From: Mark Brown broonie@linaro.org
The GPIO manipulation done by this driver is never in atomic context so we can use gpio_set_value_cansleep() and support GPIOs that can't be set from atomic context.
Signed-off-by: Mark Brown broonie@linaro.org --- sound/soc/codecs/adau1701.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/adau1701.c b/sound/soc/codecs/adau1701.c index 2c10252..ebff112 100644 --- a/sound/soc/codecs/adau1701.c +++ b/sound/soc/codecs/adau1701.c @@ -247,21 +247,21 @@ static int adau1701_reset(struct snd_soc_codec *codec, unsigned int clkdiv) gpio_is_valid(adau1701->gpio_pll_mode[1])) { switch (clkdiv) { case 64: - gpio_set_value(adau1701->gpio_pll_mode[0], 0); - gpio_set_value(adau1701->gpio_pll_mode[1], 0); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[0], 0); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[1], 0); break; case 256: - gpio_set_value(adau1701->gpio_pll_mode[0], 0); - gpio_set_value(adau1701->gpio_pll_mode[1], 1); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[0], 0); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[1], 1); break; case 384: - gpio_set_value(adau1701->gpio_pll_mode[0], 1); - gpio_set_value(adau1701->gpio_pll_mode[1], 0); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[0], 1); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[1], 0); break; case 0: /* fallback */ case 512: - gpio_set_value(adau1701->gpio_pll_mode[0], 1); - gpio_set_value(adau1701->gpio_pll_mode[1], 1); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[0], 1); + gpio_set_value_cansleep(adau1701->gpio_pll_mode[1], 1); break; } } @@ -269,10 +269,10 @@ static int adau1701_reset(struct snd_soc_codec *codec, unsigned int clkdiv) adau1701->pll_clkdiv = clkdiv;
if (gpio_is_valid(adau1701->gpio_nreset)) { - gpio_set_value(adau1701->gpio_nreset, 0); + gpio_set_value_cansleep(adau1701->gpio_nreset, 0); /* minimum reset time is 20ns */ udelay(1); - gpio_set_value(adau1701->gpio_nreset, 1); + gpio_set_value_cansleep(adau1701->gpio_nreset, 1); /* power-up time may be as long as 85ms */ mdelay(85); }