From: Yong Zhi yong.zhi@intel.com
In commit d696a61413b4 ("ASoC: rt1015: Add condition to prevent SoC providing bclk in ratio of 50 times of sample rate."), PLL input at 50fs is no longer supported, the new recommended settings at 48Khz rate are:
PLL input SSP bclk ------------------------ 64fs 3.073Mhz 100fs 4.8Mhz
(bclk update is reflected in topoplogy.)
Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Signed-off-by: Yong Zhi yong.zhi@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com --- sound/soc/intel/boards/sof_rt5682.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/sound/soc/intel/boards/sof_rt5682.c b/sound/soc/intel/boards/sof_rt5682.c index cc8b0f26f724..61a61dcca82a 100644 --- a/sound/soc/intel/boards/sof_rt5682.c +++ b/sound/soc/intel/boards/sof_rt5682.c @@ -284,8 +284,15 @@ static int sof_rt1015_hw_params(struct snd_pcm_substream *substream, return 0;
for_each_rtd_codec_dais(rtd, i, codec_dai) { + /* Set tdm/i2s1 master bclk ratio */ + ret = snd_soc_dai_set_bclk_ratio(codec_dai, 64); + if (ret < 0) { + dev_err(card->dev, "failed to set bclk ratio\n"); + return ret; + } + ret = snd_soc_dai_set_pll(codec_dai, 0, RT1015_PLL_S_BCLK, - params_rate(params) * 50, + params_rate(params) * 64, params_rate(params) * 256); if (ret < 0) { dev_err(card->dev, "failed to set pll\n");