Hi,
here is my scenario:
ICE1724 card, trying to record from SPDIF input via AK4114, ICE1724 slaved to SPDIF clock from the receiver.
The card detects SPDIF input rate correctly (in my case ESI Juli where AK4114 is provided with independent clock signal to enable the rate detection). Let's say it is 192000.
Now I want to arecord the input stream, let's say in CD quality, using the plug plugin. The command fails, because of the check in ak4114.c:
res = external_rate(rcs1); if (!(flags & AK4114_CHECK_NO_RATE) && runtime && runtime->rate != res) { snd_pcm_stream_lock_irqsave(ak4114->capture_substream, _flags); if (snd_pcm_running(ak4114->capture_substream)) { printk(KERN_DEBUG "rate changed (%i <- %i)\n", runtime->rate, res); snd_pcm_stop(ak4114->capture_substream, SNDRV_PCM_STATE_DRAINING); res = 1; } snd_pcm_stream_unlock_irqrestore(ak4114->capture_substream, _flags); }
The stream gets stopped because res = 192000 and runtime->rate = 44100.
The problem is that the capture device still offers all the available rates, instead of the single SPDIF input one. Thus, the plug plugin is not forced to convert from 192000 to 44100 and runtime->rate is 44100 instead of 192000.
Of course recording at 192000 works fine.
What would be the best way to force the SPDIF capture device to offer (advertise) only the current rate? This functionality would have to be applicable only to the few cards correctly detecting incoming rate (unlike most ice1724 cards without independent clock in slave mode).
If the card cannot detect input frequency reliably (the driver developer should know), I guess it should not do the check in ak4114.c at all - I can prepare a simple patch for that.
The same will most probably apply to cards with AK4117 as the code looks the same.
I know it is a minor issue but if a user hits this problem, it will take him a lot of effort to fix his setup appropriately.
Thanks,
Pavel.