Use intermediate variable for the data delay needed for the specific format and write the register after the format configuration at once. This will help to control the number of lines as support for more formats going to be added. Also fixes a case when we switch between two formats with different delay requirements.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com --- sound/soc/davinci/davinci-mcasp.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c index 95b38f74e2af..d9ea709cb6d0 100644 --- a/sound/soc/davinci/davinci-mcasp.c +++ b/sound/soc/davinci/davinci-mcasp.c @@ -264,6 +264,7 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai, { struct davinci_mcasp *mcasp = snd_soc_dai_get_drvdata(cpu_dai); int ret = 0; + u32 data_delay;
pm_runtime_get_sync(mcasp->dev); switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { @@ -271,18 +272,25 @@ static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai, case SND_SOC_DAIFMT_AC97: mcasp_clr_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG, FSXDUR); mcasp_clr_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG, FSRDUR); + + /* No delay after FS */ + data_delay = 0; break; default: /* configure a full-word SYNC pulse (LRCLK) */ mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMCTL_REG, FSXDUR); mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMCTL_REG, FSRDUR);
- /* make 1st data bit occur one ACLK cycle after the frame sync */ - mcasp_set_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, FSXDLY(1)); - mcasp_set_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, FSRDLY(1)); + /* 1st data bit occur one ACLK cycle after the frame sync */ + data_delay = 1; break; }
+ mcasp_mod_bits(mcasp, DAVINCI_MCASP_TXFMT_REG, FSXDLY(data_delay), + FSXDLY(3)); + mcasp_mod_bits(mcasp, DAVINCI_MCASP_RXFMT_REG, FSRDLY(data_delay), + FSRDLY(3)); + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { case SND_SOC_DAIFMT_CBS_CFS: /* codec is clock and frame slave */