On Wed, May 04, 2016 at 07:33:59PM -0300, Fabio Estevam wrote:
From: Fabio Estevam fabio.estevam@nxp.com
On mx6ul the General Purpose Register 1 (GPR1) contains the following bits for configuring the direction of the SAI MCLKs: SAI1_MCLK_DIR, SAI2_MCLK_DIR, SAI3_MCLK_DIR
Introduce the "fsl,sai-mclk-direction-output" optional property to allow configuring the SAI_MCLK outputs.
Tested on a imx6ul-evk board.
Signed-off-by: Fabio Estevam fabio.estevam@nxp.com
Acked-by: Nicolin Chen nicoleotsuka@gmail.com
Thank you Nicolin
Changes since v2:
- Use of_alias_get_id() (Nicolin)
Documentation/devicetree/bindings/sound/fsl-sai.txt | 5 +++++ include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 6 ++++++ sound/soc/fsl/fsl_sai.c | 20 ++++++++++++++++++++ 3 files changed, 31 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt index 777b941..740b467 100644 --- a/Documentation/devicetree/bindings/sound/fsl-sai.txt +++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt @@ -48,6 +48,11 @@ Required properties: receive data by following their own bit clocks and frame sync clocks separately.
+Optional properties (for mx6ul):
- fsl,sai-mclk-direction-output: This is a boolean property. If present,
indicates that SAI will output the SAI MCLK clock.Note:
- If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the default synchronous mode (sync Rx with Tx) will be used, which means both
diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index 238c8db..6835382 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -447,5 +447,11 @@ #define IMX6UL_GPR1_ENET2_CLK_OUTPUT (0x1 << 18) #define IMX6UL_GPR1_ENET_CLK_DIR (0x3 << 17) #define IMX6UL_GPR1_ENET_CLK_OUTPUT (0x3 << 17) +#define IMX6UL_GPR1_SAI1_MCLK_DIR (0x1 << 19) +#define IMX6UL_GPR1_SAI2_MCLK_DIR (0x1 << 20) +#define IMX6UL_GPR1_SAI3_MCLK_DIR (0x1 << 21) +#define IMX6UL_GPR1_SAI_MCLK_MASK (0x7 << 19) +#define MCLK_DIR(x) (x == 1 ? IMX6UL_GPR1_SAI1_MCLK_DIR : x == 2 ? \
IMX6UL_GPR1_SAI2_MCLK_DIR : IMX6UL_GPR1_SAI3_MCLK_DIR)#endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c index d8b673f..2147994 100644 --- a/sound/soc/fsl/fsl_sai.c +++ b/sound/soc/fsl/fsl_sai.c @@ -21,6 +21,8 @@ #include <sound/core.h> #include <sound/dmaengine_pcm.h> #include <sound/pcm_params.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include "fsl_sai.h" #include "imx-pcm.h" @@ -786,10 +788,12 @@ static int fsl_sai_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct fsl_sai *sai;
struct regmap *gpr; struct resource *res; void __iomem *base; char tmp[8]; int irq, ret, i;
int index;
sai = devm_kzalloc(&pdev->dev, sizeof(*sai), GFP_KERNEL); if (!sai)
@@ -878,6 +882,22 @@ static int fsl_sai_probe(struct platform_device *pdev) fsl_sai_dai.symmetric_samplebits = 0; }
- if (of_find_property(np, "fsl,sai-mclk-direction-output", NULL) &&
of_device_is_compatible(pdev->dev.of_node, "fsl,imx6ul-sai")) {gpr = syscon_regmap_lookup_by_compatible("fsl,imx6ul-iomuxc-gpr");if (IS_ERR(gpr)) {dev_err(&pdev->dev, "cannot find iomuxc registers\n");return PTR_ERR(gpr);}index = of_alias_get_id(np, "sai");if (index < 0)return index;regmap_update_bits(gpr, IOMUXC_GPR1, MCLK_DIR(index),MCLK_DIR(index));- }
- sai->dma_params_rx.addr = res->start + FSL_SAI_RDR; sai->dma_params_tx.addr = res->start + FSL_SAI_TDR; sai->dma_params_rx.maxburst = FSL_SAI_MAXBURST_RX;
-- 1.9.1