From: Niklas Carlsson niklasc@axis.com
DSP_RUN and DSP_ENABLE needs to be disabled during FW load. This is not a problem after power-cycling but for soft reboots.
Signed-off-by: Niklas Carlsson niklasc@axis.com --- sound/soc/codecs/adau1761.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
diff --git a/sound/soc/codecs/adau1761.c b/sound/soc/codecs/adau1761.c index bef3e9e74c26..3075c13bcbbc 100644 --- a/sound/soc/codecs/adau1761.c +++ b/sound/soc/codecs/adau1761.c @@ -460,8 +460,35 @@ static int adau1761_set_bias_level(struct snd_soc_component *component, regmap_update_bits(adau->regmap, ADAU17X1_CLOCK_CONTROL, ADAU17X1_CLOCK_CONTROL_SYSCLK_EN, ADAU17X1_CLOCK_CONTROL_SYSCLK_EN); - if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) + if (snd_soc_component_get_bias_level(component) == + SND_SOC_BIAS_OFF) { + /* + * When going OFF -> STANDBY, the device can be in two + * states: + * 1) Power-cycled and reset + * 2) Soft reboot + * In the case of soft reboot, we need to sync the HW + * registers even if our regmap reports default values. + * Marking the cache as dirty ensures that both cases + * are handled. + */ + regcache_mark_dirty(adau->regmap); regcache_sync(adau->regmap); + /* + * In order for FW to load correctly, the device needs + * DSP_RUN and DSP_ENABLE to be 0. This might not be the + * case for soft reboots. Ensure that DSP_RUN and + * DSP_ENABLE is 0 by bypassing the cache and write + * directly to HW when going OFF -> STANDBY. + */ + if (adau17x1_has_dsp(adau)) { + regcache_cache_bypass(adau->regmap, true); + regmap_write(adau->regmap, ADAU17X1_DSP_RUN, 0); + regmap_write(adau->regmap, + ADAU17X1_DSP_ENABLE, 0); + regcache_cache_bypass(adau->regmap, false); + } + } break; case SND_SOC_BIAS_OFF: regmap_update_bits(adau->regmap, ADAU17X1_CLOCK_CONTROL,