Re: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format

On Tue, Aug 04, 2020 at 01:37:33PM +0530, Rohit kumar wrote:

Update lpass-cpu binding with yaml formats.

Signed-off-by: Rohit kumar rohitkr@codeaurora.org

.../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 --------------- .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++++++ 2 files changed, 179 insertions(+), 130 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml

diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt deleted file mode 100644 index c07202c..00000000 --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt +++ /dev/null @@ -1,130 +0,0 @@ -* Qualcomm Technologies LPASS CPU DAI

-This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS).

-Required properties:

-- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or

• 	  "qcom,sc7180-lpass-cpu"
  

-- clocks : Must contain an entry for each entry in clock-names. -- clock-names : A list which must include the following entries:

• 		* "ahbix-clk"
  

• 		* "mi2s-osr-clk"
  

• 		* "mi2s-bit-clk"
  

• 	: required clocks for "qcom,lpass-cpu-apq8016"
  

• 		* "ahbix-clk"
  

• 		* "mi2s-bit-clk0"
  

• 		* "mi2s-bit-clk1"
  

• 		* "mi2s-bit-clk2"
  

• 		* "mi2s-bit-clk3"
  

• 		* "pcnoc-mport-clk"
  

• 		* "pcnoc-sway-clk"
  

• 	: required clocks for "qcom,lpass-cpu-sc7180"
  

• 		* "audio-core"
  

• 		* "mclk0"
  

• 		* "mi2s-bit-clk0"
  

• 		* "mi2s-bit-clk1"
  

• 		* "pcnoc-sway-clk"
  

• 		* "pcnoc-mport-clk"
  

-- interrupts : Must contain an entry for each entry in

• 	  interrupt-names.
  

-- interrupt-names : A list which must include the following entries:

• 		* "lpass-irq-lpaif"
  

-- pinctrl-N : One property must exist for each entry in

• 	  pinctrl-names.  See ../pinctrl/pinctrl-bindings.txt
  

• 	  for details of the property values.
  

-- pinctrl-names : Must contain a "default" entry. -- reg : Must contain an address for each entry in reg-names. -- reg-names : A list which must include the following entries:

• 		* "lpass-lpaif"
  

-- #address-cells : Must be 1 -- #size-cells : Must be 0

-Optional properties:

-- qcom,adsp : Phandle for the audio DSP node

-By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. -The SD lines to use can be configured by adding subnodes for each of the DAIs.

-Required properties for each DAI (represented by a subnode): -- reg : Must be one of the DAI IDs

• 	  (usually part of dt-bindings header)
  

-- qcom,playback-sd-lines: List of serial data lines to use for playback

• 	  Each SD line should be represented by a number from 0-3.
  

-- qcom,capture-sd-lines : List of serial data lines to use for capture

• 	  Each SD line should be represented by a number from 0-3.
  

-Note that adding a subnode changes the default to "no lines configured", -so both playback and capture lines should be configured when a subnode is added.

-Examples: -1)

-lpass@28100000 {

• compatible = "qcom,lpass-cpu";
• clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>;
• clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk";
• interrupts = <0 85 1>;
• interrupt-names = "lpass-irq-lpaif";
• pinctrl-names = "default", "idle";
• pinctrl-0 = <&mi2s_default>;
• pinctrl-1 = <&mi2s_idle>;
• reg = <0x28100000 0x10000>;
• reg-names = "lpass-lpaif";
• qcom,adsp = <&adsp>;
• #address-cells = <1>;
• #size-cells = <0>;
• /* Optional to set different MI2S SD lines */
• dai@3 {

• reg = <MI2S_QUATERNARY>;
  

• qcom,playback-sd-lines = <0 1>;
  

• };

-};

-2)

-#include <dt-bindings/sound/sc7180-lpass.h>

-lpass_cpu: lpass {

• compatible = "qcom,sc7180-lpass-cpu";
• reg = <0 0x62F00000 0 0x29000>;
• iommus = <&apps_smmu 0x1020 0>;
• power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>;
• clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>,

• <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>,
  

• <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>,
  

• <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>,
  

• <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>,
  

• <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>;
  

• clock-names = "pcnoc-sway-clk", "audio-core",

• 	"mclk0", "pcnoc-mport-clk",
  

• 	"mi2s-bit-clk0", "mi2s-bit-clk1";
  

• interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>;
• interrupt-names = "lpass-irq-lpaif";
• #sound-dai-cells = <1>;
• #address-cells = <1>;
• #size-cells = <0>;
• mi2s-primary@0 {

• reg = <MI2S_PRIMARY>;
  

• qcom,playback-sd-lines = <1>;
  

• qcom,capture-sd-lines = <0>;
  

• };
• mi2s-secondary@1 {

• reg = <MI2S_SECONDARY>;
  

• qcom,playback-sd-lines = <0>;
  

• };

-}; diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml new file mode 100644 index 00000000..5c1881d --- /dev/null +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml @@ -0,0 +1,179 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings

+maintainers:

• • Srinivas Kandagatla srinivas.kandagatla@linaro.org
• • Rohit kumar rohitkr@codeaurora.org

+description: |

• Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist
• of MI2S interface for audio data transfer on external codecs. LPASS cpu driver
• is a module to configure Low-Power Audio Interface(LPAIF) core registers
• across different IP versions.

