To handle the soft reboot case, the internal PLL must be disabled in SGTL5000_CHIP_CLK_CTRL before clearing bits SGTL5000_VCOAMP_POWERUP and SGTL5000_PLL_POWERUP in register SGTL5000_CHIP_ANA_POWER.
Signed-off-by: Eric Nelson eric.nelson@boundarydevices.com --- sound/soc/codecs/sgtl5000.c | 9 ++++++++- sound/soc/codecs/sgtl5000.h | 1 + 2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c index c373991..5f7dd5d 100644 --- a/sound/soc/codecs/sgtl5000.c +++ b/sound/soc/codecs/sgtl5000.c @@ -38,7 +38,6 @@ /* default value of sgtl5000 registers */ static const struct reg_default sgtl5000_reg_defaults[] = { { SGTL5000_CHIP_DIG_POWER, 0x0000 }, - { SGTL5000_CHIP_CLK_CTRL, 0x0008 }, { SGTL5000_CHIP_I2S_CTRL, 0x0010 }, { SGTL5000_CHIP_SSS_CTRL, 0x0010 }, { SGTL5000_CHIP_ADCDAC_CTRL, 0x020c }, @@ -1248,6 +1247,14 @@ static int sgtl5000_i2c_probe(struct i2c_client *client, dev_info(&client->dev, "sgtl5000 revision 0x%x\n", rev); sgtl5000->revision = rev;
+ /* reconfigure the clocks in case we're using the PLL */ + ret = regmap_write(sgtl5000->regmap, + SGTL5000_CHIP_CLK_CTRL, + SGTL5000_CHIP_CLK_CTRL_DEFAULT); + if (ret) + dev_err(&client->dev, + "Error %d initializing CHIP_CLK_CTRL\n", ret); + /* Follow section 2.2.1.1 of AN3663 */ ana_pwr = SGTL5000_ANA_POWER_DEFAULT; if (sgtl5000->num_supplies <= VDDD) { diff --git a/sound/soc/codecs/sgtl5000.h b/sound/soc/codecs/sgtl5000.h index 6fdc589..a97e3f4 100644 --- a/sound/soc/codecs/sgtl5000.h +++ b/sound/soc/codecs/sgtl5000.h @@ -92,6 +92,7 @@ /* * SGTL5000_CHIP_CLK_CTRL */ +#define SGTL5000_CHIP_CLK_CTRL_DEFAULT 0x0008 #define SGTL5000_RATE_MODE_MASK 0x0030 #define SGTL5000_RATE_MODE_SHIFT 4 #define SGTL5000_RATE_MODE_WIDTH 2