On 11/28/2011 4:49 PM, Patrick Lai wrote:
Problem overview:
The CODEC which I am working on transports digital audio through SLIMBUS instead of I2S. The concept of CODEC DAI does not apply too well with SLIMBUS architecture as CODEC DAIs are typically defined base on a set of I2S digital audio interface(bit clock, world select, sd lines). On the CODEC, there are 10 digital capture ports. They can be independently configured as mono channels or can be run-time grouped together to function like multi-channel CODEC DAIs. On top of that, only some ports out of 10 ports can accept all analog mic inputs or digital mic inputs. Hence, even though the CODEC satisfies the concurrent use cases it was designed for, software would have to be articulate on grouping the ports in order to utilize all ports. So, I cannot simply code up CODEC DAI definitions in the CODEC driver for a particular machine. For now, I am looking for compile time grouping of these ports as use cases are known at the time machine is designed.
Proposal: I want to minimize amount of change to soc framework at the same time meeting my requirement.
Here is my proposed design
In CODEC driver, I will declare codec dai for each port. Then, I will enhance ASoC framework to take a list of CODEC DAIs and
To elaborate more on this statement,
I plan on enhancing definition of DAI link to take a list of CODEC DAI instead of single CODEC DAI.
pass list of CODEC DAIs back to callback function such as startup, hw_param, prepare, trigger. I believe this approach will not require massive amount of change to framework.
Your feedback is appreciated.
Thanks Patrick