The apq8016_sbc driver currently works on APQ8016 and MSM8916 devices. It should also work on MSM8909 (and newer SoCs like MSM8917 and MSM8953 if the quinary MI2S line is added); however, newer devices with these SoCs ship with newer firmware that uses a different interface for controlling the digital codec and bit clocks, which causes the driver to fail because it cannot set LPAIF_BIT_CLK.
In order to fix this problem, modify the LPAIF_* clock implementation in the qdsp6 driver to use the newer clock API if a newer firmware version is detected. This seems to be a better solution than exposing the firmware version to other drivers like apq8016_sbc and forcing them to figure out which clock to use.
On MSM8916, a hack is currently used to control the LPAIF_DIG_CLK directly through the GCC driver, but on devices with the newer firmware, the INTERNAL_DIGITAL_CODEC_CORE clock provided by q6afe-clocks in the qdsp6 driver can be used instead. Add a fallback to make this clock work with the older firmware too, allowing one to specify it as the codec's "mclk" in the device tree:
compatible = "qcom,msm8916-wcd-digital-codec"; clocks = <&xo_board>, <&q6afecc LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; clock-names = "ahbix", "mclk"; assigned-clocks = <&q6afecc LPASS_CLK_ID_INTERNAL_DIGITAL_CODEC_CORE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; assigned-clock-rates = <9600000>;
This works both on MSM8916 and on the newer SoCs mentioned above.
Otto Pflüger (3): ASoC: qcom: q6core: expose ADSP core firmware version ASoC: qcom: q6afe: check ADSP version when setting clocks ASoC: qcom: q6afe: remove "port already open" error
sound/soc/qcom/qdsp6/q6afe.c | 85 +++++++++++++++++++++++++++++++++-- sound/soc/qcom/qdsp6/q6core.c | 61 +++++++++++++++++++++++++ sound/soc/qcom/qdsp6/q6core.h | 9 ++++ 3 files changed, 152 insertions(+), 3 deletions(-)
base-commit: e3b18f7200f45d66f7141136c25554ac1e82009b