore_snd_ac97_device); fail1: platform_device_put(imx_phycore_snd_ac97_device); + imx_phycore_dai_ac97[0].cpu_dai_name = NULL; + imx_phycore_dai_ac97[0].platform_name = NULL; return ret; }
static void __exit imx_phycore_exit(void) { + if (!machine_is_pcm043()) + return; + platform_device_unregister(imx_phycore_snd_device); platform_device_unregister(imx_phycore_snd_ac97_device); + + imx_phycore_dai_ac97[0].cpu_dai_name = NULL; + imx_phycore_dai_ac97[0].platform_name = NULL; }
late_initcall(imx_phycore_init); module_exit(imx_phycore_exit);
+ +static const struct of_device_id imx_phycore_ac97_of_dev_id[] = { + { + .compatible = "phytec,phycore-ac97", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, imx_phycore_ac97_of_dev_id); + + +/* + * Pointer to AC97 reset functions for specific boards + */ +#if IS_ENABLED(CONFIG_MACH_PCA100) +extern void pca100_ac97_cold_reset(struct snd_ac97 *ac97); +extern void pca100_ac97_warm_reset(struct snd_ac97 *ac97); +#else +static void pca100_ac97_cold_reset(struct snd_ac97 *ac97) { } +static void pca100_ac97_warm_reset(struct snd_ac97 *ac97) { } +#endif + +#if IS_ENABLED(CONFIG_MACH_PCM043) +extern void pcm043_ac97_cold_reset(struct snd_ac97 *ac97); +extern void pcm043_ac97_warm_reset(struct snd_ac97 *ac97); +#else +static void pcm043_ac97_cold_reset(struct snd_ac97 *ac97) { } +static void pcm043_ac97_warm_reset(struct snd_ac97 *ac97) { } +#endif + +static void phycore_soc_ac97_reset(struct snd_ac97 *ac97) +{ + if (phycore_ac97_reset) + phycore_ac97_reset(ac97); + /* First read sometimes fails, do a dummy read */ + fsl_ssi_ac97_read(ac97, 0); +} + +static void phycore_soc_ac97_warm_reset(struct snd_ac97 *ac97) +{ + if (phycore_ac97_warm_reset) + phycore_ac97_warm_reset(ac97); + + /* First read sometimes fails, do a dummy read */ + fsl_ssi_ac97_read(ac97, 0); +} + +static int phycore_ac97_setup_devices(struct platform_device *pdev) +{ + int ret; + + imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1); + if (!imx_phycore_snd_device) + return -ENOMEM; + + ret = platform_device_add(imx_phycore_snd_device); + if (ret) { + dev_err(&pdev->dev, "ASoC: Platform device allocation failed\n"); + goto fail1; + } + + ret = snd_soc_register_card(&imx_phycore); + if (ret) { + dev_err(&pdev->dev, "ASoC: soc card registration failed\n"); + goto fail2; + } + return 0; + +fail2: + platform_device_del(imx_phycore_snd_device); +fail1: + platform_device_put(imx_phycore_snd_device); + return ret; +} + +static int imx_phycore_ac97_probe(struct platform_device *pdev) +{ + int ret; + struct device_node *ssi_np; + struct device_node *audmux_np; + + imx_phycore.dev = &pdev->dev; + + audmux_np = of_parse_phandle(pdev->dev.of_node, "phytec,audmux", 0); + if (!audmux_np) { + dev_err(&pdev->dev, "Failed to parse phytec,audmux phandle\n"); + return -EINVAL; + } + + if (of_device_is_compatible(audmux_np, "fsl,imx21-audmux")) { + phycore_ac97_imx21_audmux(); + } else if (of_device_is_compatible(audmux_np, "fsl,imx31-audmux")) { + phycore_ac97_imx31_audmux(); + } else { + dev_err(&pdev->dev, "Unknown audmux, failed to setup audmux\n"); + of_node_put(audmux_np); + return -EINVAL; + } + of_node_put(audmux_np); + + ssi_np = of_parse_phandle(pdev->dev.of_node, "phytec,ssi", 0); + if (!ssi_np) { + dev_err(&pdev->dev, "No valid ssi phandle found\n"); + return -EINVAL; + } + + imx_phycore_dai_ac97[0].cpu_of_node = ssi_np; + imx_phycore_dai_ac97[0].platform_of_node = ssi_np; + phycore_dai_cpu_node = ssi_np; + + if (of_machine_is_compatible("phytec,imx27-pca100")) { + phycore_ac97_reset = pca100_ac97_cold_reset; + phycore_ac97_warm_reset = pca100_ac97_warm_reset; + } else if (of_machine_is_compatible("phytec,imx35-pcm043")) { + phycore_ac97_reset = pcm043_ac97_cold_reset; + phycore_ac97_warm_reset = pcm043_ac97_warm_reset; + } else { + dev_err(&pdev->dev, "Failed to set AC97 reset functions, unknown board.\n"); + return -EINVAL; + } + + fsl_ssi_ac97_set_reset(phycore_soc_ac97_reset, + phycore_soc_ac97_warm_reset); + + ret = phycore_ac97_setup_devices(pdev); + if (ret) + of_node_put(phycore_dai_cpu_node); + + return ret; +} + +static int imx_phycore_ac97_remove(struct platform_device *pdev) +{ + of_node_put(phycore_dai_cpu_node); + phycore_dai_cpu_node = NULL; + + snd_soc_unregister_card(&imx_phycore); + + platform_device_unregister(imx_phycore_snd_device); + + phycore_ac97_reset = NULL; + phycore_ac97_warm_reset = NULL; + + return 0; +} + +static struct platform_driver imx_phycore_ac97_driver = { + .probe = imx_phycore_ac97_probe, + .remove = imx_phycore_ac97_remove, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = imx_phycore_ac97_of_dev_id, + }, +}; + +module_platform_driver(imx_phycore_ac97_driver); + MODULE_AUTHOR("Sascha Hauer s.hauer@pengutronix.de"); -MODULE_DESCRIPTION("PhyCORE ALSA SoC driver"); +MODULE_DESCRIPTION(DRV_NAME ": PhyCORE ALSA SoC AC97 audio driver"); MODULE_LICENSE("GPL");