The patch
ASoC: uniphier: add support for multichannel output
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks, Mark
From 8fc9983db199bb397d48e32a6400765b70f1995a Mon Sep 17 00:00:00 2001
From: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com Date: Fri, 27 Jul 2018 11:37:28 +0900 Subject: [PATCH] ASoC: uniphier: add support for multichannel output
This patch adds multichannel PCM output support for LD11/LD20. Currently driver tested and supported only 2ch, 6ch, and 8ch.
Signed-off-by: Katsuhiro Suzuki suzuki.katsuhiro@socionext.com Signed-off-by: Mark Brown broonie@kernel.org --- sound/soc/uniphier/aio-core.c | 78 ++++++++++++++++++++++++++++++++--- sound/soc/uniphier/aio-ld11.c | 2 +- sound/soc/uniphier/aio-reg.h | 1 + sound/soc/uniphier/aio.h | 3 ++ 4 files changed, 78 insertions(+), 6 deletions(-)
diff --git a/sound/soc/uniphier/aio-core.c b/sound/soc/uniphier/aio-core.c index 638cb3fc5f7b..8b09bbb0f8d0 100644 --- a/sound/soc/uniphier/aio-core.c +++ b/sound/soc/uniphier/aio-core.c @@ -264,6 +264,57 @@ void aio_port_reset(struct uniphier_aio_sub *sub) } }
+/** + * aio_port_set_ch - set channels of LPCM + * @sub: the AIO substream pointer, PCM substream only + * @ch : count of channels + * + * Set suitable slot selecting to input/output port block of AIO. + * + * This function may return error if non-PCM substream. + * + * Return: Zero if successful, otherwise a negative value on error. + */ +static int aio_port_set_ch(struct uniphier_aio_sub *sub) +{ + struct regmap *r = sub->aio->chip->regmap; + u32 slotsel_2ch[] = { + 0, 0, 0, 0, 0, + }; + u32 slotsel_multi[] = { + OPORTMXTYSLOTCTR_SLOTSEL_SLOT0, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT1, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT2, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT3, + OPORTMXTYSLOTCTR_SLOTSEL_SLOT4, + }; + u32 mode, *slotsel; + int i; + + switch (params_channels(&sub->params)) { + case 8: + case 6: + mode = OPORTMXTYSLOTCTR_MODE; + slotsel = slotsel_multi; + break; + case 2: + mode = 0; + slotsel = slotsel_2ch; + break; + default: + return -EINVAL; + } + + for (i = 0; i < AUD_MAX_SLOTSEL; i++) { + regmap_update_bits(r, OPORTMXTYSLOTCTR(sub->swm->oport.map, i), + OPORTMXTYSLOTCTR_MODE, mode); + regmap_update_bits(r, OPORTMXTYSLOTCTR(sub->swm->oport.map, i), + OPORTMXTYSLOTCTR_SLOTSEL_MASK, slotsel[i]); + } + + return 0; +} + /** * aio_port_set_rate - set sampling rate of LPCM * @sub: the AIO substream pointer, PCM substream only @@ -575,6 +626,10 @@ int aio_port_set_param(struct uniphier_aio_sub *sub, int pass_through, rate = params_rate(params); }
+ ret = aio_port_set_ch(sub); + if (ret) + return ret; + ret = aio_port_set_rate(sub, rate); if (ret) return ret; @@ -731,15 +786,28 @@ void aio_port_set_volume(struct uniphier_aio_sub *sub, int vol) int aio_if_set_param(struct uniphier_aio_sub *sub, int pass_through) { struct regmap *r = sub->aio->chip->regmap; - u32 v; + u32 memfmt, v;
if (sub->swm->dir == PORT_DIR_OUTPUT) { - if (pass_through) + if (pass_through) { v = PBOUTMXCTR0_ENDIAN_0123 | PBOUTMXCTR0_MEMFMT_STREAM; - else - v = PBOUTMXCTR0_ENDIAN_3210 | - PBOUTMXCTR0_MEMFMT_2CH; + } else { + switch (params_channels(&sub->params)) { + case 2: + memfmt = PBOUTMXCTR0_MEMFMT_2CH; + break; + case 6: + memfmt = PBOUTMXCTR0_MEMFMT_6CH; + break; + case 8: + memfmt = PBOUTMXCTR0_MEMFMT_8CH; + break; + default: + return -EINVAL; + } + v = PBOUTMXCTR0_ENDIAN_3210 | memfmt; + }
regmap_write(r, PBOUTMXCTR0(sub->swm->oif.map), v); regmap_write(r, PBOUTMXCTR1(sub->swm->oif.map), 0); diff --git a/sound/soc/uniphier/aio-ld11.c b/sound/soc/uniphier/aio-ld11.c index ab04d3331be9..de962df245ba 100644 --- a/sound/soc/uniphier/aio-ld11.c +++ b/sound/soc/uniphier/aio-ld11.c @@ -286,7 +286,7 @@ static struct snd_soc_dai_driver uniphier_aio_dai_ld11[] = { .formats = SNDRV_PCM_FMTBIT_S32_LE, .rates = SNDRV_PCM_RATE_48000, .channels_min = 2, - .channels_max = 2, + .channels_max = 8, }, .ops = &uniphier_aio_i2s_ops, }, diff --git a/sound/soc/uniphier/aio-reg.h b/sound/soc/uniphier/aio-reg.h index 45fdc6ae358a..734395dbcffb 100644 --- a/sound/soc/uniphier/aio-reg.h +++ b/sound/soc/uniphier/aio-reg.h @@ -374,6 +374,7 @@ #define OPORTMXTYVOLGAINSTATUS(n, m) (0x42108 + 0x400 * (n) + 0x20 * (m)) #define OPORTMXTYVOLGAINSTATUS_CUR_MASK GENMASK(15, 0) #define OPORTMXTYSLOTCTR(n, m) (0x42114 + 0x400 * (n) + 0x20 * (m)) +#define OPORTMXTYSLOTCTR_MODE BIT(15) #define OPORTMXTYSLOTCTR_SLOTSEL_MASK GENMASK(11, 8) #define OPORTMXTYSLOTCTR_SLOTSEL_SLOT0 (0x8 << 8) #define OPORTMXTYSLOTCTR_SLOTSEL_SLOT1 (0x9 << 8) diff --git a/sound/soc/uniphier/aio.h b/sound/soc/uniphier/aio.h index aa89c2f6fa24..23a5c3c68658 100644 --- a/sound/soc/uniphier/aio.h +++ b/sound/soc/uniphier/aio.h @@ -141,6 +141,9 @@ enum IEC61937_PC { #define AUD_MIN_FRAGMENT_SIZE (4 * 1024) #define AUD_MAX_FRAGMENT_SIZE (16 * 1024)
+/* max 5 slots, 10 channels, 2 channel in 1 slot */ +#define AUD_MAX_SLOTSEL 5 + /* * This is a selector for virtual register map of AIO. *