+properties:

• compatible:
• enum:

•  - qcom,lpass-cpu
  

•  - qcom,apq8016-lpass-cpu
  

•  - qcom,sc7180-lpass-cpu
  

• reg:
• maxItems: 1
• description: LPAIF core registers
• clocks:
• minItems: 3
• maxItems: 6
• clock-names:
• minItems: 3
• maxItems: 6
• interrupts:
• maxItems: 1
• description: LPAIF DMA buffer interrupt
• qcom,adsp:
• $ref: /schemas/types.yaml#/definitions/phandle
• description: Phandle for the audio DSP node
• iommus:
• maxItems: 1
• description: Phandle to apps_smmu node with sid mask
• power-domains:
• maxItems: 1
• '#sound-dai-cells':
• const: 1
• '#address-cells':
• const: 1
• '#size-cells':
• const: 0

+patternProperties:

• "(^mi2s-[0-9a-f]$|mi2s)":

I believe this will work:

"^mi2s(-[0-9a-f])?$"

• type: object
• description: Required properties for each DAI
• properties:

•  reg:
  

•    maxItems: 1
  

•    description: Must be one of the DAI ID
  

• required:

•  - reg
  

additionalProperties: false

+required:

• • compatible
• • reg
• • clocks
• • clock-names
• • interrupts
• • '#sound-dai-cells'

+additionalProperties: false

+allOf:

• • if:

•  properties:
  

•    compatible:
  

•      contains:
  

•        const: qcom,lpass-cpu
  

• then:

•  properties:
  

•    clock-names:
  

•      items:
  

•        - const: ahbix-clk
  

•        - const: mi2s-osr-clk
  

•        - const: mi2s-bit-clk
  

• • if:

•  properties:
  

•    compatible:
  

•      contains:
  

•        const: qcom,apq8016-lpass-cpu
  

• then:

•  properties:
  

•    clock-names:
  

•      items:
  

•        - const: ahbix-clk
  

•        - const: mi2s-bit-clk0
  

•        - const: mi2s-bit-clk1
  

•        - const: mi2s-bit-clk2
  

•        - const: mi2s-bit-clk3
  

•        - const: pcnoc-mport-clk
  

•        - const: pcnoc-sway-clk
  

• • if:

•  properties:
  

•    compatible:
  

•      contains:
  

•        const: qcom,sc7180-lpass-cpu
  

• then:

•  properties:
  

•    clock-names:
  

•      items:
  

•        - const: pcnoc-sway-clk
  

•        - const: audio-core
  

•        - const: mclk0
  

•        - const: pcnoc-mport-clk
  

•        - const: mi2s-bit-clk0
  

•        - const: mi2s-bit-clk1
  

•  required:
  

•    - iommus
  

•    - power-domains
  

+examples:

• • |
• #include <dt-bindings/sound/sc7180-lpass.h>
• soc {

•    #address-cells = <2>;
  

•    #size-cells = <2>;
  

•    lpass@62f00000 {
  

•        compatible = "qcom,sc7180-lpass-cpu";
  

•        reg = <0 0x62f00000  0 0x29000>;
  

•        iommus = <&apps_smmu 0x1020 0>;
  

•        power-domains = <&lpass_hm 0>;
  

•        clocks = <&gcc 131>,
  

•             <&lpasscorecc 6>,
  

•             <&lpasscorecc 7>,
  

•             <&lpasscorecc 10>,
  

•             <&lpasscorecc 8>,
  

•             <&lpasscorecc 9>;
  

•        clock-names = "pcnoc-sway-clk", "audio-core",
  

•                      "mclk0", "pcnoc-mport-clk",
  

•                      "mi2s-bit-clk0", "mi2s-bit-clk1";
  

•        interrupts = <0 160 1>;
  

•        #sound-dai-cells = <1>;
  

•        #address-cells = <1>;
  

•        #size-cells = <0>;
  

•        /* Optional to set different MI2S SD lines */
  

•        mi2s-primary@0 {
  

•            reg = <MI2S_PRIMARY>;
  

•            qcom,playback-sd-lines = <1>;
  

•            qcom,capture-sd-lines = <0>;
  

These 2 aren't documented.

Rob