Add some additional information in comments and my copyright.
Signed-off-by: Roman Volkov v1ron@mail.ru --- sound/pci/oxygen/xonar_dg.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/sound/pci/oxygen/xonar_dg.c b/sound/pci/oxygen/xonar_dg.c index 77acd79..b806cc1 100644 --- a/sound/pci/oxygen/xonar_dg.c +++ b/sound/pci/oxygen/xonar_dg.c @@ -1,8 +1,8 @@ /* - * card driver for the Xonar DG/DGX + * Card driver for the Xonar DG/DGX * * Copyright (c) Clemens Ladisch clemens@ladisch.de - * + * Copyright (c) Roman Volkov v1ron@mail.ru * * This driver is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2. @@ -20,27 +20,35 @@ * Xonar DG/DGX * ------------ * + * CS4245 and CS4361 both will mute all outputs if any clock ratio + * is invalid. + * * CMI8788: * * SPI 0 -> CS4245 * + * Playback: * I²S 1 -> CS4245 * I²S 2 -> CS4361 (center/LFE) * I²S 3 -> CS4361 (surround) * I²S 4 -> CS4361 (front) + * Capture: + * I²S ADC 1 <- CS4245 * * GPIO 3 <- ? * GPIO 4 <- headphone detect - * GPIO 5 -> route input jack to line-in (0) or mic-in (1) - * GPIO 6 -> route input jack to line-in (0) or mic-in (1) - * GPIO 7 -> enable rear headphone amp + * GPIO 5 -> enable ADC analog circuit for the left channel + * GPIO 6 -> enable ADC analog circuit for the right channel + * GPIO 7 -> switch green rear output jack between CS4245 and + * and the first channel of CS4361 (mechanical relay) * GPIO 8 -> enable output to speakers * * CS4245: * + * input 0 <- mic * input 1 <- aux * input 2 <- front mic - * input 4 <- line/mic + * input 4 <- line * DAC out -> headphones * aux out -> front panel headphones */