Re: [PATCH v2 1/2] ASoC: dt-bindings: qcom, wsa883x: Use correct SD_N polarity

On 10/11/2022 13:35, Krzysztof Kozlowski wrote:

Use correct polarity in example and powerdown-gpios description.

Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

Reviewed-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org

---

Changes since v1:

1. New patch.

---

Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml index 6113f65f2990..99f9c10bbc83 100644 --- a/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml +++ b/Documentation/devicetree/bindings/sound/qcom,wsa883x.yaml @@ -23,7 +23,7 @@ properties: maxItems: 1

powerdown-gpios:

• description: GPIO spec for Powerdown/Shutdown line to use

• description: GPIO spec for Powerdown/Shutdown line to use (pin SD_N) maxItems: 1

  vdd-supply:

@@ -47,6 +47,8 @@ additionalProperties: false

examples: - |

• #include <dt-bindings/gpio/gpio.h>

• soundwire-controller@3250000 {
      #address-cells = <2>;
      #size-cells = <0>;
  

@@ -55,7 +57,7 @@ examples: speaker@0,1 { compatible = "sdw10217020200"; reg = <0 1>;

•        powerdown-gpios = <&tlmm 1 0>;
  

•        powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
          vdd-supply = <&vreg_s10b_1p8>;
          #thermal-sensor-cells = <0>;
          #sound-dai-cells = <0>;
  

@@ -64,7 +66,7 @@ examples: speaker@0,2 { compatible = "sdw10217020200"; reg = <0 2>;

•        powerdown-gpios = <&tlmm 89 0>;
  

•        powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>;
          vdd-supply = <&vreg_s10b_1p8>;
          #thermal-sensor-cells = <0>;
          #sound-dai-cells = <0>;